BurlyOaf

Hi All, Did anyone get any further with this? I am having no luck at all, Should there be an xml template for it maybe? It seems the interfaces aren't being assigned in the VM. Also, do i need 2 physical interfaces for this, or can 2 virtuals be created on virbr0 ? Thanks

You are a gentleman, thankyou hopefully it works

bumping an old thread, i am having a go at getting this running as i can't seem to find a docker to do it unfortunately but in the instructions at step 8, 8. Download and copy the following file into the root of your cache drive (/mnt/cache) Customizable PXE Server Menu <--- Download Link the file is no longer there, would anyone have this file on hand and be able to host it somewhere for me to grab please? Cheers,

All appears to be working now! thanks so much!

any luck guys?

I am having a similar drama with Sonarr and Mover. mover is scheduled, but doesn't seem to run and has resulted in my cache drive running out of space. i have tried quite a few times, invoking mover, letting it finish, then altering the TV share to not use cache. the next day there is TV present on the cache again, and i have to re-enable cache on the share to get mover to get them from there, then disable mover again. Sonarr is set for /config /mnt/cache/appdata/nzbdrone2/ /mnt/ /mnt/

I had a friend at work try it on his server aswell with the same result ;/

I have tried re-installing a few more times, and still it all looks fine, but no response from server or webui, the tail of my logs looks just like most other peoples, and it just sits there, has anyone had any luck or able to shed any light? my folders are /mnt/disk11/apps/musicbrainz3/data and /mnt/disk11/apps/musicbrainz3/config the folder has been incrementing as i try re-installing

Hi all, i think i am having dramas getting this going, should the webui take hours to become available? The download and building of database *seems* fine. but starting of the server / webui i don't seem to be having any luck with

Hi All, I had an ageing WD RED 3TB that had failed and i replaced it with another WD RED 3TB, everything had been fine, until last night the drive got some read errors after a parity check and a few hours later was disabled. I am chasing advice on what my next move should be, reboot and re-add the drive? Pre clear it again see results then re-add the drive, other suggestions / ideas. I checked and made sure all cables were nicely seated when i put the new drive in but i can check this again. Unfortunately the drive that previously failed has been RMA'd, i was told they would straight swap but wan't the case when i arrived, so i don't currently have a hot spare. My array is 11 3TB drives, one of which is Parity, and an SSD for cache. Last disk in the array is currently disabled. Diagnostics are attached, any help would be greatly appreciated Cheers, ironman-diagnostics-20160419-1141.zip

Hi Guys, Not sure if any of you will be able to help me, i can't get my head around observium, do i install it as bridge or host? if i go bridge i can access observium but can't add any devices, and if i go host it has a cry about sql, i believe because i am already running mysql on port 3306 Ideas? Cheers,

Hi All, Just an update, not really sure what has (hopefully) fixed this, But since doing the BIOS upgrade i had ~2 days stable at work, and have taken it home and had it running for just over 3 days so far, all seems to be running nicely, vm and heaps of dockers running without a drama Happy Days! Cheers

I have just had a look at the console screen, it has the output below. cp: cannot stat '/boot/config/*.conf' : no such file or directory i had a look at some other threads, and typing 'diagnostics' gives the same output, but does create the diagnostics file in /boot/logs My flash is an Imation Nano Pro 8GB, i have seen some suggestions of reformatting and putting unraid back onto the flash. Is that a likely solution?

Thanks for looking Rob, I have left it running since the BIOS upgrade and memory reseat seems fine so far. uptime ~22 hours so far. below is what is in /boot/packages , the only one that i have installed is screen. I had previously thought that UnMENU was the culprit and had not run it, but the crashing happened still. root@IronMan:/boot/packages# ls airvideo-unmenu-package.conf* mover_fix-logging-unmenu-package.conf* apcupsd-3.14.10-unmenu-package-x86_64.conf* mysql-unmenu-package.conf* apcupsd-3.14.10-unmenu-package.conf* ntfs-3g-2010.3.6-unmenu-package.conf* apcupsd-unmenu-package.conf* openssh-unmenu-package.conf* apcupsd3-unmenu-package.conf* openssl-unmenu-package.conf* bwm-ng-unmenu-package-x86_64.conf* p910nd-unmenu-package.conf* bwm-ng-unmenu-package.conf* pbzip2-unmenu-package.conf* compiler-unmenu-package.conf* pciutils-unmenu-package.conf* compiler-unmenu-package_x86_64.conf* perl-unmenu-package.conf* cpio-unmenu-package.conf* php-unmenu-package.conf* cpufrequtils-unmenu-package.conf* powerdown-2.06_ctlaltdel-unmenu-package.conf* cxxlibs-unmenu-package.conf* powerdown-overtemp-unmenu-package.conf* dmidecode-unmenu-package.conf* powerdown_ctlaltdel-unmenu-package.conf* ds_store_cleanup-unmenu-package.conf* proftp-unmenu-package.conf* dynamic-dns-unmenu-package.conf* python-unmenu-package.conf* encfs-unmenu-package.conf* python_cheetah-unmenu-package.conf* file-unmenu-package.conf* reiserfsck-3.6.21-unmenu-package.conf* hdparm-9.27-unmenu-package.conf* rsync-unmenu-package.conf* hdparm-9.37-unmenu-package-1.conf* ruby-unmenu-package.conf* htop-unmenu-package.conf* sabnzbd-unmenu-package.conf* iftop-unmenu-package.conf* screen-4.0.3-x86_64-4.txz* image_server-unmenu-package.conf* screen-4.0.3-x86_64-4.txz.auto_install* inotify-tools-unmenu-package.conf* screen-4.0.3-x86_64-4.txz.manual_install* iperf-unmenu-package.conf* screen-unmenu-package-x86_64.conf* istat-unmenu-package.conf* screen-unmenu-package.conf* jre-unmenu-package.conf* shellinabox-unmenu-package.conf* lighttpd-unmenu-package.conf* smartctl-unmenu-package.conf* lsof-unmenu-package.conf* socat-unmenu-package.conf* mail-ssmtp-unmenu-package-x86_64.conf* sqlite-unmenu-package.conf* mail-ssmtp-unmenu-package.conf* svn-unmenu-package.conf* mail_status-unmenu-package.conf* unraid-web-unmenu-package.conf* md5deep-unmenu-package.conf* unrar-unmenu-package.conf* monthly-parity-unmenu-package.conf* utempter-1.1.5-x86_64-1.txz* mover_conditional_sync-unmenu-package.conf* vim-unmenu-package.conf* mover_exclude_underscore-unmenu-package.conf* zip-unmenu-package.conf* root@IronMan:/boot/packages# 14/07/2015 9:46:23 PM or 9:57PM (trying to suss whether the time in the alert is host system time or gmail's time) but a few minutes either side of the crash it became unresponsive to pings, and it's mac address is unlearnt from my switch. The diagnostic capture was after a reboot, in safe mode. The last crash there was some output i didn't manage to get a photo of, but usually it looks as it does straight from boot, but the cursor stops flashing. The syslog tail was via a screen output to a file. Temperatures all seem hunky dory. ironman-diagnostics-20150716-0803.zip

