rabbe

anyone?

Hi, I have 2 gaming-VM's om my computer. Both of them seems to work ok, but when gaming they both have lag and allso extreme delay when moving. Allso runs smooth a few secound now and then. Computer specs: i5-9600K ASUS TUF Z390-PLUS GAMING (WI-FI) 32GB ram 2x ASUS GTX1070-Turbo 8GB 240GB M.2-SSD 1TB SSD I finally got rid of the error code 43 when using: PCIe ACS override: Downstream VFIO allow unsafe interrupts: Yes Bios: OVMF Machine: Q35-3.1 I don't think there is any problem with the graphic card now. Even doh nvidia control panel shows; PCI Express x1. Both cards is placed in x16 lanes. Windows 10 power plan is set to high preformance and in BIOS i have tried pcie speed gen2, 3 and AUTO. All give same results. Even pcie x1 should work just fine. A little lower fps, but stable. I think there is a CPU problem. I have been google'ing and i found a lot about cpu cache and memory. But im noob, i dont understand what to test. My CPU does not have HT and i only have 1 CPU. All the other ppl i read about have HT and more than 1 cpu. I switched one of the VM's to use CPU Mode: Emulated (QEMU64), this works a lot better! It is now possible to play, but it's still not good enough to play FPS games. Not sure if this is useful, but i typed in some commands i found in other forum thread: numactl --hardware available: 1 nodes (0) node 0 cpus: 0 1 2 3 4 5 node 0 size: 32082 MB node 0 free: 321 MB node distances: node 0 0: 10 numastat qemu Per-node process memory usage (in MBs) PID Node 0 Total ----------------------- --------------- --------------- 4725 (qemu-system-x86) 12392.18 12392.18 14377 (qemu-system-x86) 16489.20 16489.20 ----------------------- --------------- --------------- Total 28881.38 28881.38 Thanks for any help! tower-diagnostics-20190818-0731.zip

Yea, I tryed that too. Cant use keyboard in Bios when i have SeaBios. I have this problem on all UNRAID OS-Versions I have tryed. Maby the solution is to change from windows 7 to windows 10? Have you tried changing the keyboard or the USB port? yes, tryed both. When I'm in "System recovery options" I can open command prompt. But i cant find any commands that force windows to start. Not that works with windows 7. msconfig does not work. You could try to remove the GPU pass through and add vnc to get windows booting again. Then shut down the VM and remove vnc and add back the GPU. ! You are my hero ! It worked! Thanks Keyboard works in VNC. Windows is stuck at loading screen, so i guess i have to reinstall anyway

Yea, I tryed that too. Cant use keyboard in Bios when i have SeaBios. I have this problem on all UNRAID OS-Versions I have tryed. Maby the solution is to change from windows 7 to windows 10? Have you tried changing the keyboard or the USB port? yes, tryed both. When I'm in "System recovery options" I can open command prompt. But i cant find any commands that force windows to start. Not that works with windows 7. msconfig does not work.

Yea, I tryed that too. Cant use keyboard in Bios when i have SeaBios. I have this problem on all UNRAID OS-Versions I have tryed. Maby the solution is to change from windows 7 to windows 10?

I cant be the only one with this problem? Can you use keyboard in bios when you use SeaBios for your VM?

Hi I rly need help! I dont want to reinstall windows whenever i get this. WINDOWS 7 X64 I had a bluescreen when i tryed to boot windows. Now, as default windows want to "Launch Startup Repair (recommended)" But he fail to repair and wont start Windows. I have R9 290X Video card so i use SeaBios. With SeaBios I cant get the keyboard to work. It works in Windows, but not in Bios. So the recovery option goes in a loop and i cant klick "Arrow down" to select "Start Windows Normally" :'( I allso tryed to boot from Windows DVD, but i cant.. becuse i cant press "any key to boot".. Pls help! Thanks!

Ahh! Thanks!

Hi I just downloaded and installed 6.2.0-rc4. When I'm creating a VM for Windows 7 i cant find any option where i can add virtio-win-0.1.117.iso I can only add a Windows 7 ISO, i dont find the HDD without virtio driver-pack when installing windows. I fixed this manually by adding this to my XML: <disk type='file' device='cdrom'> <driver name='qemu' type='raw'/> <source file='/mnt/user/isos/virtio-win-0.1.117.iso'/> <target dev='hdd' bus='ide'/> <readonly/> <boot order='2'/> <address type='drive' controller='0' bus='0' target='0' unit='1'/> </disk> It worked. Its been a few months since i tryed UNRAID. Is this virtio option removed or has it been moved to another place? Or maby I'm just blind. I used like 2 hours trying to find it Rabbe

I tryed "normal" keyboard first. But old sparc computers does not boot without sun-keyboard (by default), so i thought it was worth the try I dont use sparc now.

