umax
-
Posts
55 -
Joined
-
Last visited
Content Type
Profiles
Forums
Downloads
Store
Gallery
Bug Reports
Documentation
Landing
Posts posted by umax
-
-
Here they are, thanks
-
Hi, I have successfully converted my two new ssd into raid0 btrfs, folowed the step to move appdata onto array and than back to cache pool, but now my dockers are acting up. I only use three of them, deluge, krusader and roon.
Deluge refuses to connect to WebUi, krusader is giving me some vnc error and my roon clients are unable to reach roonserver. What should I do?
-
Thanks! Can I use Btrfs file system on new cache drive and just follow the above steps?
-
My cache drive only has 2GB left since I use it to store Roon library on it. Beside that I use it for 4 docker's and thats it, no mover, etc..
What is the right way to migrate everything from existing ssd to a new one? Is there a line code to clone everything?
I have attached diagnostic file from my server, maybe someone can check if there is something else on the cache drive or/if something could be optimised (docker image allocation size)?
Thanks in advance!
-
19 hours ago, dkerlee said:
@umax there are good resources here:https://community.roonlabs.com/c/support/port-forwarding-resources/104
and here:
https://portforward.com/how-to-port-forward/
If you run into additional problems, post over at the community roonlabs forum and they can help you out. Or maybe I'll help you out over there!
Thank you, got it through by opening ports as per your edit on 1st page! My favourite docker on unraid! Roon rules, now on the go!
- 2
-
50 minutes ago, JDGJr said:
Can anyone comment on their success upgrading to Roon 2.0?
It went smooth on my side, updated as usual, I just need to figure out the port forwarding now for the ARC in order to ba able to stream music from outside
-
On 12/5/2020 at 2:49 PM, CS01-HS said:
One of the recommended SMB tweaks is disabling signing. Have you done that? It may require a reboot to take effect:
$ more /etc/nsmb.conf [default] signing_required=no
Is that tweak done on the Unraid or Osx via terminal?
-
To not open new thread, will AOC-SASLP-MV8 (not ver. "2") work with Seagate X18 18TB drives? I have 16 x 10TB connected to two of this controllers without issue. Is there anything different regarding drives past 10TB mark?
-
I am struggling to understand how to import from server function works. Whatever path I try to use, lychee is saying; Given path is not a directory (/mnt/user/Pictures)
Also, where does lynchee creates folder for pictures (/uploads)?
This is my lychee log;
2017-09-02 23:41:27 - error - Lychee\Modules\Database::createTables (180) - Table 'lychee.lychee_settings' doesn't exist 2017-09-02 23:41:27 - error - Lychee\Modules\Database::createTables (225) - Table 'lychee.lychee_albums' doesn't exist 2017-09-02 23:41:27 - error - Lychee\Modules\Database::createTables (248) - Table 'lychee.lychee_photos' doesn't exist 2017-09-02 23:42:57 - error - Lychee\Modules\Import::server (106) - Given path is not a directory (/nmt/users/PiCTURES/TEST) 2017-09-02 23:45:22 - error - Lychee\Modules\Import::server (106) - Given path is not a directory (/nmt/users/PiCTURES/TEST) 2017-09-02 23:59:16 - error - Lychee\Modules\Import::server (106) - Given path is not a directory (/mnt/users/PiCTURES/TEST) 2017-09-03 00:00:56 - error - Lychee\Modules\Import::server (106) - Given path is not a directory (/mnt/users/PiCTURES/Thumbs) 2017-09-03 00:01:32 - error - Lychee\Modules\Import::server (106) - Given path is not a directory (/PiCTURES/TEST) 2017-09-03 00:13:43 - notice - Lychee\Modules\Session::login (81) - User (umax) has logged in from 192.168.1.7 2017-09-03 00:14:30 - error - Lychee\Modules\Import::server (106) - Given path is not a directory (/mnt/users/PiCTURES) 2017-09-03 00:15:25 - error - Lychee\Modules\Import::server (106) - Given path is not a directory (/nmt/users/PiCTURES) 2017-09-03 00:21:50 - notice - Lychee\Modules\Session::login (81) - User (umax) has logged in from 192.168.1.7 2017-09-03 00:23:17 - error - Lychee\Modules\Import::server (106) - Given path is not a directory (/mnt/user/Pictures) 2017-09-03 00:26:42 - notice - Lychee\Modules\Session::login (81) - User (umax) has logged in from 192.168.1.15 2017-09-03 00:39:43 - notice - Lychee\Modules\Session::login (81) - User (umax) has logged in from 192.168.1.7 2017-09-03 00:40:58 - error - Lychee\Modules\Import::url (56) - Photo format not supported (/mnt/user/PiCTURES/) 2017-09-03 00:41:24 - error - Lychee\Modules\Import::server (106) - Given path is not a directory (/mnt/user/PiCTURES) 2017-09-03 00:41:50 - error - Lychee\Modules\Import::server (106) - Given path is not a directory (/mnt/user/PiCTURES/boatTrip13-zaGledat) 2017-09-03 00:46:31 - notice - Lychee\Modules\Session::login (81) - User (umax) has logged in from 192.168.1.7 2017-09-03 00:46:53 - error - Lychee\Modules\Import::server (106) - Given path is not a directory (/mnt/user0/PiCTURES) 2017-09-03 00:48:42 - error - Lychee\Modules\Import::server (106) - Given path is not a directory (/mnt/disk7/PiCTURES) 2017-09-03 00:49:17 - error - Lychee\Modules\Import::server (106) - Given path is not a directory (/disk7/PiCTURES) 2017-09-03 00:49:33 - error - Lychee\Modules\Import::server (106) - Given path is not a directory (/PiCTURES)
-
That one of the disk (disk3 in my case) has 3x times less reads than all of the others in parity build operation?
