-
Posts
86 -
Joined
Content Type
Profiles
Forums
Downloads
Store
Gallery
Bug Reports
Documentation
Landing
Posts posted by lostwebb
-
-
Brilliant!
Thank you wise one!
Will go and have a look now.
EDIT: I cant seem to find an option for that. I have a x2 port SIL3132 and a 4 port SIL3114. Where would I find the setting? In the SIL 3114 there is no option in the "RAID menu" and the 3132 doesn't have a menu...
-
Hi there!
I have an ASUS P7P55 Mother board with:
CPU: Intel® CoreTM i3 CPU 540 @ 3.07GHz - 3.066 GHz
Cache: 128 kB
Memory: 8 GB - 1333 MHz
and when I went to add a new drive the other day it wouldn't boot. Long and short of it was that when the new drive was connected the flash drive wouldn't show. I removed the new drive and there it was again. As it recognised the USB drive as a HD that and the other 11 hard drives seem to be using up al the "Slots" on the MB.
I didn't know that M/Bs had limits? I was hoping to keep going till I filled the case! Sad times indeed!
Any help appreciated?
Regards,
Steve
-
That looks sweet Raj! Is that under a table? Isn't it a bit noisy?
-
Hey!
Server has been running great for months but then a few days ago it crashed so I rebooted it, and it crashed again. After playing about with it last night, I have disabled ALL the scripts, including the unmenu auto install apart from the UnMenu GUI. And it is still doing it. After rebooting it, its really slow loading the web based interfaces and then after 4-5 minutes it stops responding completely.
Here is my System log. It seems to show that some of the drives have HPA and some SMART are showing errors but I don't know enough about the logs to work out which drives ones.
All help muuuuuch appreshiated.
-
Anyone? Would be great if someone could look over the log and let me know where to start!
-
Hi again!
Am loving my UnRaid for 6 months now, but have come across a few problems just recently. I added three new HD's but in my stupidity i forgot to pre-clear them and is seems that at least two of them had HPA "thingies"
For some reason it has just started a parity check and has found 7 errors.
Running Unraid 4.7
Intel® Core i3 CPU 540 @ 3.07GHz
4GB RAM
2GB SWAP
8 data disks, cache and parity.
Syslog:
All help muchly appreciated!!
;D -
typesdd appears to be another 1.5TB, healthy drive.
How do I find the right folder for the drive?
ls -l /dev/disk/by-id
The disks will be listed by model/serial number with the "device" at the end of each line.
Thanks a lot.
root@tower:~# cat /sys/block/sdf/size 976773168 root@tower:~# dd status=noxfer count=1 if=/dev/sdf | od -Ad -t x1 0000000 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 1+0 records in 1+0 records out * 0000432 00 00 00 00 00 00 00 00 89 af 0b 61 00 00 00 00 0000448 00 00 83 00 00 00 3f 00 00 00 f1 5f 38 3a 00 00 0000464 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 * 0000496 00 00 00 00 00 00 00 00 00 00 00 00 00 00 55 aa 0000512
-
sdd appears to be another 1.5TB, healthy drive.
Right this SHOULD be it. Got the drive id from unMenu.
root@tower:~# cat /sys/block/sdf/size
976773168
root@tower:~# dd status=noxfer count=1 if=/dev/sdf | od -Ad -t x1
0000000 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
1+0 records in
1+0 records out
*
0000432 00 00 00 00 00 00 00 00 89 af 0b 61 00 00 00 00
0000448 00 00 83 00 00 00 3f 00 00 00 f1 5f 38 3a 00 00
0000464 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
*
0000496 00 00 00 00 00 00 00 00 00 00 00 00 00 00 55 aa
0000512
-
As the title really. I have a 7 disk unread setup. And after rebuilding the PC it is set to IDE mode. I have read that AHCI is preferred, should I change it now? Or leave it? and why?
Thanks
-
Sorry, didn't change the drive letter.
