tservice

System is up and running normally now. Thank you for all your help.

Thank you very much. I will try that, and report back the result.

It will not let me. Under tools, I selected update, plugin update check comes up, and it just hangs there. Is there a work around to upgrade? Also I have tried selecting next under branch, 6.6 is listed, I tell it to update, the install plugin comes up and hangs there also.

Main tab, Array operations. Just says starting. Also under docker, says array must be started to view docker containers.

Thank you, here is the diagnostics. tower-diagnostics-20180922-1136.zip

I'm running 6.4, I can not get the array to start. Can someone direct me on how to diagnosis what's wrong?

Thanks BIll, that one looks promising.

Thanks bud. I will keep looking.

I am currently only using 4 of 6 sata ports.I would prefer not to have any less than that,8 would be nice for future drive expansion, Asus or any other brand would be fine with me. I have looked up the ASUS F2A85-V PR0, all I can find is used ones. I assume you prefer Asus, is there a newer model that is compariable to the one you have stated? And which cpu should I be looking at?

Thanks for the reply Bill, Virtualization is enabled. Any other thoughts?

I purchased a XFX Radeon RX 480, but only to discover that my current rig doesn't support vt-d. So time to upgrade. I am not a hardware guy, so I need some suggestions from ya'll. I would like a few more sata ports than what I have also. I want to reuse the ram if possible, and keep costs down as much as possible. Thanks. Current setup. unRAID system:unRAID server Plus, version 6.3.2 Model:Custom Motherboard:Gigabyte Technology Co., Ltd. - GA-78LMT-USB3 Processor:AMD FX™-6100 Six-Core @ 3.3 GHz HVM:Enabled IOMMU:Disabled Cache:Internal Cache = 128 kB (max. capacity 128 kB) External Cache = 2048 kB (max. capacity 2048 kB) Memory:32 GB (max. installable capacity 32 GB)* Bank0/1 = 8192 MB, 1333 MHz Bank2/3 = 8192 MB, 1333 MHz Bank4/5 = 8192 MB, 1333 MHz Bank6/7 = 8192 MB, 1333 MHz Network:eth0: 1000Mb/s, full duplex, mtu 1500

Well now I feel foolish.. I never pointed to that. It's working now, thanks

http://lime-technology.com/wiki/index.php/UnRAID_Manual_6#Creating_Your_Windows_VM

I have a windows 7 vm, in the device manager, it shows the network card drivers not installed. It is unable to find the drivers. How do I resolve this problem? Thanks

Thank you very much.

humm I never thought about that. How do I go about doing that?

Thanks buddy. I'll search google some more. I'll check for bios updates as well.

I have had several vms. Ubuntu, centos, mint. I have never had this problem. Maybe this screen shot will add some insight?? lol idk where I came up with pitchfork.... antergos.pdf

