alexstein

Still no change unfortunately. Looks like the card may have a fault i think. Thanks for the assist.

Let me try. One sec

How do i load these drivers into unraid? Not a linux person here

so looks like VID is 1924 / 101404cc which isnt on the driver list on your command.

Here is the card. Nothing too obvious on the card from what i can see

Here is my output: root@NAS:~# modinfo sfc filename: /lib/modules/5.10.28-Unraid/kernel/drivers/net/ethernet/sfc/sfc.ko.xz license: GPL description: Solarflare network driver author: Solarflare Communications and Michael Brown <[email protected]> alias: pci:v00001924d00001B03sv*sd*bc*sc*i* alias: pci:v00001924d00000B03sv*sd*bc*sc*i* alias: pci:v00001924d00001A03sv*sd*bc*sc*i* alias: pci:v00001924d00000A03sv*sd*bc*sc*i* alias: pci:v00001924d00001923sv*sd*bc*sc*i* alias: pci:v00001924d00000923sv*sd*bc*sc*i* alias: pci:v00001924d00001903sv*sd*bc*sc*i* alias: pci:v00001924d00000903sv*sd*bc*sc*i* alias: pci:v00001924d00000813sv*sd*bc*sc*i* alias: pci:v00001924d00000803sv*sd*bc*sc*i* alias: pci:v000010EEd00001100sv*sd*bc*sc*i* alias: pci:v000010EEd00000100sv*sd*bc*sc*i* depends: mdio retpoline: Y intree: Y name: sfc vermagic: 5.10.28-Unraid SMP mod_unload parm: vf_max_tx_channels:Limit the number of TX channels VFs can use (uint) parm: max_vfs:Reduce the number of VFs initialized by the driver (int) parm: mcdi_logging_default:Enable MCDI logging on newly-probed functions (bool) parm: rx_refill_threshold:RX descriptor ring refill threshold (%) (uint) parm: irq_adapt_low_thresh:Threshold score for reducing IRQ moderation (uint) parm: irq_adapt_high_thresh:Threshold score for increasing IRQ moderation (uint) parm: interrupt_mode:Interrupt mode (0=>MSIX 1=>MSI 2=>legacy) (uint) parm: rss_cpus:Number of CPUs to use for Receive-Side Scaling (uint) parm: efx_separate_tx_channels:Use separate channels for TX and RX (bool) parm: phy_flash_cfg:Set PHYs into reflash mode initially (bool) parm: debug:Bitmapped debugging message enable value (uint) I am just going to check the Vendor ID's on the card vs what is in the driver support listing. back in 5

Hi Simon, Do i literally run the command you gave?

I only have a windows machine available and based on what i can find the NIC is only compatible with Linux. https://lenovopress.com/tips1156-solarflare-sfn7122f Surely if there is no driver then there is no way to load the nic into the OS so that it is visible?

Hi Jorge. Do we know if the NIC is supported / has driver support? Slot wise ive tried it in another port with no luck. Ill have to dig out another machine shortly and see how it goes.

Evening all, Ive been having some issues on my current rig (x99 xeon / 2008sas (with hp expander) + gtx1650Super. I was previously running a Mellenox connectx-2 10gb nic and was maxing out my cache drive upload at around 600MB/s (evo970 Pro) to try and resolve this I took advice from another Unraid user on Facebook who suggested getting a Solaflare sfn7122f which apparently works fine on Unraid. I am running the latest build I have today taken delivery of the card however i am finding that the hardware is lighting up however Unraid is not listing the NIC to be configurable. The card is in a x16 slot and can be seen without issue by my 10gb switch Any thoughts or assistance would be highly appreciated. nas-diagnostics-20210830-2122.zip