Hi I'm trying to install Solaris 10 and 11 as VM on unRAID. I use the default Linux VM and added a solaris iso, a Nvidia GTX 570 GPU and a SUN Keyboard. Solaris 10 - USB Mode 2.0(EHCI) It looks like its trying to boot, but nothing is happening. Solaris 11 - USB Mode 2.0(EHCI) I get the error: WARNING: /pci@0, 0/pci ...something.. (uhci0): No SOF interrupts have been received, this USB UHCI host controller is unusable. Solaris 11 - USB Mode 3.0(XHCI) The boot is coming futher. But it stil crash, look at pictures. I'm going to buy an USB 2.0 PCI-E and try passthrough it to Solaris, maby it helps. Anyone having an idea to solve this? Is it possible to run Solaris as a VM in unRAID? EDIT: I dunno how to get picture work.. http://pasteboard.co/1kGPkpMq.jpg http://pasteboard.co/1kGRQpz8.jpg

Thanks for replay. It worked!

Hi I'm going to buy some video cards for testing passthrough at work. Our programs only suppors Quadro and we dont need any monster cards. I have testet passthrough on the video cards we have at work to day, but it did not work. (Quadro 600). Have anyone tested the Quadro K2200? Will it work? Thanks.

I can now run the two VMs at the same time with no issue so far. (I think the freeze was caused by some USB problem when using USB-hub) But i stil need to restart the entire unRAID every time i try to restart the VM with GTX570 GPU. Because the VM goes black. I see this error in the log: Domain id=1 is tainted: high-privileges Domain id=1 is tainted: host-cpu Please help me modify XML to so i can load the GPU .rom file manually. Thanks!

Hi I have a lot of problems with my VMs. I can start a VM with Radeon R9 270X but when i use my Geforce GTX570 i get major problems. And the VM with GTX570 allso make my other VM crash.. At the moment I try to only have 1 VM running. The GTX570. After revomeing a trubling usb-hub I made the VM boot and installed windows. But if i reboot the system it does not come up again. Black screen. The only way to get it back up is to reboot unRAID. I read that this is a GPU problem and not a unRAID problem. So i have to set it to boot a .rom file manually. I did follow this guide: http://lime-technology.com/wiki/index.php/UnRAID_Manual_6#Edit_XML_for_VM_to_supply_GPU_ROM_manually I see there has been some changes in the 6.2beta21 vs 6.1.9 at this point. I'm a noob at this and i dunno what to do when its not looking the same as the guide. Please help me edit the XML to load the .rom file (6.2beta21). An other question; Can i have passthrough on a Nvidia GPU to one VM and a Radeon GPU to an other VM at the same time? I cant get this to work, but it might be something els causing it to freeze. Edit: My current XML file: <domain type='kvm'> <name>GamerPC2</name> <uuid>471e2244-9b69-28b9-04fc-7309791acf24</uuid> <metadata> <vmtemplate xmlns="unraid" name="Windows 7" icon="windows7.png" os="windows7"/> </metadata> <memory unit='KiB'>13107200</memory> <currentMemory unit='KiB'>13107200</currentMemory> <memoryBacking> <nosharepages/> <locked/> </memoryBacking> <vcpu placement='static'>4</vcpu> <cputune> <vcpupin vcpu='0' cpuset='4'/> <vcpupin vcpu='1' cpuset='5'/> <vcpupin vcpu='2' cpuset='6'/> <vcpupin vcpu='3' cpuset='7'/> </cputune> <os> <type arch='x86_64' machine='pc-i440fx-2.5'>hvm</type> </os> <features> <acpi/> <apic/> <hyperv> <relaxed state='on'/> <vapic state='on'/> <spinlocks state='on' retries='8191'/> <vendor