ChristerB
-
Posts
21 -
Joined
-
Last visited
Content Type
Profiles
Forums
Downloads
Store
Gallery
Bug Reports
Documentation
Landing
Posts posted by ChristerB
-
-
1 hour ago, itimpi said:
You can try but I would expect the drive is likely show up as unmountable when you try The normal way forward is to provide the -L option to the repair - despite the ominous sounding warning it rarely results it any data loss.
Thanks a lot, I will try the .L option on one of the drives.
//ChristerB
-
I have had my unRAID for several years, changed HW and added disks without any issues through the years. Now I ran into issues I never experienced before and would be very grateful for help sorting things out.
So my Lsi card overheated and half of my disks stopped saying there was errors. I turned the array of and shut down the server to let it cool down. After a couple of days I turned it on again and everything seemed fine. I started the array in maintenance mode to run a Check Filesystem Status in the disks.
I started a check -n and got
ALERT: The filesystem has valuable metadata changes in a log which is being ignored because the -n option was used. Expect spurious inconsistencies which may be resolved by first mounting the filesystem to replay the log.So should I stop the array and mount it normally and let the disks read the log and then stop the array and restart in maintenance mode?
Grateful for help figuring out how I should proceed.
//ChristerB
-
So, it seemed to be a heating issue (I had put the fans on low and forgot to put it back on full).
Main problem solved and I will open a new topic on potential disk errors.
-
31 minutes ago, ChatNoir said:
You can check this :
Thanks a lot!
-
2 hours ago, JorgeB said:
One of the LSI HBAs dropped:
Oct 10 22:14:24 Tower kernel: mpt2sas_cm1: sending diag reset !! Oct 10 22:14:24 Tower kernel: mpt2sas_cm1: diag reset: FAILED Oct 10 22:14:26 Tower kernel: iommu: Removing device 0000:03:00.0 from group 19
Check that it's well seated and sufficiently cooled, you can also try a different PICe slot if available.
Thank you @JorgeB, after I cooled down I actually understood what the log file told me.
I will check the card but I haven't touched the server for weeks and it should be well seated and cooled.
Any idea on a good replacement card if it is broken. (I'll read through the recommendations that already exists on this forum)//ChristerB
-
I Noticed that some of the shares was gone and browsed to the GUI and shares. Only cache disk shares are visible and raid shares are gone. I checked the logs and there was a lot of disk errors. My heart stopped beating and I figured I have some major problems.
Do I really have issues with 6 of the disks or what might be the problem here? Could it be one of my SATA controller cards that broke down?If someone could have a look and figure out what my issues are I would be very thankful.
//ChristerB
[Solved) How to proceed after a overheated storage device?
in General Support
Posted
It worked just perfectly. Thanks a lot @itimpi, you made my day 🙂
//ChristerB