• Posts

  • Joined

  • Last visited


  • Gender

bhman79's Achievements


Newbie (1/14)



  1. I'm running into issues connecting to dockers when the default port number isn't used. Sometimes it works and most of the time it doesn't. Everything I've googled comes back as people trying to use "host" and I'm not. See attachments.
  2. I upgraded to the newest Unraid and it fixed the problem. Thanks!
  3. Unraid 6.4.1 Plugin 2019.02.09 Update of OpenVPN packages to 2.4.6-2
  4. I am now getting this error" openvpn: error while loading shared libraries: cannot open shared object file: No such file or directory
  5. I removed all but one 4GB stick and the system is screaming fast. I just need to figure out now which stick(s) are bad. Thanks!
  6. I'm having this same issue. What was the culprit of your problem?
  7. This is my first go round with Unraid coming from FreeNAS. I was able to get everything running with 2 HD Red 3TB drives and a Kingston 240GB SSD for a cache. Everything seemed fine until I tried to run Plex. I was getting constant buffering trying to only run one stream locally in my house. The Xeon processor should be able to handle that and it worked fine when I used it in FreeNAS. I was also getting reboots to the system at random times. I decided to try a different flash drive to boot UnRaid from. After this when I started building my parity, I got around 150MB/s. Around the 2TB range, however, it drops to around 9MB/s and shortly after the server is offline. This morning I got a picture of the error message (attached). I'm thinking this could be bad RAM, but after a week of struggles thought it was time to call in the experts. Model: Custom M/B: Supermicro - X9SRA/X9SRA-3 CPU: Intel® Xeon® CPU E5-2670 0 @ 2.60GHz HVM: Enabled IOMMU: Enabled Cache: 512 kB, 2048 kB, 20480 kB Memory: 32 GB (max. installable capacity 512 GB) Network: bond0: adaptive load balancing, mtu 1500 eth0: 1000 Mb/s, full duplex, mtu 1500 eth1: 1000 Mb/s, full duplex, mtu 1500 Kernel: Linux 4.4.30-unRAID x86_64 OpenSSL: 1.0.2j