Jump to content

Carmico

Members
 View Profile  See their activity

  • Posts

    25

  • Joined

  • Last visited

 Content Type 

Posts posted by Carmico

    [Support] Djoss - JDownloader 2

    in Docker Containers

    Posted

    7 hours ago, Djoss said:

    Do you see any related error under /mnt/user/appdata/JDownloader2/logs/ ?

    Also, if you can share the link, you can send it to me via private message and I will try to reproduce.

    believe me that problem is not the filecrypt container link, the link works with other JD2 , just with JD2 on docker doesnt work , i read on JD forum that seems to be related to the FF linux version

    [Support] Djoss - JDownloader 2

    in Docker Containers

    Posted · Edited by Carmico

    with this docker i have problems decrypting Filecrypt containers, if i add one, the links of the filecrypt html show as OFFLINE 

     

    already updated JD2 and even reinstall the docker

     

    with JD2 directly on the pc, filecrypt containers works without problems , so i guess there is a problem with JD2 on the docker

     

    image.thumb.png.c6baa83a0bda627f789e6fe9e6e64338.png

    the Array doesn't save the configuration after Restart

    in General Support

    Posted

    1 hour ago, itimpi said:

    This has been seen before - not sure what causes it (it seems to be browser dependent in some way).    The workaround is to start unRAID in Safe Mode, assign the cache disk, and then restart in normal mode.    This normally seems to fix the issue.

     

    i tried with another Browser, but same problem

     

    as you said, the workaround is to start unRAID in Safe Mode, assign the cache, start the array, stop, and reboot <- SOLVES THE PROBLEM 100%

     

    thanks!

    [support] limetech's docker repository

    in Docker Containers

    Posted

    what's the container /data stand for on Plex Docker (official repository) ? 

     

    i'm using UnassignedDevice (ssd nvme) for dockers & vms , so i move everything to that device , but don't know on Plex docker what's /data mean

     

    for /transcode i put /tmp tu use Ram

     

    for /config i put my appdata folder on the UnassignedDevice

     

    for Media, i add a new map so /Media point to share /Media on my array

     

    but for /data ?... or data refers to Media ?

     

    VM tab blank

    in General Support

    Posted · Edited by Carmico

    i have a problem, i delete libvirt image file and set to my UnassignedDevice and now the VM tab is blank

     

    VM: Yes but doesn't start , Status: Stopped

     

    wHTor9q.jpg

     

    in the logs i see this:

     

    Apr 11 17:45:40 Mserver emhttp: shcmd (1010): set -o pipefail ; /usr/local/sbin/mount_image '/mnt/disks/SSD 960 EVO M.2 NVMe/system/libvirt/' /etc/libvirt 1 |& logger
    Apr 11 17:45:40 Mserver root: /mnt/disks/SSD 960 EVO M.2 NVMe/system/libvirt/ is not a file
    Apr 11 17:45:40 Mserver emhttp: err: shcmd: shcmd (1010): exit status: 1

     

    i tried delete file already, but nothing changes

     

    i don't have libvirt.img anymore because i delete all default shares on Array because using my UA SSD NVMe for all my dockers & vms 

     

    so in my UA NVMe i make equal 1:1 to default folders

     

    urZPOZ8.jpg

     

    i don't have any VMs yet

     

    how to solve this?

     

    thanks!

     

     

     

    Unassigned Devices - Managing Disk Drives and Remote Shares Outside of The Unraid Array

    in Plugin Support

    Posted

    22 minutes ago, trurl said:

    If you look just 3 posts before yours, you will see the answer to this which was asked only a few days ago. That answer was copied from the very first post of this thread. Everyone should read the first post of the support thread if they are going to use any plugin.

     

    i was confused

     

    now i know there's no Format Label, but Mount Point & Share ;)

     

    got it, and modifed

     

    thanks!

    LSI Controller FW updates IR/IT modes

    in Storage Devices and Controllers

    Posted

    14 hours ago, johnnie.black said:

    Already replied in the PM, in my experience it works the same without them, but you can generate a random one, see the end of this post:

     

     

     

    solved assignin a random sas address

     

    Quote

     

    The High part of the SAS address for LSI controllers is '500605B'
    The other nine numbers can be anything you want.

    So you could make it '500605BXXXXXXXXXX'

     

     

    sas2flash -o -sasaddr 500605BXXXXXXXXXX

     

    ;)

    LSI Controller FW updates IR/IT modes

    in Storage Devices and Controllers

    Posted · Edited by Carmico

    DONE

     

    flashed 5.1, 5.2 and 5.3 on efi, 100% complete

     

    but fuck, have another problem now!!!

     

    don't have anymore the SAS address ............................. because i just reformated with refus the whole package from the start to try the flash again , and lost everything of step 1 and step 2....