also I am not sure if this helps or not, but i tailed syslog and dmesg to files yesterday (attached) to see if anything happened before it crashed again (it did) Since then, i have upgraded my bios to version 2103, and reseated ram. Any input would be greatly appreciated, cheers. Syslog output Jul 14 07:58:54 IronMan dnsmasq-dhcp[2423]: read /var/lib/libvirt/dnsmasq/default.hostsfile Jul 14 07:58:54 IronMan kernel: virbr0: port 1(virbr0-nic) entered disabled state Jul 14 07:58:55 IronMan avahi-daemon[2062]: Service "IronMan" (/services/sftp-ssh.service) successfully established. Jul 14 07:58:55 IronMan avahi-daemon[2062]: Service "IronMan" (/services/smb.service) successfully established. Jul 14 07:58:55 IronMan avahi-daemon[2062]: Service "IronMan" (/services/ssh.service) successfully established. Jul 14 07:58:55 IronMan ntpd[1540]: Listen normally on 3 docker0 172.17.42.1:123 Jul 14 07:58:55 IronMan ntpd[1540]: Listen normally on 4 virbr0 192.168.122.1:123 Jul 14 07:58:55 IronMan ntpd[1540]: new interface(s) found: waking up resolver Jul 14 09:21:49 IronMan in.telnetd[13158]: connect from 192.168.1.254 (192.168.1.254) Jul 14 09:21:55 IronMan login[13159]: ROOT LOGIN on '/dev/pts/0' from '192.168.1.254' ironman-dmesg.txt

Hi Guys, i booted into safe mode last night and left it overnight, attached are the diagnositc outputs. Hope this helps Cheers ironman-diagnostics-20150714-2205.zip

can do, is it possible to kick off a reboot into safe mode remotely? I am not in front of the box at the moment unfortunately

Hi trurl, thanks for your response, diagnostics attached. I have setup a ping monitor to notify my when it goes down,it stopped responding at 4:36am this morning, and came back up at 7:58am, and had rebooted. I am not sure if it has been left this long while hung before, possibly while i was out over the weekend, but otherwise as soon as i notice it i go and have a look. Which usually results in a hard reset as the terminal is unresponsive to inputs and nothing changes if the power button is pressed and left to shutdown. I will screen and tail syslog, and dmesg to files, is there anything else you suggest i output to file? Cheers ironman-diagnostics-20150714-0912.zip

not to hijack the thread, but curious.. I have a QNAP TS-412, and when the free space got below a certain level, the SMB process would shoot cpu usage right up and make the NAS almost useless, does this happen with unRAID aswell?

Hi All, Upon glowing recommendation from a mate at work, I am trying to migrate to unRAID from an N36L with an mdadm array, QNAP TS-412 and another box (performing all the services below) with 6 3TB drives, but I am facing some issues. The killer so far is random crashing. So far there is very little this box is doing as I am trying to set it up and prove that it can take over the duties of my existing boxes. Required to run are Sickbeard / Sonarr SABnzbd Logitech Media Server TVHeadend (with HDHomerun tuners, any direction with getting these tuners running would be awesome, can't seem to find anything more than the drivers are included but not sure where to go from) Couchpotato Headphones mysql kodi headless I would also like to run some VM's on this once all is setup and i am comfortable Everything seems to be going fine Sonarr, Couch and Sab all talk and behave the way they should. But then everything stops, no response from console, usb keyboard does not respond to caps lock being touched. In the beginning when it was crashing it would take out my network, maybe it goes nuts broadcasting not sure, as soon as i unplug network or power everything restores. This seems to have stopped, but it still crashes around 20-30 hours. I thought maybe it was when mover was being run, but i have run mover from command and all works nicely. Setup is a 3TB WD Green WD30EURS (Parity), 3TB WD Red WD30EFRX, and a 256GB Fujitsu SSD (Cache) M/B ASUSTek Gryphon Z87 CPU i7-4770K HVM Enabled IOMMU Disbaled RAM 32GB Network Onboard Gig Kernel Linux 4.0.4-unRAID x86_64 Are there any more details or output i can provide (of course there are my knowledge is limited but learn quickly, and enough to build the boxes above, I just don't always know where to look for the outputs i need for diagnosis / troubleshooting). Any help would be greatly appreciated! Cheers