mister.bizuth

OK. Data rebuild is ongoing. Pretty simple

So i plugged in the new PSU and the server started fine. no more buzzing sounds. Disk 2 is still disabled. The reads, writes and errors counts on the Main page now show 0 each which was not the case before. I attached a screenshot and the new logs. What would you recommend i do next? tower-diagnostics-20230104-1848.zip

Thanks JorgeB. I rechecked all cables including PSU and drives (unplugged, cleaned with a soft brush, re-plugged). This time, none of the disks of the array were discovered at startup! See picture and diagnostics files. The PSU does make a significant buzzing sound and the server itself makes buzzing sounds that cycle repeatedly every 1-2 seconds. So i rebooted the server again. this second time it did not come online at all (web interface not available)... i think i will order a new PSU and check again. David tower-diagnostics-20230102-1513.zip

Hello and happy new year! i had to restart my server after a power failure at my home (the UPS did not seem to do its job but that another subject). Then i realized i had to manually start the array which typically starts automatically. When i did, i noticed one of my 2 data disks was disabled and the read check was paused at 0.0%. it sill is ~24 hours later. i am not sure what to do. After reading a few thread here, i tried to start an Extented SMART test on the disabled disk but i does not seem to start... i attached the diagnostics files. Does a disabled disk mean i have to replace it or can it be repaired? Thanks for your guidance. David tower-diagnostics-20230102-1259.zip