Korath

Members
  • Posts

    21
  • Joined

  • Last visited

Everything posted by Korath

  1. For others reading the thread working link is: @Binhex that worked great, thank you for quick reply and all the work you do!
  2. Looks like hes on his phone and the links didn't copy/paste
  3. Same issue here, just logged onto Radaar and noticed an error with Deluge, went to open the webGUI and getting site cannot be reached. Change VPNenabled to NO and it works fine. My PIA is working fine, nothing has changed on my end, SABvpn is still working.
  4. Hey, So my Media share is set not to use Cache drive: however, if I look at the folder in the Shares tab it's listed as using Cache... but then if I go into Anime Movies nothing is?! any ideas?
  5. Looks like that massive amount of writes is also part of the issue, it goes back to normal numbers after a reboot. I'm starting to think the USB drive is dying. It's only £5 for a new one so will get one ordered and swap the key over.
  6. It's a SanDisk Cruzer_Fit - 16 GB Maybe the device is dying. I mean it is a few years old now (and according to Unraid has 18,446,744,073,709,551,616 writes?!)
  7. Plugged into Windows and did the requested repair, tried it a couple of times to make sure Windows was happy with it but still having the same issue back on the server Also plugged into a different (USB2) port.
  8. Hey everyone, So if I reboot my server everything is fine but then after a few minutes, I get this Docker error and then the docker tab disappears from the top (but everything running in Docker is still working fine). Also, notifications are enabled, you even still get them popping up behind the warning. So something isn't right. Any idea how I fix? Oh and this started happening when I was running 6.5.0, I updated hoping it would go away but no luck! :P
  9. Not sure if its the best way of doing it but I added /tv and /movies and tested it working! woo Question is now how do I remove the downloads that are currently sitting in my docker.img?
  10. Yes I do actually. So whats the best way to have it set? Is it just a case of creating a /tv and /movie mapping to the correct location? (I would of though that becuase they are subdirs in /downloads they would of auto created without issue?)
  11. Forgive me I'm new to unRaid / Docker but this has gotten me so confused... I had SABnzb all setup, it was downloading, unpacking and then moving my files and they were just disappearing off the face of my disk. I was confused and thought maybe I messed up my Sonarr/CP settings and it was getting deleted somewhere along the way... Then boom, docker won't start, image full. Don't have any idea how to get into the img and clear it out so I deleted it and started again, double checking my settings and still couldn't figure it out... so thought I would try NZBget instead. Exactly the same issue?! What I don't understand is that its using all the same folders, I can see the files in the inter dir and when it finishes its just meant to be moving to dst in the parent dir but somewhere along the line it moving it into the docker image. What am I doing wrong? (and how can I delete the stuff thats already in the img?)
  12. recreated the container and turned off SSL and seems to of fixed it
  13. Hmm actually its not just a SABnzb issue, looks like my containers can't talk to each other even by IP? Plex Requests can't see Sonarr or CouchPotato.... hmmmm.
  14. Yep, gave the full access API, it seems to be unhappy with the hostname - just wondering if its because its running through a VPN?
  15. New to unRaid (about 30min ago!) but have my array setup, dockers for Sonarr, Plex, CP and SabNZBvpn running. Got Sab running fine, can access it via hostname:8080 but I can't get Sonarr to see it, just says unable to connect if I put hostname or IP... I'm guessing I'm missing something? Thanks
  16. Putty into MC seems to do exactly what I wanted. Thanks guys
  17. Stupid question time... I've setup my unraid server (woo) and installed the Unassigned drive plugin and it allows me to mount and see the contents of the NTFS drives... how do I go about copying it? If I do it via the windows machine I'm copying off the server, to the windows machine and back... kind of pointless
  18. Ah cool sounds like unassigned plugin is the answer as I can just have all the drives in the machine to start and then add them to the pool once finished! Thanks
  19. So I currently have 4x 2TB drives formatted as NTFS and about to build a unRaid box with 2x 8TB drivers (1 of them parity) and I want to get the data off the NTFS drives so I can then format them and add them to the pool. Whats the best way about doing this? I've read on the wiki about mounting NTFS drives as read only via USB but that would mean individually putting them into USB caddies... any other way? Thanks
  20. Korath

    FX-8350 Build

    Not sure how much I trust the 8GB stick I currently have, no idea how old it is as I found it at the bottom of a pile of scraped servers but I might just buy a 2x8GB set (it's only £20 more than just getting a single) and leave the old 8GB in there for 24GB and pull it if it have issues. As for the cooler, yeah its 100% a noise thing. The box will be in my bedroom so need is as quiet as possible.
  21. Korath

    FX-8350 Build

    Hey guys, long time lurker and pretty much sold on moving to a unRaid solution. My current n36l is at the end of its life and have some other parts kicking about so thinking I can make something very decent: Case: Fractal R4 (Owned) Csae Fans: 2x 140mm, 2x 120mm Noctua CPU: AMD FX-8350 (Owned) CPU Cooler: Stock was thinking maybe a Noctua NH-US12S (£40) Mobo: Sabertooth 990 2.0 (Owned) Ram: 1x8GB DDR3 (Owned) to be replaced by 16Gb (2x8) Kit (£60) GPU: nVidia 510 (Owned) PSU: 500W EVGA - Good reviews and more SATA connections than the equiv Corsair (£35) HDD1 (Cache) 128GB SSD (Owned) HDD2 (Parity) 8TB Seagate Archive v2 (£180) HDD3-6: 4x 2TB Samsung F3 (Owned) OS: unRaid 6 (£40) So by reusing what I have kicking about and pulling stuff out of the n36l I can build that initial box for around £350 and then start adding / replacing the 2TB drives with 8TB drives as and when I need more space. Does anyone have anything they would change or any other input? Also I've never run the FX8350 24/7, anyone know what sort of power draw I'd be looking at? It's going to be a bit of a step up from the n36l running cost wise but I have no idea how much... Running a VM testlab but not all the time, downloading stuff and PLEX.