mkeil77

Could you please share the docker settings for Sonar, Sabnzbd and deluge from your docker tab in unpaid Please ensure that all mappings are visible HI mkeil77 https://drive.google.com/file/d/0BwVQ1QEehpJJSW81aWdQTFlxQlk/view?usp=drivesdk https://drive.google.com/file/d/0BwVQ1QEehpJJTmNWNkJ1M2tsRDQ/view?usp=drivesdk https://drive.google.com/file/d/0BwVQ1QEehpJJTGU2cFpzVkZJN0E/view?usp=drivesdk I hope that what you meant I noticed you have 2 path configured in your SABNZBD, what I can't see in any of your screenshots is the corresponding container path. could you please send me a screenshot of both PATH configs of your SABNZBD. just click on edit and send me a screenshot of it.

Could you please share the docker settings for Sonar, Sabnzbd and deluge from your docker tab in unpaid Please ensure that all mappings are visible

Please make a issue on github. And I'll look into it tomorrow. Thanks! Issue posted along with this comment: it might make sense to have NZBGet / SABnzbd support this rather than each PVR application. Ultimately I'm looking for a way to automate the remux process to help out my processor and limit transcoding requirements for Plex. Where that lives, I'm not sure I care too much (personally). hi, I was wondering if this was ever integrated in one or the other way? right now I'm trying to find a docker for it, but till now without much success. since I have not seen anything since my post I decided to look into it myself and came up with the attached script which is installing all dependencies for mp4_automator. currently I'm using it with a local build docker file based on need's sonar dockerfile. also it still require the manual download of the scripts itself. I'm sure the specialists here could fine tune the script. anyhow just in case someone is interested in integrate it to the docker. installmp4.zip

Hi CHBMB I meant that the problem with my settings in sonarr because config sonarr in docker containers is not same as windows That the problem i meant And as i said i did make sure to setup sonarr in the right way and did work the problem with copy to move the files What you think that i forget or miss ? Sonarr is easier than headphones to setup and sonarr cant get it right its sad Headphones sent the torrent to deluge and dont move the file of copy it ! So if there a guide it will a lot easier In docker /downloads means /what you set in docker container setup But that dont work always Whilst people will help with setup issues if we're given enough information to help, we currently have no plans to produce a guide. We don't have the time or manpower to do so, it's difficult to draw a line sometimes but we will support the implementation of docker to an application, but don't provide support for the app. Also as you haven't provided any information at all about how you currently have things setup it's impossible to tell you what you're doing wrong. I have said this before but if people can't be bothered to post more than "it doesn't work" then the result is the volunteers who are trying to help have a lot more work to do to help solve the problem and sniper I've helped you for a long time the other night and in other threads and pointed this out to you a few times. Want help? Help us to help you! hi Sniper, the only thing I can think of is that your torrent client is still seeding the file. but without some more info as mentioned by CHBMB its difficult to say where the problem is. maybe a look at the Sonarr log could help as well. in regards to Sonarr itself I can only say it's working as it should, have it running for quite some time now, with transmission and usenet.

ok thanks. will try it later today.

OK, than I have a different problem, because if i'm trying to update any of the Linuxserver.io dockers which I have installed I'm getting this error. I just tried to update any other docker and it went trough without the error. any advice what that could be?

I actually have right now the same issue but with unRaid 6.2.0-rc1. If I understand you right you removed your docker image and re-created/added all your docker's (containers) again which solved the problem. May I ask if you had this issue with all docker's or "only with the one from Linuxserver.io?

Hi, I'm trying to build my fist docker, however I'm ending up with the beloww error if I run the docker build. layers from manifest don't match image configuration could someone point me in the right direction? thanks Matt

Please make a issue on github. And I'll look into it tomorrow. Thanks! Issue posted along with this comment: it might make sense to have NZBGet / SABnzbd support this rather than each PVR application. Ultimately I'm looking for a way to automate the remux process to help out my processor and limit transcoding requirements for Plex. Where that lives, I'm not sure I care too much (personally). hi, I was wondering if this was ever integrated in one or the other way? right now I'm trying to find a docker for it, but till now without much success.

having some issues with plexrequests. already tried to remove/re-add the docker but now it cant install meteor. log is saying to check that I'm online, which I am. is anyone facing the same issue?

I checked all. I was copying in MC as usually and in this case directly to /mnt/cache/appdate what I noticed was before I started to copy the 50GB I had about 230GB free. after copying 10GB I got the first error message that the disk would be full. also in the unraid log I saw errors that some dockers could not start because of no disk space. when I then checked on the console the disk was full, strange. I backup all data again and format the cache disk with XFS. restoring at the moment all the date.

hih, I have a very strange issue. i'm trying to copy about 50GB to my appdata folder on the cache drive, a 512 GB SSD, using MC. however I'm getting the error that I have not enough space left. if i'm checking the GUI its showing me about 230GB free space.http://lime-technology.com/forum/Smileys/default/rolleyes.gif I checked and also from the CL its showing that I have enough space. Filesystem 1K-blocks Used Available Use% Mounted on /dev/sde1 500107576 236276652 263785668 48% /mnt/cache i'm running on version 6.2.0-beta23 is this a bug or am I doing something wrong?

hi, I just restrted my plexrequests docker to get it updated to the latest version but as per the unraid log its hanging for hours to update meteor. I already restarted the docker again but still, since 2 hours its hanging at the task to update meteor. anyone an idea what that could be?

It started with the last parity check where I had a couple of read errors from disk 1. Never had that bevor. What I did is I changed the SATA port on the MB (asRock C2750). Then I started a new parity check, during the same disk 2 and 4 had massive read errors about 32000. I tried to stop the array and the result was both disks got missing and even disk 1. I then connected disk 2 back to the original SATA port and restarted the system. All disks came back. Only disk 2 was in an emulated mode.

Yes it had. Right now I'm rebuilding it on the same HD, not sure if that's a good idea but I have right now no other HD around.

something really strange is going on. i restarted the system twice and now i had "only" one disk showing as emulated. I'm getting a bit worried. any suggestions for the next steps? tower-diagnostics-20160402-1448.zip

hi, i'm running the latest beta with one parity drive. After the last parity check i had some read errors on one of my disk. Since i could not figure out what the problem was i checked the SATA cables and after that i run again an parity check. during this parity check i got more read error on other disk ending up that 3 of my 5 disk are now missing is all the data lost? please help

Hi, i just tried to do those changes and facing now some issues after i amended the syslinux.cfg. My unRAID was not reachable after the reboot at all over the network until i removed the changes again. my both NICs have the same vendor ID. the mainboard which i'm using its the ASRock - C2750D4I Matt