sacretagent

Hi, as my old systemboard went haywire and don't let me boot any more from usb when all 16 drives are attached did i jump to this new setup which is even more frustrating no matter what i try he doesn't want to accept or my adaptec 1220SA or my sil 3114 sata cards.... he only sees my one asm162 card ... i can move that last card to any slot and he will see the disks attached .... the adaptec or the sil cards he doesn't see the disks in any of the slots anybody has some advice? thinking of buying a lsi 9211-8i in IT mode but afraid he won't see him too.... might be best to just return the setup? any advice on a ryzen board that sees the sil or the adaptec card? Greetings Sacret

ok this server has been running for more then a year with the current configuration but due to some electricity problems (aka a snake that got roasted on a transformator in the village) did this server lose his bios settings and now for the love of god i can't get him to boot from the USB stick..... i can if i remove 2 sata controller but then of course i don't have all my disks lol.... i tried everything i can think off but been busy now for like 15 hours and i can't get him to boot from the usb with all 16 disks installed .... bios shows only 12 disks.... and the usb doesn't show in these 12 disks.... only if i disable 2 onboard controllers or remove 2 sata controller physically it will show me the usb in the list but when i enable the controllers again or insert the 2 removed ones then next boot the usb is missing again.... it was working and i remember i had similar problem when i set this up but i forgot what the solution was a year ago so i was hoping if somebody knows how to solve this..... here are the bios settings screens https://drive.google.com/file/d/1-5MC436EH5eKFiVKVLlNXHPvJCgx3vqi/view?usp=sharing https://drive.google.com/file/d/1-FhypBc7UpSqMNXlXiVDBLY9p-hIaxFd/view?usp=sharing https://drive.google.com/file/d/1-S6q9zmdyhq-JRslEGJOWE7Z9TVZlQej/view?usp=sharing https://drive.google.com/file/d/1YGUg_XfvtjVwFRS7yHFBcH1ZsS0hj4ve/view?usp=sharing https://drive.google.com/file/d/1-D8I6_AK6M21WvMSBne3PpZAscMv2YCI/view?usp=sharing https://drive.google.com/file/d/1-f-b5SnVEzxSthGvMSn4RkxdFJD1_Qx3/view?usp=sharing https://drive.google.com/file/d/1-_iEyaBrbWTfdbDKRwUsbyyQHUYsFBJq/view?usp=sharing https://drive.google.com/file/d/1-Jk6TQWQn1I-tPJaySZ-oRO6FmygAl72/view?usp=sharing

mm restarted docker service and now it works ,.... weird

last update from today won't start up .. get an error 403 or so

newest rutorrent upgrade has changed parameters... rtorrent will not start... .. can you please advise on the new parameters... old ones are peer_exchange and use_udp_trackers.... had to # them before rtorrent would start....

as that requires your unraid gui to respond... with unmenu the logs were refreshed every 2 minutes and even when your server hung most of the time you were able to see on the unmenu screen what happened ... anyway we will have to adjust as always.... but the spacing on this new gui is to wide can we get an option to make it like before ?

Seems this update is the death of unmenu ? ;( upgraded one server .... had a lot of issues with your port 443 and one of my dockers ... which i managed to change by changing the dockers IP but unmenu is a mess now .... guess i will have to learn to live without it ... any way we can add like the last 20 lines of the system log optionally to the dashboard .... i understand that not everybody would want that .... but the main reason why i kept unmenu going was because of the logs... when i had an issue with the unraid gui i always had unmenu nicely pointing out where the issue could be..... Also lost some of my custom images for some dockers or can i put them in a different folder ? tended to use the unmenu folder for those 555 Is the go file still being parsed as i still have a few others in there #give nobody shell access usermod -s /bin/bash nobody #usermod -G mysql mysql #create sshd lastlog touch /var/log/lastlog #content cp /boot/custom/content/contentcatalog /etc/cron.weekly/ chmod +x /etc/cron.weekly/contentcatalog #crontab crontab -l > /tmp/file1; echo '#Start movie server' >> /tmp/file1; echo '01 08 * * * wakeonlan 48:5B:39:F5:DB:0B' >>/tmp/file1; crontab /tmp/file1; rm /tmp/file1

weird Turned out to be a disk causing this ? i removed the disk 10 which i added last and hey parity rebuild succeeded overnight .... not sure what could be the problem... disk is OK according smart.... will try to change cable between disk and sil controller .... any other bright ideas to further troubleshoot this? power should be ok this enclosure ran 13 disks for years...

r2d2-diagnostics-20170625-1024.zipHi, Got same lockup issue.... once a little bit load on the server it locks up... can't run parity check ....as then it locks up... same with plex scan .... not sure when it started i know 15th it ran a complete parity check without finding errors.... last boot now i disabled automount of my smb share of the other server if people check the logs .... only way to get to the GUI after a "unclean shutdown" is to remove a disk so it won't start {so any errors about disk 10 not being there is because i removed it before boot} attached diagnosis report... will run memtest now for a few hours...

