Fergin

Hi Not sure if this is right place so apologies if not I’ve installed Roon on unraid no issues and working great, I’ve also installed the Roon extension manager, when I try and look at extension in Roon it states ‘extension manager requires docked’ it is running in docker so I don’t understand, can anyone help Regards Fergin

Just an update, might help someone else After swapping drive had another disappear from array, and couldn’t do a parity check kept going to zero, after messing about with cables swapping sata drives, but the bullet and purchased a new psu, which arrived today, no more problems, even failed drive has passed a quick smart test, parity rebuilding as we speak and drive which sowed errors on full test, I guess power supply as suggested can make a big difference Regards Fergin

Hi Did some cable swapping but one of the drives has failed, replaced with new and all seems fine, so I guess it was a failing drive, thanks for your help Regards Fergin

Thanks, The odd thing is the parity check suddenly jumped to approx 120mb/s and seems to be staying there, I’ll leave it run for now, when finished will swap disk 5 from one controller to another as suggested and post logs Thanks for help Fergin

Hi Just changed all sata cables for new, checked all power cables and removed any unnecessary power splitters, still same result, short of buying a new psu, is there anything else you could suggest, server is working normally except slow parity Regards Fergin unraid-diagnostics-20251211-1411.zip

Thanks I’m going to try new sata cables on all Hdds, I do have a few power splitters I’ll try and look at psu as well, thanks for your help I’ll post back when I’ve changed out a few things Fergin

Thanks New diag during parity check Thanks unraid-diagnostics-20251210-1704.zip

Hi Just replaced cable for brand new sata cable and same result, any other ideas Regards Fergin

Hi My parity check is estimated to take days, the rate on drives drops to 0 and shows a very low read figure of approx 3mbs, I have stopped all dockers and checked drives which seem fine, everything is working as expected apart from parity check, could someone have a look at my logs and advise accordingly Kind regards Fergin unraid-diagnostics-20251210-1005.zip