Jump to content

sacretagent

Members
 View Profile  See their activity

  • Posts

    943

  • Joined

  • Last visited

 Content Type 

Posts posted by sacretagent

    asrock x570 phantom gaming 4 - amd ryzen 5 2600 can't see sil 3114 cards ?

    in Motherboards and CPUs

    Posted

    Hi,

     

    as my old systemboard went haywire and don't let me boot any more from usb when all 16 drives are attached did i jump to this new setup which is even more frustrating :(

     

    no matter what i try he doesn't want to accept or my adaptec 1220SA or my sil 3114 sata cards....

    he only sees my one asm162 card ...

    i can move that last card to any slot and he will see the disks attached .... the adaptec or the sil cards he doesn't see the disks in any of the slots :(

     

    anybody has some advice?

    thinking of buying a lsi 9211-8i in IT mode but afraid he won't see him too....

     

    might be best to just return the setup?

    any advice on a ryzen board that sees the sil or the adaptec card?

     

    Greetings

    Sacret

    bios settings asus P7955d-e lx

    in Hardware

    Posted · Edited by sacretagent

    ok this server has been running for more then a year with the current configuration but due to some electricity problems (aka a snake that got roasted on a transformator in the village) did this server lose his bios settings and now for the love of god i can't get him to boot from the USB stick.....

    i can if i remove 2 sata controller but then of course i don't have all my disks lol....

    i tried everything i can think off but been busy now for like 15 hours and i can't get him to boot from the usb with all 16 disks installed ....

    bios shows only 12 disks.... and the usb  doesn't show in these 12 disks.... only if i disable 2 onboard controllers or remove 2 sata controller physically it will show me the usb in the list :(

    but when i enable the controllers again or insert the 2 removed ones then next boot the usb is missing again....
     

    it was working and i remember i had similar problem when i set this up but i forgot what the solution was a year ago

    so i was hoping if somebody knows how to solve this.....

     

    here are the bios settings screens

    https://drive.google.com/file/d/1-5MC436EH5eKFiVKVLlNXHPvJCgx3vqi/view?usp=sharing
    https://drive.google.com/file/d/1-FhypBc7UpSqMNXlXiVDBLY9p-hIaxFd/view?usp=sharing
    https://drive.google.com/file/d/1-S6q9zmdyhq-JRslEGJOWE7Z9TVZlQej/view?usp=sharing
    https://drive.google.com/file/d/1YGUg_XfvtjVwFRS7yHFBcH1ZsS0hj4ve/view?usp=sharing
    https://drive.google.com/file/d/1-D8I6_AK6M21WvMSBne3PpZAscMv2YCI/view?usp=sharing
    https://drive.google.com/file/d/1-f-b5SnVEzxSthGvMSn4RkxdFJD1_Qx3/view?usp=sharing
    https://drive.google.com/file/d/1-_iEyaBrbWTfdbDKRwUsbyyQHUYsFBJq/view?usp=sharing
    https://drive.google.com/file/d/1-Jk6TQWQn1I-tPJaySZ-oRO6FmygAl72/view?usp=sharing

     

     

    [Plug-In] Community Applications

    in Plugin Support

    Posted

    squid ,

     

    something wrong with the newest version...

    got that there is a newer version but it doesn't have the same "format" as the other plugins and it fails to upgrade ... where other plugins upgrade fine

     

    it says newest version 2017.04.29b

    i am on 2017.04.09

     

    the title in the plugins page is this

    Quote

    dynamix.plugin.manager.png

    community.applications

    		Andrew Zawadzki 2017.04.09
    2017.04.29b information.png

     

     

    error i get on both servers 

    plugin: updating: community.applications.plg


Cleaning Up Old Versions


plugin: downloading: https://raw.github.com/Squidly271/community.applications/master/archive/community.applications-2017.04.29b.txz ... failed (File I/O error)
plugin: wget: https://raw.github.com/Squidly271/community.applications/master/archive/community.applications-2017.04.29b.txz download failure (File I/O error)

