WeePly34

It has been a while, took some time to save $$$ for new enclosure. I purchased a Terramaster f4-424 Proto replace the usb enclosure. I also bought a new usb stick (as I was told the existing one is too large to fit inside the enclosure to use as boot drive. Do I just copy the existing one or should I just follow the steps as if starting new? Anything I need to do for the key/license? Truly appreciate everyone help here!🙏

unfortunately I do not have a sata port available. and it is frustrating that this system was working fine for almost a year then this happens...

new Diags tower-diagnostics-20250125-1252.zip

no I reverted back to v6.12.14 I reverted back thinking it would fix the issue.

This is what came from lsusb -t /: Bus 02.Port 1: Dev 1, Class=root_hub, Driver=xhci_hcd/6p, 5000M |__ Port 2: Dev 2, If 0, Class=Mass Storage, Driver=usb-storage, 5000M |__ Port 6: Dev 3, If 0, Class=Mass Storage, Driver=usb-storage, 5000M /: Bus 01.Port 1: Dev 1, Class=root_hub, Driver=xhci_hcd/14p, 480M |__ Port 2: Dev 2, If 0, Class=Hub, Driver=hub/3p, 12M |__ Port 1: Dev 4, If 0, Class=Human Interface Device, Driver=usbhid, 1.5M |__ Port 1: Dev 4, If 1, Class=Human Interface Device, Driver=usbhid, 1.5M |__ Port 7: Dev 3, If 0, Class=Video, Driver=, 480M |__ Port 7: Dev 3, If 1, Class=Video, Driver=, 480M |__ Port 7: Dev 3, If 2, Class=Vendor Specific Class, Driver=, 480M |__ Port 8: Dev 5, If 0, Class=Hub, Driver=hub/3p, 12M |__ Port 3: Dev 8, If 0, Class=Vendor Specific Class, Driver=btusb, 12M |__ Port 3: Dev 8, If 1, Class=Wireless, Driver=btusb, 12M |__ Port 3: Dev 8, If 2, Class=Vendor Specific Class, Driver=btusb, 12M |__ Port 3: Dev 8, If 3, Class=Application Specific Interface, Driver=, 12M

okay, it was in the trash can... so I "salvaged" it to the desktop: tower-diagnostics-20250118-1521.zip

which part of the diagnostics? I just see a folder with a lot of stuff in it. as stated, I am a total beginner with this, so I apologize for not knowing what to do or what to post.

I recently attempted to update to 7.0 when I restarted the system I received error messages that the drives were "unmountable" and incorrect. I have Western Digital 14TB disks in a 4 bay array. 1 parity and 3 data. they are now showing as JMicron 130PB USB instead of the WD drives. (when I click on the "Identity" tab is shows the WD info and 14TB... a friend told me to restart the array and it would sort itself out. I stopped the array when the "Time To Completion" hovered at 15,000 DAYS. how do I fix this. All information that is in the array is still stored on another hard drive in my office, so I am not worried about losing everything and starting from scratch. I am a total technical Noob and do not understand half the technical jargon I am reading here. I searched the forums for drives not showing correct information, but did not see anything that was like my situation. Thank you, extremely, for the assistance... IMG_3223.HEIC IMG_3224.HEIC