JDBall

Members
  • Posts

    14
  • Joined

  • Last visited

Everything posted by JDBall

  1. There shouldn't have been any at all as I had shutdown all containers that could potentially write to the array. Anything else I can try?
  2. Unfortunately the emulated disk does not mount. it say unassigned - I guess this means that my parity is no longer valid?
  3. Hi all, Hoping that you can help. I was replacing a good 6TB drive with a 12TB drive (Disk 5) and during the rebuild I noticed that read errors we're rapidly increasing for Disk 6. I cancelled the rebuild as I've been having errors from time to time on a new HBA that I recently installed and reconnected Disk 6 to a SATA port on the motherboard. After restarting my server Disk 6 could not be detected at all. I've tried connecting it to another PC and it can't be found in BIOS and doesn't appear to powering on. The Data on the old Disk 5 should be vaild. I have set the new unassigned disk to the slot for Disk 6 and the old disk to the slot for Disk 5. Next to the Start button the UI says "Too many wrong and/or missing disks!". Hoping that you can give me some guidance on how to make Disk 5 active and hopefully rebuild Disk 6 from parity. Diags attached. James unraid-diagnostics-20211109-1229.zip
  4. So set to No I can't connect, set to yes I can everytime. Netstat from the container console shows the IP Address from my mobile provider connected to 8118. The 404 error pages returned are from Privoxy. Happy to share the IP Address with you via PM if you want to try connecting yourself?
  5. There's no options at all in their portal. It's an extremely bare bones solution only having infrastructure in Sweeden. I tried PIA recently as an alternative but the performance from Singapore wasn't great. I wonder if iPredator has changed something on their side?
  6. Yes, using the Public IP Address assigned by my VPN provider as the Proxy IP Address, Port 8118, on my Laptop when tethered to my phone works.
  7. I mean that I had changed the container variable STRICT_PORT_FORWARDING to no which I thought had fixed the issue as I wasn't seeing any remote connections to Privoxy. I've just tested from outside of my network and can stil connect. My Firewall isn't port-forwarding to Privoxy - the inbound connections are coming over the VPN.
  8. Thanks for quick response. Yes, I realised after posting that Port Forwarding was enabled in my config and once disabled I can no longer connect from the outside I've been running this container and config for several years but haven't had this problem before - strange.
  9. PSA if you're using Privoxy: My Deluge VPN container has been mis-behaving, potentially since the last update. I started regularly receiving the "Maximum number of open connections reached" message when connecting to the Deluge. This is always something that has happened for me from time to time, but usually took a couple of days of uptime. Since the last update, it started happening within an hour or so. Netstat shows a very large number of connections from the internet to the Privoxy proxy port. I have confirmed that it's possible to connect to Privoxy from the internet e.g. Privoxy is working as an open proxy. Not sure if something has changed but I thought that I would share with you all. It should easy enough to fix through the Firewall.
  10. Same problem for me when preclearing 8TB drives via USB. Thanks
  11. 28th April 2017. I sent them another one just before submitting this post. Let's hope that they answer this time. If not I may try Asrock support as opposed to Asrack. James
  12. Hi, I didn't get the Xeon yet - still using the I3 so nothings changed apart from the BIOS update. I suspect that the new BIOS has a bug, unless that is, there's some other setting that needs to be changed? James
  13. Hi, Hoping that someone can help: I recently built my first UNRAID server and everything was going great until I upgraded the BIOS of my Asrack C236 WSI Motherboard from P1.00 to P.2.10. When I first built my UNRAID box I installed a Skylake I3-6100 to use as a stopgap until the Kaby Lake Xeon E3's were released. Now available, I upgraded the BIOS to support Kaby Lake in preparation for purchasing a 1245-v6. Since I upgraded the system I can only get display output from an Nvidia 1050ti installed in the PCI slot, even with Onboard selected as the Primary Graphics Adapter in BIOS. I have also tried setting IGPU Multi-Monitor to Enabled/Disabled but neither setting makes any difference. Prior to the upgrade, I used the iGPU as primary and was able to pass through the 1050ti to my Windows 10 VM for Kodi and Gaming with everything working perfectly. Are there any other settings in BIOS that I need to change to make this work? Can I safely roll-back BIOS to P1.00? Anything else that I have missed? I contacted Asrack support through the form on their WWW site around 4 weeks ago but did not receive a reply. Thanks, James