Mojo Ryzen

I saw that this morning on the r/unraid subreddit and I sighed audibly because of all the time I spent reading posts and troubleshooting. So many restarts and logs and googling and searching the forum. I have a few remaining issues to troubleshoot unrelated to macvlan but I'm going to move to 6.12.4rc as soon as I can. Thanks for the continued support.

@dlandon, sorry for the delay, it took me some time to work through the issues you pointed out and gave me guidance on and man this combination of cache plus macvlan issues was a pain in the ass. I ended up reformatting my cache drive and rebuilding from a backup plus I deleted my Docker vdisk and rebuilt that from the saved app templates. There may have been a better way but I got everything running again and then ran your pre-clear plugin (took 3 days) but it finished successfully! Thanks again for everything, hopefully it's smooth sailing from here!

@dlandon, so my server crashed unexpectedly between 7:21pm and 1:20AM. I don't think it's the preclear process, but I've been having unclean shutdowns for unknown reasons so I mirrored my syslogs to flash and the last one is attached from 7:21pm. My cache drive had some corrupt files on it and I fixed those but it's still crashing. is there anything you see that would explain the repeat crashes? Sorry if there's a better forum, this is the only thread I have to pull on right now. syslog

Awesome, thanks so much. I just started a new preclear cycle, I'll report back in about 3 days on how it goes.

Hey @dlandon, I just saw your update to the preclear plugin come out. Wanted to check to see if this is what I need for my 20TB drive. Standing by ready to go, just give the word.

You've done so much for the Unraid community, I'm happy to help you any way I can.

The help is much appreciated. Let me know what else I can do to assist with the troubleshooting. tower-diagnostics-20230812-0830.zip

@dlandon I waited for the second update and ran pre-clear on my 20TB drive and the process errored in post-read verification again. Here are the SMART report and preclear logs from the most recent run. tower-smart-20230812-0042.zip preclear_disk_ZVT7PPG9_31998.txt

@dlandon I saw the update to the plugin this morning. Thanks so much for the quick turnaround. I'll report back in a few days with the results!

Hi, I bought a new 20TB drive that I've pre-cleared 3 time and it has failed in Post Read every time. I've run MemTest86 with no errors. I've changed the sata cable and power cord and pre-clear still failed. I'm here to verify if I got a bad drive and need to return it or if something else can be gathered from the logs. I've attached the most recent SMART Log after the most recent failure tonight. Thanks in advance for help! tower-smart-20230808-2141.zip

I figured out I needed a video card during my initial build in March. My monitor was bad and I bought a new one and was able to get into the BIOS. I was running an old version of it and updated it. The update allowed me to turn off the Global C State control as recommended in the main Ryzen thread. My server has been running for a few days now without any issues, hopefully it continues.

Thanks! Started reading it from the beginning this morning. My real worry is that I have a bad piece of hardware - CPU or something else. When I try and boot into the BIOS, the monitor has the intro graphics, then flashes the BIOS screen for a second, then goes black. Might be something wrong with the monitor but maybe not, seems to work fine otherwise. Can't update any BIOS settings since I can't boot into it. I hate troubleshooting sometimes.

I read through many, many pages but not all 19+ pages, I followed a lot of what u/Pauven was saying because he seemed to have similar problems, I tried some of his fixes to no avail. You had a lot of good advice too (thanks for looking at my problems) but nothing has worked yet. Should I just buckle down and read it all? Does my Syslog help at all?

Every time I search "Unraid" and "Ryzen" I get the "anyone planning an Unraid Ryzen build" thread, which seems to be troubleshooting IOMMU problems. Is there a better thread?

Hi All, I've been searching for about a month for an answer to my random crashes in Unraid, basically since I started my trial period, but I've found nothing. I've had random crashes with no resolve. I started on v 6.3.3 then upgraded to v 6.3.4. I am at the end of my trial period and I'm up in the air about buying the product if I can't fix these random crashes. I've tried Fix Common Problems repeatedly with only a "potential hardware problem" message. I've seen in my syslog "mcelog AMD Processor family 23: mcelog does not support this processor. Please use the edac_mce_amd_module instead". I've taken my server apart and put it back together more than once, tested all the connections, etc. I've been up for as long as 5 days or as short as a few hours. I've attached a syslog from before a random crash on 5/26/17. I also have a diagnostic file from earlier in the month that might provide some insight. I'm running Ryzen 1700 with Gigabyte GA-AB350M Gaming 3 Micro ATX AM4 mobo, additional parts listed in the link below: https://pcpartpicker.com/list/VqPMgL Any help that anyone can provide will be very much appreciated. I really love Unraid but it's hard to use it when it's always crashing. tower-syslog-20170526-2320.zip tower-diagnostics-20170512-1012.zip