white13wolf

removed drive 4 (corupt data) - array says missing, emulated - formated the drive (plug in Unassigned Devices) - added it (as a replacement for missing drive) parity rebuild started

UFS finds only files no directory structure (about 3.5 TB of data to put back - imposible) - I did just that and data was bad after second rebuild (no active modifications on the array)

Hello, tried a rebuid after i got disk 7 back with no luck as parity was updated or something and the data was corrupted again. I think that : My only chance now is data recovery on the old disk4 - can't find a good software (folder tree missing in many) As a extra question, if parity/rebuild fail (one more drive disabled) should the array not stop and warn the user - error fix it or lose data? my "rebuild" just continued and messed up parity and all - also disk 7 is fine and working in the array now so ..... why disable it especially during rebuild

Hello, So I have a 7 disk array disk 4 became disabled so i replaced it with a different larger disk (4tb to 8tb) during the rebuild stage disk 7 became disabled - rebuild did not stop and finished (no errors given) I have checkd the data on the new disk and it's all corrupt after a reboot disk 7 came back on and was able to read/write data with no issue on the disk (including unbalance and getting all 2.8tb off of it with no issues) Problem is all the data on disk 4 (new 8TB one) is corupted and parity can not fix it as after the rebuild it is corrupt in the parity also. I do have the old "disabled" drive of 4tb but as an idiot I reformated it. Can anyone help me get the data (folder structure included) back Please help (Yes I know a back-up is needed but do not have the $$$ to double all my disks) me-diagnostics-20210119-0853.zip

I like the redundancy of drives and ability to add or remove drives as needed without braking up raid groups and moving tons of data or all of it I would like to see (find) the ability to join two servers into one ( iscsi or the like ) - to be precise make one box act as extra drives for the main one nothing else expected from it

Hey there i need a bit of help. I'm a noob so have a bit of patience please. I have a unraid box that has 2 nic's on the motherboard and a pci express x4 card with 4 1gb ports. I want to install pfsense to be a firewall and put the ISP PPPoE connection in one NIC that is NOT available to unraid ( want the internet to go in pfsense and then be routed in my home switch and give internet to all devices (pc, xbox, tv, unraid etc.) and not have my unraid exposed) can you help ? PfSense is not absolutely necessary (can use different os) i'm just familiar with this one. Thank you

Hello, I have the same issue, I have : Memory size allocated 3.201 GB installed 8 GB (max. capacity 8 GB) As i'm new, please tell me what info you need and how to get it. Thank you