-
Posts
300 -
Joined
-
Last visited
Content Type
Profiles
Forums
Downloads
Store
Gallery
Bug Reports
Documentation
Landing
Posts posted by ksignorini
-
-
On 9/3/2018 at 8:18 PM, david279 said:
Tiano core boot menu. I think you hit delete when its booting to get into the menu. Set the correct resolution for your VM there.
I've tried Delete, F1, F2, F12, all the other F keys, etc. I'm pretty sure one of them is working because at that point, the TitanoCore logo stays on screen and the booting stops. I figure it's because I actually am in the boot menu, but just can't see it.
-
On 9/4/2018 at 5:57 AM, testdasi said:
Clover always asks me what to boot with (even when I have only 1 partition) so not sure what you meant by seeing nothing from TianoCore to OS boots.
I don't see Clover. I see the TitanoCore logo and after a few seconds (maybe 20) the next thing I see is the Apple logo.
-
On 9/4/2018 at 6:09 AM, 1812 said:
as mentioned before there are circumstances where, when passing through a gpu you will only see the tianocore logo follwoed by a black screen. Then it won't come up again until the os loads (typically macos) once the gpu drivers have been loaded by the os. this does not occur when using only vnc. it may be able to be solved by injecting graphics drives with clover, but I've never futzed with it.
This is exactly it. I actually am injecting the Nvidia web drivers, and they work in the OS, but don't affect the boot screen from what I can tell.
-
18 hours ago, gridrunner said:
You can try setting the timeout longer for clover before it auto boots (in the clover configurator ) so its up longer.
Maybe try connecting the 1070 to a different port hdmi/displayport etc. you may see it during the boot process then.
I'll try with the timeout.
My 1070 has only 1 HDMI port, but with some fidgeting I might be able to try the DP ports.
-
Not sure what you mean? Which boot menu?
-
Latest Clover as of yesterday (don’t have the number with me).
-
I've also tried just putting the HDMIaudio.kext into Clover in the EFI partion following these directions https://www.tonymacx86.com/threads/clover-hdmi-audio-for-nvidia-amd-cards-easy-way.145399/ (after uninstalling it from the macOS folders and rebuilding the extension caches first).
Still no luck.
-
I've watched Spaceinvader One's video on advanced macOS VM config. I've got almost everything working, except...
HDMI Audio.
I've copied the HDMI audio XML from my working Windows 10 VM to the macOS VM (and removed the address line, letting the VM manager re-add the line appropriately). I've installed the recommended HDMI audio kext (version 1.1 from the video).
Still, my HDMI audio device does not show up in macOS.
Any ideas or suggestions to fix this?
-
11 minutes ago, 1812 said:
normal behavior when you only have 1 gpu in the system (and sometimes 2)
So, you never have to see Clover again? Like, it's not ever necessary?
-
Oh yeah, I can see the Tiano Core logo (big and stretched). But after that, nothing until the VM's OS runs.
-
First, my macOS VM boots and I can use the OS at full resolution on my ultra wide monitor. I've passed my GTX 1070 through and am using the matching (build) Nvidia web drivers. I've checked off all the appropriate places in CloverConfig.
However, when I boot I can't see Clover. When I was using VNC rather than the passed through GPU, I could see Clover just fine. Now, I can't. I'm thinking it has something to do with Clover's resolution setting, but I've tried changing it to all the common resolutions and some weird ones, and no matter, I can't see Clover on boot. (Luckily it boots past Clover just fine.)
Can anyone help me see Clover on boot?
Thanks!
-
Apparently you use F2 now.
Who knew?
(Probably 1/2 the internet.)
-
I got the VM up and running using the latest Clover (4658) and High Sierra from install media. I made all the changes to the XML as directed in the initial video.However, I have no network connection from inside the VM.Here's my xml. Do you see anything amiss?Thanks in advance.Nevermind. Now it works for some reason.
-
I was able to physically rearrange ports and got them separated so that I can pass USB3 through.
Thanks for for the help.
-
I'm building some VMs using the OVMF bios choice (always used SeaBIOS previously) and on booting the VM I want to change some BIOS settings. I'm pressing DELETE repeatedly on reboot of the VM but I never get into the BIOS settings screen (as many videos I've watched have shown I should be able to do).
Thoughts?
Thanks!
-
Thanks!
How come 00:14.0 only shows up once in the IOMMU groups list? Is that because that controller manages both USB3 and USB4?
-
I've been passing one of my USB 2.0 busses through for a long time (1a.0 called USB1). Now I want to pass through my USB 3.0 bus. However, here's what I find from the various commands and SysDevs. The problem is that both USB4 (USB 3.0 port I want to pass through) and USB3 (one of the other USB 2.0 ports) both show up as 14.0 with a readlink command and my unRAID USB is on USB3 (the Kingston DataTraveller).
So I don't know whether or not its safe to pass the IOMMU group that 0.14 is in through (that's group 2 from what I can tell....but maybe not!).
Thoughts?
Thanks for your help in advance.
-
On 7/16/2018 at 3:30 PM, joefreg said:
I can't seem to get any version of v5 to open the WebUI. Any suggestions? I can get v4 to open the WebUI.
I figured it out because I was having this problem too. The link takes you to http:// where it requires https:// so click the link, edit the URL in your browser, and stick "http://" in front of it. Then the web UI loads.
-
This is curious.
I set all the variables the way suggested in @adoucette's video. I can access the web UI by pointing me browser at: 10.0.0.10:9000 (I used the default port for now). I can log in and create buckets. I can even back-up to them with CloudBerry Backup running on my Mac. Yay!
However, my right-click menu for the new Minio docker app does not have "Web UI" as an option. Any ideas?
-
2 hours ago, adoucette said:
Apps --> CA Settings --> Docker Hub Searching \ Enable additional search results from dockerHub? [set to Yes] --> Apply
Search againYup! Working great now! Thanks!
-
... okay. There's an option in CA Settings to allow the DockerHub downloads. Found it.
Thanks soooo much for the video. I'm sure I'll get it going now.
-
Maybe it's not in the default template repository? The only one I have is:
-
-
Here's the thing...
When I search Apps for Minio, it doesn't come up. That's what's throwing me.
Can't see Clover after passing through GPU
in VM Engine (KVM)
Posted
Which lines in Ed's XML? My XML boots my VM and passes through GPU, USB, and other gear. I'm not sure what lines would be the problem.