shootking

Did you get the urbackup to run in an VM or an docker container?

I am also wondering about urbackup. Is it possible to run in an VM? Or are there any other urbackup docker container available?

Hello! Ok, I tried one more time and now it worked. Very strange as the unRAID have had network connection at the times when I have tested it. Well now it is solved. Thanks bonienl! Kind regards Jens

Hello! I have shutdown my unraid several times during the last days due to disk upgrade and thunderstorms in the neighbourhood. Today I found out something strange with my docker containers. It says "Version: not available" on each of them. I dont know where to begin looking for errors. All of them were working a few days ago. I have done the restart, disable and enable docker service. But I cannot get the version not available to disappear. The containers seems to work. I can connect to their web gui and interact with them. I can also start/stop/restart without error messages. Any help would be greatly appreciated! Kind regards Jens

Thx! Seems to be working as it should! /Jens

Hello! I have searched the forum for a post about changing slot for two disks. All I found was a post from 2010 and I didnt want to try that method. I have removed a disk for a long time ago (disk 3) so this is already done. Parity is valid. All I want to do is to move the disk 4 to the slot 3 and the disk 5 to slot 4. How can I do this without recalculating parity and loose any data?

Hello btrfs filesystem show: btrfs filesystem df: btrfs scrub status: Kind regards Jens

Sorry, byt I cant find the cache web page... Edited: found it! It says: Am I alright now? Is this message meaning that I havent got a cache pool anymore? Kind regards Jens

Hello! I have a setup with 2 cache drives in a cache pool. I want to remove one of them and only use 1 cache drive. I have searched the forum and found some posts about this, and there it is mentioned that I could remove one drive and then do a "rebalance" of the pool. But I dont find where to do this. I have tried to remove one of the rives, but the array only shows Disk missing... Anyone who can help me? Where to read about this? Kind regards Jens

Hello! I have no disk 3 as I removed it a few weeks ago. Is it possible to re-arrange disk 4 to slot 3 and disk 5 to slot 4 without rebuilding parity? I have removed the mapping for the crashplan container. I dont know what it was for, probably a misconfiguration. I have done the check disk on disk 4 with the array in maintenance mode. But no errors on disk 4. I have removed the .Download folder and all other folders with a . in the beginning. I have made the donwload share to an ordinary share with the setting that it should be contained on the cache drive. I attach another diagnostis file if you could take a look at it. No idea why my disk 4 is empty? Thanks! /Jens unraid-diagnostics-20161111-2204.zip

Diagnostics zip coming up! unraid-diagnostics-20161111-1542.zip

Hello! I redid my unraid volume a few weeks ago. I reformatted some drives, changed some old ones for new. I also changed files system to xfs. Now I hav two problems: 1. I am experiencing problems with my cache drive. I have a folder called .Download on my cache drive. When I download new files to this drive, the files end up on Disk 4 in a folder with the name .Download. 2 Also no other data lands on this disk, which make me belive that the disk 4 is not included in the unraid disk volume anymore. I have looked through Global Share Settings and the Shares settings. Nothing that I see there says anything about excluding Disk 4. What settings have I not found? What other than the Shares settings and Global Share Settings are there to look for? Kind Regards Jens

I also found a red X when i choose template to create a new docker instance. This red X deletes the choosen template...

Hello! I have a couple of docker templates in my list that doesnt work. I want to remove them. How can I do this? I want to remove the "my-binhex-couchpotato" for example. Kind regards Jens

Hello all! I am having trouble with the Unraid 6 to do a clean shit down. Every time I try to du a shutdown/restart it hungs on something. Usually some docker thats not behaving as expected. Thats often an easy fix, to kill the process. But sometimes it gets stuck on the file system sync: Syslog: Sep 21 06:52:40 UNRAID avahi-daemon[8721]: Leaving mDNS multicast group on interface eth0.IPv4 with address 192.168.1.11. Sep 21 06:52:40 UNRAID avahi-daemon[8721]: avahi-daemon 0.6.32 exiting. Sep 21 06:52:40 UNRAID emhttp: shcmd (73834): /etc/rc.d/rc.avahidnsconfd stop |& logger Sep 21 06:52:40 UNRAID root: Stopping Avahi mDNS/DNS-SD DNS Server Configuration Daemon: stopped Sep 21 06:52:40 UNRAID emhttp: Sync filesystems... Sep 21 06:52:40 UNRAID emhttp: shcmd (73835): sync I have waited for an hour now... I cant get the unraid to get past this stage. I tried to stop the array in the gui. I have looked through running processes and no applicatinos seems to be started. Any idea on how to get past this sync stage? Any idea on how to prevent it? Kind regards Jens

After like 20 minutes the array started with an error message that the docker image file was almost full. Maybe that was the case...

I have some problem starting my array after upgrade from 6.19 to 6.2. I got an message: "Mounting disks... Starting service..." And there it is stuck! I have waited for like 10 minutes now...

I got an error message stating: Unmounting Disk 2 ... Clearing Disk 2 ... dd: invalid status flag: ‘progress’ Try 'dd --help' for more information. A message saying "error writing ... no space left" is expected, NOT an error. I guess that the version of DD in the 6.1.9 doesnt support the "status==progress" flag. /Jens

So you are basicly saying that I should follow the instructions for the 6.2 version? /Jens

I am going to remove a drive on my unraid. The drive is now empty. I found the guide on: https://lime-technology.com/wiki/index.php/Shrink_array But for my version 6.1.9 it does tell me to do a removal and then rebuild parity. As I understand, my array isnt protected during this time. For version 6.2.0 (beta?) it is described a method how to keep parity in sync during removal. I found some post guides for doing this on older unraid version. eg: https://lime-technology.com/forum/index.php?topic=6728.0 (see reply #6) Isn't it possible for me to remove a drive and preserve my parity in sync? Kind Regards Jens

Hello As long as I can use the data on the drives, I dont mind doing a fresh install. I will read the wiki and see if I cna figure out how to get the fresh install to work with my drives. Regards Jens

1. Computer boots showing bios alternatives (F2 & F10) 2. Computer shows the following message SYSLINUX 4.03 2010-10-22 EED Copyright © 1994-2010 H. Peter Anvin et al Error: No configuration file found No DEFAULT or UI configuration directive found! boot: Regards Jens

Hello I tried the make_bootable_mac on my MacBook. But got some error messages: cp: /Volumes/UNRAID/syslinux/*: No such file or directory To continue please enter your admin Password: sudo: /tmp/UNRAID/syslinux/make_bootable_mac.sh: command not found Leaving me with even more questions... Why isnt it working? Regards Jens

Hello! OK, will look into the USB then. Sorry for the typo, I wasnt completely aware of the version number of the Unraid. Downloaded the PLG as described above in my modified post. Regards Jens

Hello Today I tried to upgrade from 5.0 final to latest 6.x (downloaded plg plugin fråm http://lime-technology.com/forum/index.php?topic=41061.0) by method #2. Did two reboots of my Unraid and then it gives me an error message: Error: No configuuration file found No DEFAULT or UI configuration directive found! Where should I begin looking? Havent done much troubleshooting on Unraid... Regards Jens