id='none'/> </hyperv> </features> <cpu mode='host-passthrough'> <topology sockets='1' cores='2' threads='2'/> </cpu> <clock offset='localtime'> <timer name='hypervclock' present='yes'/> <timer name='hpet' present='no'/> </clock> <on_poweroff>destroy</on_poweroff> <on_reboot>restart</on_reboot> <on_crash>restart</on_crash> <devices> <emulator>/usr/local/sbin/qemu</emulator> <disk type='file' device='disk'> <driver name='qemu' type='raw' cache='writeback'/> <source file='/mnt/user/Vdisk/GamerPC2/vdisk1.img'/> <target dev='hdc' bus='virtio'/> <boot order='1'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x04' function='0x0'/> </disk> <disk type='file' device='cdrom'> <driver name='qemu' type='raw'/> <source file='/mnt/user/ISOs/Windows 7 Pro 64bit English.iso'/> <target dev='hda' bus='ide'/> <readonly/> <boot order='2'/> <address type='drive' controller='0' bus='0' target='0' unit='0'/> </disk> <disk type='file' device='cdrom'> <driver name='qemu' type='raw'/> <source file='/mnt/user/ISOs/virtio-win-0.1.117.iso'/> <target dev='hdb' bus='ide'/> <readonly/> <address type='drive' controller='0' bus='0' target='0' unit='1'/> </disk> <controller type='usb' index='0' model='ich9-ehci1'> <address type='pci' domain='0x0000' bus='0x00' slot='0x07' function='0x7'/> </controller> <controller type='usb' index='0' model='ich9-uhci1'> <master startport='0'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x07' function='0x0' multifunction='on'/> </controller> <controller type='usb' index='0' model='ich9-uhci2'> <master startport='2'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x07' function='0x1'/> </controller> <controller type='usb' index='0' model='ich9-uhci3'> <master startport='4'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x07' function='0x2'/> </controller> <controller type='pci' index='0' model='pci-root'/> <controller type='ide' index='0'> <address type='pci' domain='0x0000' bus='0x00' slot='0x01' function='0x1'/> </controller> <controller type='virtio-serial' index='0'> <address type='pci' domain='0x0000' bus='0x00' slot='0x03' function='0x0'/> </controller> <interface type='bridge'> <mac address='52:54:00:22:81:97'/> <source bridge='br0'/> <model type='virtio'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x02' function='0x0'/> </interface> <serial type='pty'> <target port='0'/> </serial> <console type='pty'> <target type='serial' port='0'/> </console> <channel type='unix'> <source mode='connect'/> <target type='virtio' name='org.qemu.guest_agent.0'/> <address type='virtio-serial' controller='0' bus='0' port='1'/> </channel> <hostdev mode='subsystem' type='pci' managed='yes' xvga='yes'> <driver name='vfio'/> <source> <address domain='0x0000' bus='0x02' slot='0x00' function='0x0'/> </source> <address type='pci' domain='0x0000' bus='0x00' slot='0x05' function='0x0'/> </hostdev> <hostdev mode='subsystem' type='pci' managed='yes'> <driver name='vfio'/> <source> <address domain='0x0000' bus='0x02' slot='0x00' function='0x1'/> </source> <address type='pci' domain='0x0000' bus='0x00' slot='0x06' function='0x0'/> </hostdev> <hostdev mode='subsystem' type='usb' managed='no'> <source> <vendor id='0x04b3'/> <product id='0x3025'/> </source> </hostdev> <memballoon model='virtio'> <address type='pci' domain='0x0000' bus='0x00' slot='0x08' function='0x0'/> </memballoon> </devices> </domain> tower-diagnostics-20160529-1017.zip

