Kampfwurst

on the first Page I found the package "LSI MegaRAID to SAS2008(P11)". But there is also a P14 in the Internet. I Would like to flash the newest version on my M1015. Which Version is the newest?

Hello I got today my M1015. I tried to flash the IR Firmware. Everything worked fine during the Flash. I was flashing like this: megarec -writesbr 0 sbrempty.bin megarec -cleanflash 0 <reboot, back to USB stick> sas2flsh -o -f 2118ir.bin -b mptsas2.rom sas2flsh -o -sasadd 500605b0xxxxxxxx (x= numbers for SAS address) <reboot> After the last reboot the PC stopped working. It shows MPT SAS2Bios Press CTRL-C for the LSI Utility. after this i get a flashing cursor in the left corner. I cannot boot anymore from the usb stick. What was going wrong? MPT2BIOS-7.29.00.00 PCI Slot 5 VENDOR NAME: LSI Produkt Identifier: SAS2008-IR Produkt Version 15.00.00.00 Size NVDATA 0F:00:00:06

the problem is that Im a student and flashing schould work to 100%;-) 70$ is a lot of money for me Is it possible to run a Raid 5 on that Controller? I would like to run it under ESXi 5.1

Hello At the moment I have a 9690SA-8i. But this controller is quite old ;-) So i have one Question. Is it possible to "unlock/flash" a Fujitsu D2607-A21 GS 1 Raid Controller?. I found out that it should be a SAS MEGARAID LSI 2008 Controller?. I can get the DS2607-A21 for about 70$. The D2607-A21 only supports at the moment Raid 0 and Raid 1. http://www.fujitsu-ersatzteile.de/it-pi-n-SAS_MEGARAID_LSI_2008_S26361_D2607_A21_1_R791_-pId-276033200201408036.html Christopher