Here you go, thanks for any help. <domain type='kvm'> <name>QownNotes</name> <uuid>95816541-a527-d93e-48a5-eb2743bcb67b</uuid> <description>Qnotes / Owncloud</description> <metadata> <vmtemplate name="Custom" icon="arch.png" os="arch"/> </metadata> <memory unit='KiB'>4194304</memory> <currentMemory unit='KiB'>4194304</currentMemory> <memoryBacking> <nosharepages/> <locked/> </memoryBacking> <vcpu placement='static'>2</vcpu> <cputune> <vcpupin vcpu='0' cpuset='0'/> <vcpupin vcpu='1' cpuset='1'/> </cputune> <os> <type arch='x86_64' machine='pc-q35-2.3'>hvm</type> </os> <features> <acpi/> <apic/> </features> <cpu mode='host-passthrough'> <topology sockets='1' cores='2' threads='1'/> </cpu> <clock offset='utc'> <timer name='rtc' tickpolicy='catchup'/> <timer name='pit' tickpolicy='delay'/> <timer name='hpet' present='no'/> </clock> <on_poweroff>destroy</on_poweroff> <on_reboot>restart</on_reboot> <on_crash>restart</on_crash> <devices> <emulator>/usr/bin/qemu-system-x86_64</emulator> <disk type='file' device='disk'> <driver name='qemu' type='raw' cache='writeback'/> <source file='/mnt/disk1/QownNotes/QownNotes/vdisk1.img'/> <target dev='hdb' bus='virtio'/> <boot order='1'/> <address type='pci' domain='0x0000' bus='0x02' slot='0x04' function='0x0'/> </disk> <disk type='file' device='cdrom'> <driver name='qemu' type='raw'/> <source file='mnt/disk1/ISOs/antergos-2016.07.19-x86_64.iso'/> <target dev='hda' bus='sata'/> <readonly/> <boot order='2'/> <address type='drive' controller='0' bus='0' target='0' unit='0'/> </disk> <controller type='usb' index='0' model='ich9-ehci1'> <address type='pci' domain='0x0000' bus='0x02' slot='0x02' function='0x7'/> </controller> <controller type='usb' index='0' model='ich9-uhci1'> <master startport='0'/> <address type='pci' domain='0x0000' bus='0x02' slot='0x02' function='0x0' multifunction='on'/> </controller> <controller type='sata' index='0'> <address type='pci' domain='0x0000' bus='0x00' slot='0x1f' function='0x2'/> </controller> <controller type='pci' index='0' model='pcie-root'/> <controller type='pci' index='1' model='dmi-to-pci-bridge'> <address type='pci' domain='0x0000' bus='0x00' slot='0x1e' function='0x0'/> </controller> <controller type='pci' index='2' model='pci-bridge'> <address type='pci' domain='0x0000' bus='0x01' slot='0x01' function='0x0'/> </controller> <controller type='virtio-serial' index='0'> <address type='pci' domain='0x0000' bus='0x02' slot='0x03' function='0x0'/> </controller> <interface type='bridge'> <mac address='52:54:00:be:9a:9c'/> <source bridge='br0'/> <model type='virtio'/> <address type='pci' domain='0x0000' bus='0x02' slot='0x01' function='0x0'/> </interface> <serial type='pty'> <target port='0'/> </serial> <console type='pty'> <target type='serial' port='0'/> </console> <channel type='unix'> <source mode='bind' path='/var/lib/libvirt/qemu/channel/target/QownNotes.org.qemu.guest_agent.0'/> <target type='virtio' name='org.qemu.guest_agent.0'/> <address type='virtio-serial' controller='0' bus='0' port='1'/> </channel> <input type='tablet' bus='usb'/> <input type='mouse' bus='ps2'/> <input type='keyboard' bus='ps2'/> <graphics type='vnc' port='-1' autoport='yes' websocket='-1' listen='0.0.0.0' keymap='en-us'> <listen type='address' address='0.0.0.0'/> </graphics> <video> <model type='vmvga' vram='16384' heads='1'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x01' function='0x0'/> </video> <memballoon model='virtio'> <address type='pci' domain='0x0000' bus='0x02' slot='0x05' function='0x0'/> </memballoon> </devices> </domain> Model: Custom M/B: Gigabyte Technology Co., Ltd. - GA-78LMT-USB3 CPU: AMD FX-6100 Six-Core @ 3300 HVM: Enabled IOMMU: Disabled Cache: 128 kB, 2048 kB Memory: 32768 MB (max. installable capacity 32 GB)* Network: eth0: 1000Mb/s - Full Duplex Kernel: Linux 4.1.18-unRAID x86_64

Anyone here that can help with installing antergos vm on my unraid server? It boots to the iso, however I'm getting a hardware hos no pitchfork error. After that Antergos just stops.

I was giving a buddy access to my ftp server. I had his account completely setup once before. He said at that time he didn't need it anymore, so I deleted his user account. Now he does have a need to use it. So I set him up once again using the same user name, and the Proftpd would give him a error saying incorrect login. I deleted his user account, and made a new one, with a user name never used before on my system. And it works perfectly now. What I assume is happening, is that even though, I have deleted a user, and need to add that user again (using same the user name) Unraid must be getting confused and denies access. I don't think that when you delete a user Unraid never actually completely deletes said user, this causes conflicts when adding that user name again. How would I go about troubleshooting this issue? I am almost certain it is a Unraid problem and not a Proftd problem, since Proftd uses Unraid user acounts, for user management (which I don't like). Unraid version 6.1.9 Proftpd version 2016.06.06.1

After upgrading my network, owncloud keeps tell me "You are accessing the server from an untrusted domain. Please contact your administrator. If you are an administrator of this instance, configure the "trusted_domain" setting in config/config.php. An example configuration is provided in config/config.sample.php. Depending on your configuration, as an administrator you might also be able to use the button below to trust this domain." When I select add as trusted, page changes reflecting the old ip address. How do I change the ip address to reflect the new address?