I think this is the one...
root@tower:~# cat /sys/block/sdd/size
2930277168
root@tower:~#
root@tower:~# dd status=noxfer count=1 if=/dev/sdd | od -Ad -t x1
0000000 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
1+0 records in
1+0 records out
*
0000448 00 00 83 00 00 00 3f 00 00 00 f1 7a a8 ae 00 00
0000464 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
*
0000496 00 00 00 00 00 00 00 00 00 00 00 00 00 00 55 aa
0000512
-
If you go back to the beginning of this thread, you will find this instruction.
Oh yes
. Here is my information. I hope it helps. -
I have just upgraded too 5b6a from 4.7 final and one of my disks is showing as MBR: unknown. It is a WD 500GB disk that I have been using in Unraid for some time. In fact it is the last 500gb disk I have as I am currently phasing them out.
What I assume has happened is that the disk has been using in windows, as an operating system disk or something. Causing irregular entries to the MBR section. As I did not preclear the drive when I added it (8 months ago) as assume that MBR data is still there causing me problems now.
What would be my next step? Looking forward to getting this running and enabling my addons and what-not again.
Thanks a lot in advance!
-
Thanks alot Joe! Silly me thought I had pressed everything!
-
I might have missed it but where is the GUID in this version?
-
Hi there. Sorry for not giving enough info.
In windows when creating the link to the Thumbnails file from the windows pc to the Unraid share, it creates it but does not work afterwards. Says something about authentication. i assume its loggin in using the share user name and password.
EDIT: Scrap that, its working now...just waiting to see it XBMC uses the new network folder for the images...
-
Thanks for the tutorial!
I have followed all the steps, however using the smlink it does not authenticate on the unraid server. Is there a way around this?
I tried user:passwrod@ but thats as far as my knowlege goes
Thanks
-
Hi there!
So I'm hoping someone can help me, have been having this problem for a while now and am out of ideas...
I have the following folders:
/user/TVShows/1/The Simpsons
Family Guy
and also the folder:
/user/TVShows/The Simpsons
Family Guy
How do I merge the folders inside the subfolders into the main TVShows folder?
I have been trying to use Windows but every time the server stops responding to commands and goes offline. So am looking for a different way of doing it...
Thanks
Appreciate all help.
-
Helpful command!
So, the server stopped responding when I tried to move some files in Windows 7. So I rebooted, telnet'd in ran that command and copied the files again and it stopped after about 3 files, server has stopped responding to on the admin page and telnet
Here is what I captured in Terminal on my mac before the server died:
Thanks so much for the help. Im hoping that we are getting closer to the problem here
-
I am still having the same problem with 4.6. When I create a system log it is only since the computer was booted...so how can I we see what it was doing when it stopped responding? It went down in the middle of the night, I wasn't moving anything. It was just downloading with SABNZBD. I have installed another 2GB of RAM so now it has 4GB.
Latest syslog.
-
Oh dear, sorry for not posting all the spec.
and thank you for the help. Its disk1 not the parity drive that is erroring, so will intconfig still work?
Let me know if you want the full spec still.
Thanks everyone
-
I have found a few forum topics related to this but they seem to be with Gigabyte mobos and parity drives.
Disk1 is now 4 bytes smaller after installing 4.7b1...
-
-
I went down to version 4.6 and booted and it came online fine. After starting to move some files again in Windows7 it has crashed and gone offline.
I will get the syslogs in the morning.
Thank you very much for your help Jo!
-
disk1 WDC_WD5000AAKS-0_WD-WCAS87854397
WDC_WD5000AAKS-0_WD-WCAS87854397 31°C 488,385,492
488,385,496
I have upgraded to 4.7b1 and now its saying that disk 1 is invalid... I haven't touched the disks...
Asus P7P55 12 Hard Drive Limit? Driving me mad!!
in Motherboards and CPUs
Posted
Thank you for the reply! I have disconnected the other one and I still couldn't get a menu. Pressed CTRL+S and F4 but nothing. I have bought another SIL3114 4 port as this was my last slot anyway so can use that instead. But it would still be good to get it working for when I use up those.
Any suggestions as to why the card doesn't say anything about loading a menu?
Thanks!