     

    and now?! i don't see stickers on the card with sas address

     

    MtC2XYx.jpg yn2EOJd.jpg

    LSI Controller FW updates IR/IT modes

    in Storage Devices and Controllers

    Posted · Edited by Carmico

    On 21/8/2013 at 2:59 PM, Fireball3 said:

    If you experience the "failed to initialize PAL" error somewhere in step 5, you have to boot from

    UEFI shell and try again

     

     

    i'm stucked here because "failed to initialize PAL" on step 5.3, this after step 3 and reboot...

     

    so boot on EFI Shell, take in -> fs0: ... but don't know what steps to do here

     

    1gVd5WJ.jpg

    LSI Controller FW updates IR/IT modes

    in Storage Devices and Controllers

    Posted · Edited by Carmico

    Fireball3 , i got a Dell H310

     

    i'm a little confused on what procedure to use and what version for IT mode, can you please confirm to me what is actually the right procedure and best version to flash?

     

    i read that P20 version has some problems/issues, by the way, you are using P19 version

     

    another thing, Official Dell H310 IT Mode Firmware seems to be the easiest and fastest method... but is based on an old lsi firmware version

     

    THANKS !!!

    unRaid on Fractal Node 804 with Z270m i7 7700T + HBA 8p SAS

    in Unraid Compulsive Design

    Posted · Edited by Carmico

    This is the System::

     

    Case: Fractal Node 804

    PSU: EVGA P2 750W

    MB: ASrock Z270M Extreme 4 6* SATA3 ports (or 4 if you use the 2x M.2)

    CPU: i7 7700K

    RAM: Corsair Vengeance LPX 2x16GB DDR4 32GB DDR4 3000MHz CL15 

    USB: Leef Magnet 16GB

    HBA: Dell H310 flashed ITmode

    NIC: HP NC360T PCI-E Intel Dual Port Gigabit Server Adapter

     

    Disks:

     

    Parity: 1x 4TB WD Gold

    Data: 2x WD Red 4 TB (more coming, alreaxy have 4x 1.5TB WD Green, gonna swap with Red 4TB)

    Cache: 1x Samsung 850 PRO SSD 256 GB


    VM: Samsung 960 EVO NVMe M.2 250 GB PCI Express 3.0 

     

     

    unRaid on Fractal Node 804 with Z270m i7 7700T + HBA 8p SAS

    in Unraid Compulsive Design

    Posted · Edited by Carmico

    yeah, i will go with the 7700 non T for extrapower , maybe can go with 7700k to make more value when have to sell for upgrade...  but TDP raise too much

     

    why only single ssd cache? better 1x 500gb or 2 x 250 gb?

     

    same thing about parity? new version has dual parity, so i think is better 2x 4 TB or 1x 6 TB (future-proof-expansion) ?

     

    now 4 TB has better price, but maybe 6 TB price goes down in near future

     

    can i start unraid with just 1x parity and 1x data so i can transfer all my data from the already DrivePool 4x 1.5 TB WD Green to unraid , and then when transfer complete, add the wd greens to the unraid array.. right?

     

    thanks to all!

     

     

     

    unRaid on Fractal Node 804 with Z270m i7 7700T + HBA 8p SAS

    in Unraid Compulsive Design

    Posted · Edited by Carmico

    hi guys

     

    i'm from italy

     

    what do you think about this config for unRaid Plus (12 devices) ?

     

    Case: Fractal Node 804

    PSU: EVGA P2 750W (already have)

    MB: ASrock Z270M Extreme 4 (with rgb led so gonna be cool view within 804 window side panel) 6* SATA3 ports (or 4 if you use the 2x M.2)

    CPU: 7700T (low power) or 7700 "non K" 

    RAM: Crucial Ballistix Sport LT 2x16GB DDR4 32GB DDR4 2400MHz CL17 - 1.2 V - unbuffered - non-ECC (already have)

    USB: 32gb 3.0 (already have)

    HBA: Dell H310 flashed ITmode (ebay)

    NIC: Dell Intel pro/1000 VT QuadPort Gigabit Ethernet (ebay)

     

    Disks:

     

    Parity: 1x 4TB or 1x 6TB (but is too pricey imho)

    Data: 4x WD Green 1.5 TB (already have) , in future wants to add 4x 4TB (and maybe add the 2nd parity)

    Cache: 2x Crucial MX300 275GB 


    VM: Samsung 960 EVO NVMe M.2 250 GB PCI Express 3.0 

     

     

    i think gonna be overkill, but i prefer a config future proof and with good commercial value...

     

    this way, if don't need anymore i can transform in a full desktop worskstation or 

     

    my needs: 

     

    NAS (80% media, backup, dropbox shared, and some other)

    PlexServer on Docker (3 streamings, only one or two (not always) need transcode from h264 1080p to h265 1080p)

    1 VM win10

    1 VM for sperimental distro lab 

    1 VM PFsense (but don't think so, i already have an ubiquiti edgerouter pro), just want to get a try to pfsense

     

    and some other docks like unifi, jdownloader, torrent

     

     

    suggestions?

×
×
  • Create New...