n4152394

In conclusion where I put 2 cache disks or I save the "appdata" directory and I ignore the message. Sorry for understanding, I go through my friend Google. Thank you for everything and your patience

Hello, I just put two 4 TB disks in parity as requested and that does not change anything. I relaunched the "Parity-Check" The cache is still not protected, I didn't have that on the old version.

ok But in the cache there is also the "System" directory and "cabackup" only manages a directory and not the disk

I have a 4 TB parity disk and 3 4TB discs in shares 1 ssd of 500Mo m2 for the cover the problem is on the files on the cache in "only" "appdata" example

Hello everyone, lately, I have a message (yellow triangle) "All Files Unprotected" only on my cache ssd So all the files that are on the cache are not protected How to fix this problem please

thank you for your help after test it does not change anything for you that comes from what knowing that the problem appeared suddenly I did a test with all the idem drive letter do you have another idea

good evening everyone I encounter this error message how can i fix this problem on its 2 disks I do not see the diferences with others Write Cache is disabled on disk1You may experience slow read/writes to disk1. Write Cache should be enabled for better results. Post your diagnostics for other users to confirm this test and advise. NOTE: If this drive is connected to your server via USB, then this test and the fix may or may not work / be accurate as USB support for smartctl and hdparm is hit and miss Write Cache is disabled on disk8You may experience slow read/writes to disk8. Write Cache should be enabled for better results. Post your diagnostics for other users to confirm this test and advise. NOTE: If this drive is connected to your server via USB, then this test and the fix may or may not work / be accurate as USB support for smartctl and hdparm is hit and miss berry-diagnostics-20190623-1726.zip

ok ok thanks to all

after running "xfs_repair" all my disks are visible, I miss 11% of the data. I miss 22 shares and have created a "lost + found" shares how to put all that in order attached new diagnostic berry-diagnostics-20190609-1559.zip

I put the disc back in "xfs" then redemar it does not change anything berry-diagnostics-20190609-1052.zip

hello, attached the file thank you for your help berry-diagnostics-20190609-0731.zip

Hello everyone, I disabled 10 disks from my server to test In the disc of the discs With a message "Unmountable: No file system" «Unmountable disks present: with the list of 10 disks and me the formatting request My parity disk was not used during my tests The disks were in "xfs" format now declare in "auto" Messages in "System Log" bad option, bad superblock under / dev / md1, code page or auxiliary program missing or other error. What solution to adopt to recover data Thank you for your help in advance Ps I speak in French, I hope the google translation is correct

ok thanks for everything

ok thank you it reassures me, but how to make clean all his messages and login errors sshd[2980]: Server listening on 0.0.0.0 port 22. sshd[2980]: Server listening on :: port 22. sshd[2980]: Received signal 15; terminating.

ok how to activate "ACPI: Early table checksum verification disabled"