vxzero

I looked through an older diagnostic dump and found that under Unraid 6.x and Linux 6.1 it was using the QLGE driver. Upon upgrading to Unraid 7x this driver no longer exists due to Linux dropping support for it in Linux 6.6. Here's an article mentioning this https://www.phoronix.com/news/QLogic-10Gb-QLGE-Driver-Dropped It looks like I may have to replace the card.

JorgeB, I've run that command and I'm attaching the new diagnostics. MAM59, I looked through the logs in the previous version of Unraid and saw that same errors. What's interesting is that this configuration has been working since 2019. The only thing that changed was the version of Unraid. This is a very old MB and the 10G card was purchased off of eBay, so it's likely old as well. If I need to replace them, I'm not opposed to it, I'd just like to save some money by trying to troubleshoot the issue first. hive-diagnostics-20250615-1114.zip I also found that the 10Gb NIC is showing UNCLAIMED when running a lshw -class network lshw -class network *-network:0 UNCLAIMED description: Ethernet controller product: 10GbE Converged Network Adapter (TCP/IP Networking) vendor: QLogic Corp. physical id: 0 bus info: pci@0000:01:00.0 version: 02 width: 64 bits clock: 33MHz capabilities: pm pciexpress msi vpd msix bus_master cap_list configuration: latency=0 resources: ioport:e300(size=256) memory:f790c000-f790ffff memory:f7700000-f77fffff memory:f78c0000-f78fffff *-network:1 UNCLAIMED description: Ethernet controller product: 10GbE Converged Network Adapter (TCP/IP Networking) vendor: QLogic Corp. physical id: 0.1 bus info: pci@0000:01:00.1 version: 02 width: 64 bits clock: 33MHz capabilities: pm pciexpress msi vpd msix bus_master cap_list configuration: latency=0 resources: ioport:e200(size=256) memory:f7908000-f790bfff memory:f7600000-f76fffff memory:f7880000-f78bffff

Diagnostics attached. hive-diagnostics-20250614-2105.zip

Hi everyone, I'm hoping to get some assistance with a frustrating issue I've been facing since upgrading to Unraid 7.X. My 10Gb network interface card (NIC) was functioning perfectly with version 6, but now it no longer works across several versions of 7. Currently, I'm running on a 1Gb Realtek onboard NIC, which is not ideal for my setup, and I would like to get the 10Gb NIC working again. Here are some details about my setup: - Unraid version: 7.1.2 - NIC model: QLogic QLE8152 - NIC appears in dmesg - ifconfig -a shows no 10Gb NICs - dmesg output attached I would appreciate any advice or solutions that could help me resolve this issue. Has anyone else experienced similar problems with their 10Gb NIC in Unraid 7.X? dmesg.txt