squid , something wrong with the newest version... got that there is a newer version but it doesn't have the same "format" as the other plugins and it fails to upgrade ... where other plugins upgrade fine it says newest version 2017.04.29b i am on 2017.04.09 the title in the plugins page is this error i get on both servers plugin: updating: community.applications.plg Cleaning Up Old Versions plugin: downloading: https://raw.github.com/Squidly271/community.applications/master/archive/community.applications-2017.04.29b.txz ... failed (File I/O error) plugin: wget: https://raw.github.com/Squidly271/community.applications/master/archive/community.applications-2017.04.29b.txz download failure (File I/O error) like i said other plugins upgrade fine only this one fails on both servers

HI Johnnie, that seems to do the trick... one drive is nearly finished now... the other one has some bad blocks which i am mapping now and then will rerun rebuild-tree does limetech know about this? Greetings

HAHAHa it is in the title as asked for in the subforum description 6.3.2 quote -> Please prefix your post with the specific version of unRAID OS in use.

HI , got a reiserfs drive that became unformatted in my tv server did a reiserfsck --check on the disk and it told me that it could be solved with --rebuild-tree but at 15% this stops with a segmentation error..... so did all the obvious things as memory checks and so on but it won't finish the rebuild root@R2D2:~# reiserfsck --rebuild-tree /dev/sdg1 reiserfsck 3.6.25 ************************************************************* ** Do not run the program with --rebuild-tree unless ** ** something is broken and MAKE A BACKUP before using it. ** ** If you have bad sectors on a drive it is usually a bad ** ** idea to continue using it. Then you probably should get ** ** a working hard drive, copy the file system from the bad ** ** drive to the good one -- dd_rescue is a good tool for ** ** that -- and only then run this program. ** ************************************************************* Will rebuild the filesystem (/dev/sdg1) tree Will put log info to 'stdout' Do you want to run this program?[N/Yes] (note need to type Yes if you do):Yes Replaying journal: Done. Reiserfs journal '/dev/sdg1' in blocks [18..8211]: 0 transactions replayed ########### reiserfsck --rebuild-tree started at Thu Mar 9 20:41:59 2017 ########### Pass 0: ####### Pass 0 ####### Loading on-disk bitmap .. ok, 241399810 blocks marked used Skipping 15663 blocks (super block, journal, bitmaps) 241384147 blocks will be read 0%...Segmentation fault left 207493688, 22914 /sec root@R2D2:~# so now i am stuck with a root block error root@R2D2:~# reiserfsck --check /dev/sdg1 reiserfsck 3.6.25 Will read-only check consistency of the filesystem on /dev/sdg1 Will put log info to 'stdout' Do you want to run this program?[N/Yes] (note need to type Yes if you do):Yes ########### reiserfsck --check started at Thu Mar 9 20:38:22 2017 ########### Replaying journal: Done. Reiserfs journal '/dev/sdg1' in blocks [18..8211]: 0 transactions replayed Checking internal tree.. Bad root block 0. (--rebuild-tree did not complete) Aborted root@R2D2:~# is there a way around this? I tried moving the drive to my movieraid server but it hangs at the same point .... so it is disk specific i guess... would like to get to solve the root block error so that i can mount it readable and get the data from it .... is there a way to do so ? i know the data is still there as i did a test with easus data recovery and it finds everything ,,,,, but there has to be a way around this bad root block thing.... it is reiserfsck that sets it when you do a --rebuild-tree so surely it should be solvable? got another disk on my movieraid server which refused to delete some files so again ran check it tells me to run rebuild-tree anf again segmentation fault but this time at nearly the end of the check so now i have 2 disks which are having the root block issue .... this is crazy ... is there a known issue with the current reiserfsck program on our unraids?

well installing the powerdown plugin solves the issue again array shut down nicely last night i don't mind troubleshooting but 2 times i tried powerdown without plugin and really "NOTHING" happens no umounts not nothing it is like typing clear in terminal but at least clear cleans up your terminal powerdown did nothing lol

server didn't power down last night ;( from cli /usr/local/sbin/powerdown or just powerdown powerdown or /usr/local/sbin/powerdown does NOTHING .... going to install the package again after i find this restriction and delete the restriction

server didn't power down last night ;( from cli

hi guys , how do i shutdown my server now if no powerdown is installed ? running 6.2 before i had this in my go file what would i need to call now for a clean shutdown ?