I see, I'll install another SSD for cache then. I realize i was a little to quick saying it worked. Well, I have the VMs tab now. But when I hit "OS Install ISO:" or "VirtIO Drivers ISO:" I have no option. My shares does not show. Settings - VM Settings - Advanced Settings, and set a share for the default ISO locations You are right. I have changed the versjon on the USB flash so many times that i forgot to change the settings this time. Thanks for all the help!

I see, I'll install another SSD for cache then. I realize i was a little to quick saying it worked. Well, I have the VMs tab now. But when I hit "OS Install ISO:" or "VirtIO Drivers ISO:" I have no option. My disks or shares does not show.

Thank you so much! It works

I can't find out how to change that option. I dont even find it. What do i do? Thanks

Sorry, I'm noob I tryed 6.2 beta20, stil no VM tab. This time i attached the diagnostics zip Thanks for helping tower-diagnostics-20160528-1036.zip

I dont have any errors in my log This is all info i have in the log: May 28 10:09:17 Tower root: realtime =none extsz=4096 blocks=0, rtextents=0 May 28 10:09:17 Tower emhttp: shcmd (70): mkdir -p /mnt/disk3 May 28 10:09:17 Tower emhttp: shcmd (71): set -o pipefail ; mount -t xfs -o noatime,nodiratime /dev/md3 /mnt/disk3 |& logger May 28 10:09:17 Tower kernel: XFS (md3): Mounting V5 Filesystem May 28 10:09:17 Tower kernel: XFS (md3): Ending clean mount May 28 10:09:17 Tower emhttp: shcmd (72): xfs_growfs /mnt/disk3 |& logger May 28 10:09:17 Tower root: meta-data=/dev/md3 isize=512 agcount=4, agsize=7814676 blks May 28 10:09:17 Tower root: = sectsz=512 attr=2, projid32bit=1 May 28 10:09:17 Tower root: = crc=1 finobt=1 spinodes=0 May 28 10:09:17 Tower root: data = bsize=4096 blocks=31258702, imaxpct=25 May 28 10:09:17 Tower root: = sunit=0 swidth=0 blks May 28 10:09:17 Tower root: naming =version 2 bsize=4096 ascii-ci=0 ftype=1 May 28 10:09:17 Tower root: log =internal bsize=4096 blocks=15263, version=2 May 28 10:09:17 Tower root: = sectsz=512 sunit=0 blks, lazy-count=1 May 28 10:09:17 Tower root: realtime =none extsz=4096 blocks=0, rtextents=0 May 28 10:09:17 Tower emhttp: shcmd (73): sync May 28 10:09:19 Tower emhttp: shcmd (74): mkdir /mnt/user May 28 10:09:19 Tower emhttp: shcmd (75): /usr/local/sbin/shfs /mnt/user -disks 14 -o noatime,big_writes,allow_other -o remember=0 |& logger May 28 10:09:19 Tower emhttp: shcmd (76): rm -f /boot/config/plugins/dynamix/mover.cron May 28 10:09:19 Tower emhttp: shcmd (77): /usr/local/sbin/update_cron &> /dev/null May 28 10:09:19 Tower shfs/user: shfs_mkdir: assign_disk: system (123) No medium found May 28 10:09:19 Tower shfs/user: shfs_mkdir: assign_disk: system (123) No medium found May 28 10:09:19 Tower emhttp: nothing to sync May 28 10:09:19 Tower shfs/user: shfs_mkdir: assign_disk: system (123) No medium found May 28 10:09:19 Tower shfs/user: shfs_mkdir: assign_disk: system (123) No medium found May 28 10:09:27 Tower shfs/user: shfs_mkdir: assign_disk: system (123) No medium found May 28 10:09:27 Tower shfs/user: shfs_mkdir: assign_disk: system (123) No medium found May 28 10:09:28 Tower shfs/user: shfs_mkdir: assign_disk: system (123) No medium found May 28 10:09:28 Tower shfs/user: shfs_mkdir: assign_disk: system (123) No medium found May 28 10:09:29 Tower shfs/user: shfs_mkdir: assign_disk: system (123) No medium found May 28 10:09:29 Tower shfs/user: shfs_mkdir: assign_disk: system (123) No medium found May 28 10:09:32 Tower shfs/user: shfs_mkdir: assign_disk: system (123) No medium found May 28 10:09:32 Tower shfs/user: shfs_mkdir: assign_disk: system (123) No medium found May 28 10:10:09 Tower shfs/user: shfs_mkdir: assign_disk: system (123) No medium found May 28 10:10:09 Tower shfs/user: shfs_mkdir: assign_disk: system (123) No medium found May 28 10:10:09 Tower shfs/user: shfs_mkdir: assign_disk: system (123) No medium found May 28 10:10:09 Tower shfs/user: shfs_mkdir: assign_disk: system (123) No medium found I just downloaded 6.2 beta 20, going to give it a try.

I had versjon 6.1.9 and made some VM's to test UNRAID. I just formated my USB flash and installed versjon 6.2 beta 21. I made the disk array, enable VMs with PCIe ACS Override and rebooted my server/computer. The VM tab does not show. How can i make VMs? Please help Thanks

I found out why i get the error, but i have no qlue how to walk around this. My keyboards stays at the same device number. But my lenovo mouse's gets a new device number every 1-2minute... why? I have 1 usb hub for each setup. 1 hub with mouse and keyboard and another hub with a mouse and keyboard. I thought maby the mouse got a new device number because it might disconnect and reconnect. But the keyboard are on the same usb hub and they dont get new device number. please help, thanks

I cant get this walkaround to work. My USB Devices: Bus 002 Device 009: ID 0951:1666 Kingston Technology DataTraveler G4 Bus 002 Device 005: ID 05e3:0610 Genesys Logic, Inc. 4-port hub Bus 002 Device 008: ID 04b3:3025 IBM Corp. NetVista Full Width Keyboard Bus 002 Device 029: ID 17ef:6019 Lenovo Bus 002 Device 003: ID 05e3:0610 Genesys Logic, Inc. 4-port hub Bus 002 Device 006: ID 04b3:3025 IBM Corp. NetVista Full Width Keyboard Bus 002 Device 028: ID 17ef:6019 Lenovo Bus 002 Device 002: ID 05e3:0610 Genesys Logic, Inc. 4-port hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub My modifyed XML: <hostdev mode='subsystem' type='usb' managed='yes'> <source> <address bus='2' device='29'/> </source> </hostdev> <hostdev mode='subsystem' type='usb' managed='yes'> <source> <address bus='2' device='8'/> </source> </hostdev> Then i get this error: internal error: Did not find USB device bus:2 device:29 Edit: I use UNRAID 6.1.9 64bit Please help! Thanks

I fixed it! Not sure what i did. I will try to fint out what i did ok, here is what i did: Make or edit VM Primary vDisk Location: If I choose: anything with Vdisk i get 512kB disk. feks: user -> Vdisk or disk1 -> Vdisk. But if i choose only: disk1 and write in 120g and press update, then i get 120GB hard drive cheers!