     

    like i said other plugins upgrade fine only this one fails on both servers

    [Plugin] CA Fix Common Problems

    in Plugin Support

    Posted

    well installing the powerdown plugin solves the issue again

     

    array shut down nicely last night

     

    i don't mind troubleshooting but 2 times i tried powerdown without plugin and really "NOTHING" happens

    no umounts not nothing

    it is like typing clear in terminal but at least clear cleans up your terminal

    powerdown did nothing lol

     

     

    [Plugin] CA Fix Common Problems

    in Plugin Support

    Posted

    The /sbin/powerdown will still exist - it will just be the standard Limetech version rather than the one provided by the Powerdown plugin.

     

    server didn't power down last night ;(

     

    from cli

    root@MovieRaid:~# /sbin/powerdown

    -bash: /sbin/powerdown: No such file or directory

     

     

    /usr/local/sbin/powerdown

     

    or just

     

    powerdown

     

    powerdown or /usr/local/sbin/powerdown does NOTHING ....

     

    going to install the package again after i find this restriction and delete the restriction

     

    [Plugin] CA Fix Common Problems

    in Plugin Support

    Posted

    The /sbin/powerdown will still exist - it will just be the standard Limetech version rather than the one provided by the Powerdown plugin.

     

    server didn't power down last night ;(

     

    from cli

    root@MovieRaid:~# /sbin/powerdown

    -bash: /sbin/powerdown: No such file or directory

     

    [Plugin] CA Fix Common Problems

    in Plugin Support

    Posted

    hi guys ,

     

    how do i shutdown my server now if no powerdown is installed ?

    running 6.2

     

    before i had this in my go file

     

    crontab -l > /tmp/file2; echo '#powerdown' >> /tmp/file2; echo '30 0 * * * /sbin/powerdown' >>/tmp/file2; crontab /tmp/file2; rm /tmp/file2

     

    what would i need to call now for a clean shutdown ?

     

    Checksum Suite

    in Plugin Support

    Posted

    HI

    this is the content of the json file

     

    {

        "Parity": true,

        "IgnoreHour": true,

        "Notify": true,

        "Success": true,

        "LogSave": true,

        "NumWatches": "720000",

        "NumQueue": "",

        "Pause": "1800"

    }

     

    as you can see that is correct

    but see attached screenshot .. the values are not correct

     

     

     

    checksum_screenshot.JPG.64d9d01175ddcd82faabecdd92515554.JPG

    Checksum Suite

    in Plugin Support

    Posted

    small bug?

     

    the timeout settings seem not to stick when you change them ...

    i have several time set the timeout on my movie server to 30 minutes ... but every time i open the window to the global settings or checksum tools it always shows 1 minute....

     

    so not sure if the changes stick for that option....

     

     

    [CONTAINER] CrashPlan & CrashPlan-Desktop

    in Docker Containers

    Posted

    i had no issues but it is best to first upgrade crashplan and then crashplan desktop

     

    both have been updated to install 4.4.1 and desktop requires the information from crashplan to be able to connect..

    see extra parameters line from the desktop container "--volumes-from CrashPlan"

     

    i had to delete an orphaned image though after this as due to this parameter the updated could not delete the old image....

    Checksum Suite

    in Plugin Support

    Posted

    ***Sanity check***

    did the first and second release not automatically start the monitoring after a reboot ?

     

    seems with the latest release i need to push the start monitor button myself after a reboot?

     

    Checksum Suite

    in Plugin Support

    Posted

    HI,

     

    I can confirm that checking hash from windows with corz worked ... so no issue with that....

     

    one thing is not really clear yet .....

     

    i have some folders that i had done from corz windows but now i added extra folders to the monitor queue.....

    these folders that don't have hashes yet but that i added to the monitor..... they will get automatically hashes now ?

    or do i first need to add them manually to the queue ?

     

    Checksum Suite

    in Plugin Support

    Posted

    Oct 14 2015 11:47:43 Background Monitor Starting

    Monitoring /mnt/user/Movies

    Setting up watches. Beware: since -r was given, this may take a while!

