Jump to content

pepper

Members
  • Posts

    37
  • Joined

  • Last visited

Posts posted by pepper

  1. root@Tower:/mnt/user/appdata/delugevpn# docker exec binhex-delugevpn ifconfig

    eth0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500

            inet 172.17.0.25  netmask 255.255.0.0  broadcast 0.0.0.0

            ether 02:42:ac:11:00:19  txqueuelen 0  (Ethernet)

            RX packets 59957  bytes 68392503 (65.2 MiB)

            RX errors 0  dropped 0  overruns 0  frame 0

            TX packets 23744  bytes 6303156 (6.0 MiB)

            TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

     

    lo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536

            inet 127.0.0.1  netmask 255.0.0.0

            loop  txqueuelen 0  (Local Loopback)

            RX packets 8871  bytes 2438002 (2.3 MiB)

            RX errors 0  dropped 0  overruns 0  frame 0

            TX packets 8871  bytes 2438002 (2.3 MiB)

            TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

     

    tun0: flags=4305<UP,POINTOPOINT,RUNNING,NOARP,MULTICAST>  mtu 1500

            inet 10.8.1.94  netmask 255.255.255.255  destination 10.8.1.93

            unspec 00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00  txqueuelen 100  (UNSPEC)

            RX packets 362  bytes 23953 (23.3 KiB)

            RX errors 0  dropped 0  overruns 0  frame 0

            TX packets 1590  bytes 205040 (200.2 KiB)

            TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

     

  2. Thanks for the quick reply.  I hope the attached picture is worth a thousand words (shows a peer), but just in case...

     

    from ubuntu-15.10-desktop-amd64.iso

     

    Downloaded: 0.0 KiB (0.0 KiB)

    Uploaded: 0.0 KiB (0.0 KiB)

    Share Ratio: ?

    Next Announce: 2m 45s

    Tracker Status: ubuntu.com: Error:

     

    I had been trying the checkMyTorrentIp.png as suggested in the FAQ and also test-utorrent.txt.

    delugevpn2.png.0dd7ebe5dae5ce6cb8fcc2f511d62541.png

  3. If it helps my computer specs are a Z800 with a GT 720 as the main and a Radeon 6670 for the passthrough.

     

    Model: Custom

    M/B: Hewlett-Packard - 0AECh

    CPU: Intel® Xeon® CPU E5620 @ 2.40GHz

    HVM: Enabled

    IOMMU: Enabled

    Cache: 256 kB, 1024 kB, 12288 kB

    Memory: 49152 MB (max. installable capacity 96 GB)

    Network: eth0: 100Mb/s - Full Duplex

    Kernel: Linux 4.1.15-unRAID x86_64

    OpenSSL: 1.0.1q

  4. looks like you suggested. am attaching the conf file also.

     

    tmpfs on /var/log type tmpfs (rw,size=128m,mode=0755)

    proc on /proc type proc (rw)

    sysfs on /sys type sysfs (rw)

    /dev/sdc1 on /boot type vfat (rw,noatime,nodiratime,umask=0,shortname=mixed)

    /dev/md1 on /mnt/disk1 type xfs (rw,noatime,nodiratime)

    shfs on /mnt/user type fuse.shfs (rw,nosuid,nodev,noatime,allow_other)

    /boot/config/plugins/dynamix.kvm.manager/domain.img on /etc/libvirt type ext4 (rw)

    qemu.conf

    mount.txt

  5. yes I tried the ACS override as well as moving to a new slot (attached lspci info) 

     

    internal error: early end of file from monitor: possible problem:

    2016-01-17T17:21:07.921012Z qemu-system-x86_64: -device vfio-pci,host=0f:00.0,bus=root.1,addr=00.0,multifunction=on,x-vga=on: vfio: failed to set iommu for container: Operation not permitted

    2016-01-17T17:21:07.921043Z qemu-system-x86_64: -device vfio-pci,host=0f:00.0,bus=root.1,addr=00.0,multifunction=on,x-vga=on: vfio: failed to setup container for group 15

    2016-01-17T17:21:07.921052Z qemu-system-x86_64: -device vfio-pci,host=0f:00.0,bus=root.1,addr=00.0,multifunction=on,x-vga=on: vfio: failed to get group 15

    2016-01-17T17:21:07.921064Z qemu-system-x86_64: -device vfio-pci,host=0f:00.0,bus=root.1,addr=00.0,multifunction=on,x-vga=on: Device initialization failed

    2016-01-17T17:21:07.921076Z qemu-system-x86_64: -device vfio-pci,host=0f:00.0,bus=root.1,addr=00.0,multifunction=on,x-vga=on: Device 'vfio-pci' could not be initialized

     

     

    also tried the nvidia card which is now device 42: same failure

    new.pci.txt

  6. Thank you for your quick reply.  I have done a little poking around and hoping you can see something in the attached lspci output.  I did see a bios setting that allows me to change the primary video card slot (the radeon is currently in slot 5 and the primary is slot 2), could a controller be blocking it? Please share any ideas you have.

    pciInfo.txt

    Tower_SysDevs.html.txt

×
×
  • Create New...