back to 6.2 next problem Warning: syntax error, unexpected $end, expecting TC_DOLLAR_CURLY or TC_QUOTED_STRING or '"' in state/disks.ini on line 233 in /usr/local/emhttp/plugins/dynamix/include/DeviceList.php on line 19 Warning: array_merge_recursive(): Argument #1 is not an array in /usr/local/emhttp/plugins/dynamix/include/CustomMerge.php on line 17 Warning: Invalid argument supplied for foreach() in /usr/local/emhttp/plugins/dynamix/include/DeviceList.php on line 298 guess i wil do a new install

Can you post the content of the file /var/local/emhttp/sec_afp.ini Send BY PM went back to 6.1.9 but have no more access to my shares considering to do a fresh install now not sure what to think ....

again a lot of issues with the GUI Warning: syntax error, unexpected $end, expecting TC_DOLLAR_CURLY or TC_QUOTED_STRING or '"' in state/sec_afp.ini on line 302 in /usr/local/emhttp/plugins/dynamix/template.php on line 40 NONE of my disks have illegal characters NOR have my shares anything special i get this while i was deleting unused dockers seems it somehow loses the name of my UNRAID usb This is in the logs Sep 16 14:43:34 P8H67 emhttp: nothing to sync Sep 16 14:43:34 P8H67 rc.swapfile[17419]: Checking for swap file plugin update during array mount ... Sep 16 14:43:34 P8H67 emhttp: Checking for swap file plugin update during array mount ... Sep 16 14:43:37 P8H67 rc.swapfile[24827]: Local plugin is the same version as on hosting server (v2015.09.21) Sep 16 14:43:37 P8H67 emhttp: Local plugin is the same version as on hosting server (v2015.09.21) Sep 16 14:43:37 P8H67 rc.swapfile[24829]: Starting swap file during array mount ... Sep 16 14:43:37 P8H67 emhttp: Starting swap file during array mount ... Sep 16 14:43:37 P8H67 rc.swapfile[24833]: Creating swap file /mnt/swap/swapfile please wait ... Sep 16 14:43:37 P8H67 emhttp: Creating swap file /mnt/swap/swapfile please wait ... Sep 16 14:43:38 P8H67 emhttp: Setting up swapspace version 1, size = 1.5 GiB (1643597824 bytes) Sep 16 14:43:38 P8H67 emhttp: LABEL=UNRAID-SWAP, UUID=c3269de5-952e-4f2e-8e24-efbff9d11c88 Sep 16 14:43:38 P8H67 emhttp: swapon /mnt/swap/swapfile Sep 16 14:43:38 P8H67 rc.swapfile[25719]: Swap file /mnt/swap/swapfile created and started Sep 16 14:43:38 P8H67 emhttp: Swap file /mnt/swap/swapfile created and started Sep 16 14:44:10 P8H67 emhttp: cmd: /usr/local/emhttp/plugins/dynamix.plugin.manager/scripts/plugin_rm /boot/config/plugins-error/powerdown-x86_64.plg Sep 16 14:45:01 P8H67 crond[1514]: exit status 2 from user root /usr/local/emhttp/plugins/dynamix.system.stats/scripts/sa1 1 1 &> /dev/null Sep 16 14:46:02 P8H67 crond[1514]: exit status 2 from user root /usr/local/emhttp/plugins/dynamix.system.stats/scripts/sa1 1 1 &> /dev/null

I am on 6.1.9.. that's why i posted it here.... don't have time to update my sig every time we upgrade LOL don't see the need to post diagnostics ... errors are clearly gui errors... annd yes i just updated to last release this morning Dynamix webGui The Dynamix webGui is the latest iteration of the unRAID Server OS System Management Utility. Built upon Simple Features, it provides real-time screen updates, tabbed viewing and many more enhancements. Bergware 2016.07.27 up-to-date

from time to time i get these errors in the gui when i stop the array and after a disk check for example, start the array again Warning: syntax error, unexpected $end, expecting TC_DOLLAR_CURLY or TC_QUOTED_STRING or '"' in state/sec.ini on line 266 in /usr/local/emhttp/plugins/dynamix/template.php on line 34 Warning: syntax error, unexpected $end, expecting TC_DOLLAR_CURLY or TC_QUOTED_STRING or '"' in state/sec_afp.ini on line 302 in /usr/local/emhttp/plugins/dynamix/template.php on line 40 when this happens i only have the header on the page ... nothing else

solved it by copying the tar file and the plg file from my other server and rebooting... there should be a check in place for a 0mb file no? or a md5 check ?

so this morning i decided to upgrade my webgui but bad luck wants it that the github servers are down this morning so i dlded a 0mb dynamix-2016.01.22.tar.gz which the system extracted and now i have no gui any more ... only get 404 not found.... github servers are still down so can't download the new gui... any quick way around this ? restore old gui ? what i need to do to get it restored ? or when the servers come back online?

Finally a Pic of JonP ?