    Failed to watch /mnt/user/Movies; upper limit on inotify watches reached!

    Please increase the amount of inotify watches allowed per user via `/proc/sys/fs/inotify/max_user_watches'.

     

    i increased it to 728000 and it starts now but it is a bit annoying if we need to set this manually every time ?

    this server powers down at 01 AM and powers automatically back on at 09.30 AM

     

    it also seems to run as root and put the hashes in the files under root ....

    so i don't think we can check hash from windows

     

    [CONTAINER] CrashPlan & CrashPlan-Desktop

    in Docker Containers

    Posted

    seems our upgrading gets stuck again for some reason

     

    new version = 4.41

     

    seems the upgrader gets stuck at 4.33

    https://www.dropbox.com/s/r5vsuy4rl3roxdo/dropbox.JPG?dl=0

     

    sits there now for several hours without installing the 2 newer versions he downloaded

     

    *** UPDATE ***

     

    got everything to run again except the desktop again

     

    just do it the old way by changing the .ui_info

     

    ssh in you server

    docker exec CrashPlan cat /var/lib/crashplan/.ui_info

    you will get something like this 4243,[glow=red,2,300]1a5b6fcc-4c07-44a7-affe-66f8c6342195[/glow],0.0.0.0

    copy paste that middle part (glowing) into the

     

    c:\ProgramData\CrashPlan\.ui_info

     

    it should look like this

     

    4200,1a5b6fcc-4c07-44a7-affe-66f8c6342195,127.0.0.1

     

    Please note 4200 is the port you tunneled with ....

     

    after that follow instruction to tunnel into your server -> http://support.code42.com/CrashPlan/Latest/Configuring/Using_CrashPlan_On_A_Headless_Computer

     

    check your history tab and see what he has done... if he says he installed version 4.3.x or 4.4.0 and is waiting there

    then just do a docker stop and docker start

    he will start with that installed version.... i had to do this twice to get to 4.4.1 and get it running

    after all servers,  computers are on 4.4.1 everything works again.. aka everything backs up again.. but the stupid desktop client i have no clue how to upgrade that one

     

    so i use the old tunnel method till somebody updates that one .... last time it took like 3 weeks for he auto updated

     

    Swap File Plugin for unRAID v5 and v6

    in Plugin Support

    Posted

    Works :)

     

    top - 10:01:53 up 21:32,  1 user,  load average: 2.59, 2.95, 2.99
Tasks: 289 total,   3 running, 286 sleeping,   0 stopped,   0 zombie
Cpu(s): 22.8%us, 44.7%sy,  0.0%ni, 31.8%id,  0.7%wa,  0.0%hi,  0.0%si,  0.0%st
Mem:   8177440k total,  8106480k used,    70960k free,   147872k buffers
Swap:  4194300k total,   311112k used,  3883188k free,  3601232k cached

     

    Thanks Theone

     

     

    Swap File Plugin for unRAID v5 and v6

    in Plugin Support

    Posted

    i felt adventurous today so i uninstalled this plug... upgraded to 6.1.2.. checked everything was fine

    and then installed the plugin again

    everything installed fine

     

    Sep 17 18:12:18 P8H67 emhttp: cmd: /usr/local/emhttp/plugins/dynamix.plugin.manager/scripts/plugin install https://raw.githubusercontent.com/theone11/swapfile_plugin/master/swapfile.plg (Other emhttp)

    Sep 17 18:12:20 P8H67 logger: plugin: creating: /tmp/swapfile-install - from INLINE content

    Sep 17 18:12:20 P8H67 logger: plugin: running: /tmp/swapfile-install

     

    gui comes up

    but starting the plugin is a no go

     

    Sep 17 18:12:56 P8H67 emhttp: run_cmd: invalid cmd: /etc/rc.d/rc.swapfile start (Other emhttp)

     

    so if you could look into this :)

     

     

    updated the unraid version to right version

×
×
  • Create New...