Zeus

Thank you Fireball3. Before following the steps to flash, is there anyway to save the current FW on the card to a file so if I need to come back to the original I can. So far I'm unable to find the original firmware on Dell's website as it may be too old? Only the new ones are available. As for getting the LSI firmware later on, are there any major differences between P11, P16, ..., and the latest P20. Is the latest P20 the way to go?

Posted a thread earlier but haven't received any replies, thought I'd post it here. If anyone can help that would be great. It's my first time dealing with raid cards so I'm not entirely sure on how to test them before flashing. I'm preparing to create my first unraid machine. I purchased a Dell Perc H200 from ebay with stock FW and was wondering what would be the best method to fully test the card and make sure it's all working before updating it to the IT firmware. Hopefully so that if there is an issue with the card itself I can send it back and get another one. The Dell Perc H200 has 2 mini sas ports so I bought two of the 1x mini sas to 4x sata breakout cables and have a spare hard drive for testing. Is it safe to keep the hard drive running and switch sata ports and see if the hard drive is detected on each port of the breakout cables or will that damage it? It would be ideal since I can test both the controller and the cables. Some info about the Dell Perc H200: 8 ports PCIe x8 Sata 3 SAS2008 rebranded LSI 9240-8i (info from the great wiki by lime-technology) Thanks in advance.