HKR
-
Posts
164 -
Joined
-
Last visited
Content Type
Profiles
Forums
Downloads
Store
Gallery
Bug Reports
Documentation
Landing
Posts posted by HKR
-
-
Log is attached. copying data wont work..
-
Dint seem to work. Could you help me with exact commands pls?
-
attached is the output of running : xfs_repair -v /dev/md5 in a putty session.
or am i running a wrong command? Sorry not very good with these things so pls advice.
-
Attached is log for the test on disk5. Pls advice do i need to repair the file system on the disk?
-
-
Hello,
I have an array of about 8 Disks, off which Disk 1 is disabled and needs replacing. While i will get to doing so in a few days, i just noticed i am unable to write any data to the array. It starts copying files but then slowly slows down and completely stops... Is this normal ? Previously with a disabled disk i am able to use the server just fine.
any advice?
Thanks
-
Hello,
I have one of my HDD disabled and when i try to start the array i just cant seem to get it enabled. It shows a red cross mark against that HDD. However that HDD passes all Smart tests. Is there anyway i can re-enable the HDD or what is my next course of action?
Thanks
-
Someone please advice, this issue is still present and i am unable to stop the array.
-
I've attached the log, please take a look and advice.
-
Since the past couple of days i have been facing this wierd issue where when i try to stop the array, it keep re-trying to un-mount shares and it goes on and on! It wont stop the array for hours and ultimately through ssh i have to manually initiate a shutdown/reboot. Since this reboots the system i am unable to get a log for this either...
Any clues as to what could be wrong?
-
Hello,
i am unable to delete or move files created by the rutorrent docker, i mean the torrents i downloaded using rutorrent.
I keep getting a Unix file permission error, those files can only be copy-pasted. And only deleted using the rutorrent interface or manually via ssh.
Is there some file permission i could update to fix this? I am sure this is not the problem with the download dir as the deluge docker which i use, uses the same folder and those file can be moved just fine.
-
I have attached 2 screenshots, please take a look.
Under server setting no matter what Interface i select i cannot connect to the server.
-
I understand that, i can connect to the webui just fine, i did not play around with any setting in the webui, i tried switching the network adapter setting in the 'server settings' however the connectivity test fails no matter what network host i select and i cannot connect to the server via VPN.
-
Can i rule this out to be a port forwarding issue? As when i am in the same wifi network i can connect via VPN on my iPhone just fine, but when i switch off the wifi and try to connect it wont connect...
-
Thank you, i figured that out however i am trying all the various network interfaces under 'server setting' but on all of them the 'connectivity test' fails. I have done port forwarding on my router. So i dont know what could be wrong.
-
I managed to get it, however i cannot find where to get the openvpn files for the user that i added? I mean the profile config files so i can use them on another machine to login via VPN.
-
After installing this docker i cannot get the webui to load in bridge or host mode. i get a page cannot load in my browser.. please advice.
-
Hello,
Is there a FTP/HTTP file downloader plugin/Docker available for unraid? Something like i enter a HTTP/FTP URL and it grabs the file from there for me...
Thanks
-
Is there no way to move up/down the torrent that are in the queue?
-
I just noticed in the 'Dashboard' under the SMART status of 4 Disk it all shows a "Command Timeout:1 " error. What could this because off?
-
Ok, thanks a lot. From the screenshot of the disk errors i had attached in 2 post above can you understand the nature of the error? Is it a bad sector ?
A bit off-topic, i am one of those members who are facing the slow parity check issues with the SAS2LP controllers. I read somewhere on the forums about a plugin called tuntables, would this really help me as well?
-
*Update*
I just bought a new Disk to replace the old damaged one, should i just plug it in the slot of the old one and let the data re-built?
Once again to my question in the old post, will the complete data re-built even if a parity check was not run after moving new data onto the array?
-
I have about half the data backed-up from the damaged disk. Since you mentioend parity check cannot be run on a damaged disk, does that mean that the data which i had copied recently (around 1.5TB) on that disk is un-safe? Because a parity check was not run since i copied the data.
Also, will the data get re-built after inserting the new disk or no?
-
I connected the Disk in question to my PC and ran a couple of HDD test app's and they all showed the HDD as failed. I have attached the screenshots for the same.
I guess i have to RMA the drive now.
My question now is, currently i have stopped the array and shutdown the server. However when i connect this disk to my PC, it gets detected and shows up under the 'Disk management' app but no actual partition/data content is shown for that disk under 'My Computer' so it leaves me with no way to currently backup the data on this drive (just as a safe side, i know unRaid would re-built the data when the new disk is installed) Is there any way i can still backup the data?
- If i want to continue using the unRaid server while i wait for the replacment disk to arrive, can i continue doing so or will it cause any data loss?
- If a parity check is run without this Disk installed will it cause any data loss?
- Should i just select 'No disk" and start the array?
Screenshots:
http://i67.tinypic.com/2j4ofu0.png
http://i67.tinypic.com/6y08qr.png
Thanks
Disk Disabled, Cannot write data?
in General Support
Posted
Sorry about that, pls check log attached now.
tower-diagnostics-20191127-1920.zip