-
Something is wrong with disk 10 (md10) ... put in my precleared spare disk, started rebuild but log is throwing out same errors. What to do? Should I stop the rebuild?
-
After upgrading to 6.1.7 all my shares are missing. The files on disk share are intact. When I try to recreate the user share I got message "Share X has been deleted.".
In syslog there is just this;
Fatal error: Allowed memory size of 134217728 bytes exhausted (tried to allocate 32 bytes) in /usr/local/emhttp/plugins/dynamix/include/DefaultPageLayout.php(279) : eval()'d code on line 73
-
You need to enable "System Notifications", see Settings -> Notification Settings.
If it is already enabled, then disable/apply and enable/apply.
That was it! Kudos & respect for your work
Btw, is there a tuneable option for faster real-time refreshing?
-
can anyone confirm my situation? i try different browsers and systems, so it must be something on the server side.
-
Need some help.
New 6.1.4 version installed. Under "Settings", "Display Settings" "Page update frequency", it doesn't matter what I set up - the Pages are always static except System Stats which is working in real time. Any other settings to change for real-time to work?
-
Need some help. Can you please let me know how can I mount a Mac OS Extended (Journaled) drive? I am trying to copy some large amount of data over to server that is on a mac formatted drive.
-
That did it, thank you, great plug!
-
Having problem with installing this plugin. When I install via "Install Plugin" it looks like it is installed, but there is no icon under System Information group (I have just "Active Streams" from Dynamix there).
When I try via telnet I get "plugin: run failed: /bin/bash retval: 1"
Any clue what is going on? I have just upgraded to 6.1.3 (from 5.0.6)
root@UNRAiD:~# wget https://github.com/dlandon/open.files/raw/master/open.files.plg --2015-11-07 23:00:18-- https://github.com/dlandon/open.files/raw/master/open.files.plg Resolving github.com (github.com)... 192.30.252.129 Connecting to github.com (github.com)|192.30.252.129|:443... connected. HTTP request sent, awaiting response... 302 Found Location: https://raw.githubusercontent.com/dlandon/open.files/master/open.files.plg [following] --2015-11-07 23:00:19-- https://raw.githubusercontent.com/dlandon/open.files/master/open.files.plg Resolving raw.githubusercontent.com (raw.githubusercontent.com)... 185.31.17.133 Connecting to raw.githubusercontent.com (raw.githubusercontent.com)|185.31.17.133|:443... connected. HTTP request sent, awaiting response... 200 OK Length: 3063 (3.0K) [text/plain] Saving to: ‘open.files.plg.1’ open.files.plg.1 100%[=====================>] 2.99K --.-KB/s in 0s 2015-11-07 23:00:19 (241 MB/s) - ‘open.files.plg.1’ saved [3063/3063] root@UNRAiD:~# installplg open.files.plg plugin: installing: open.files.plg plugin: run failed: /bin/bash retval: 1
-
It's the communication between unraid and wd live.. it's the only thing that makes sense..
Considering a flash card with same file, plays without a flaw on the wd live box
Considering, I have been using my qnap box for the past 40 days without a hitch streamin to the wd live box.. which is hooked up to the same switch as the unraid box
Ahh, now thats different. My NMT was freezing while streaming from UNRAID and PC, so I knew something was fishy with it. Thats strange indeed, as I am running 5.0.6 with spin-down delay of 15min and everything is working flawlessly.
-
I would bet it is your WD live box. I had exactly the same issue with my PCH-C200. Random freezes with movies. Tried everything network-unraid related, then I plugged in my old PCH-A110 and everything was working again. So now I've sold my C200 and bought a A410. I guess the network card on C200 gave away, as I have completely restored it with FW and the issue was still there.
-
I have one 2TB failed, have precleared the 4TB drive. At the same time I want to remove another 2TB drive which has pending sectors. What is the best way to accomplish that? Thanks!
-
Been awhile since I have last pre-cleard a drive. Do I still need to use -A option on unRaid 5.0.6 with 4TB drives (HGST Deskstar NAS)?
-
Yeah, this is a known bug. It has been corrected for v6, but needs to be ported to v5 as well.
Thanks! Not a biggie, but good to know so I stop messing with it Anyway, congrats to all the work you have done
-
There is an issue with the CPU and MB temperatures. This line in the SystemTemps.php sorts the temperatures and the lowest one always shows first (left position) on the webpage.
exec("sensors -A|awk '/^CPU Temp/ {print $3*1}; /^M\/?B Temp/ {print $3*1}'",$temp);
No matter which temperature is associated with the CPU and MB, the lowest temperature will always show first on the left. In my case the MB temp is lower so it shows in the CPU temperature position.
Really a minor issue, but may cause some consternation when trying to get the temperatures to show in the correct positions.
I have the same problem, no matter how I label temps in sensors_conf, I always get the MB temp is Processor window and vice-versa. Tho my lowest temperature (CPU) is on the right side (see bellow)
Recommended controllers for Unraid
in Storage Devices and Controllers
Posted
I need to finally swap out marvel based sas cards. I am using Supermicro X8SIA-F board with PCIe 2.0 slots. On ebay, the cheapest cards are newer PCIe 3.0, specifically 9207-8i can be bought for 20€, while 9211-8i are 30€. Since the difference is minimal, I am leaning more towards 9207 in case I upgrade the MB in the future, but if for any reason 9211 are better performing in native 2.0 slots I would go with that. Any thoughts?