bill_in_socal

I just got the preclear .25 update notice. Updated the plugin and it's working as expected now! Thanks.

I'm on 6.2 also. For me preclear just says "starting" and remains there. No apparent CPU load either. My box has 4GB RAM. tower-diagnostics-20160925-1500.zip

I just finished preclearing a 1TB disk with the previous version of preclear. Then, I updated Preclear to the .23a version. Now, I attempt to preclear a 2TB disk and all I get is a blank popup windows, and the status remains at "starting" Anyone experiencing the same? I would appreciate any suggestions. Thanks!

Adding another 2GB RAM to my unRaid box solved it. A big "Tip 'O The Hat" to you itimpi !

Many thanks itimpi. I think I have the appropriate RAM here somewhere. I'll just try adding RAM and post back.

The preclear plugin no longer works on my system and seems to terminate with Fork: Cannot Allocate Memory. I have used the plugin successfully in the past. Can someone please give me a clue? I just upgraded to unRaid 6.2 and my system has 2GB RAM. Many thanks!

A huge Tip 'O The Hat to you jomp and to everyone who replied! Upgrading to V6.1.9 seems to have restored it all. Web GUI now accessible, disks mounted and parity check running. Thanks again for all the help.

Go to the Plugins page - you will see one for the unRAID OS. Press the Check for Updates button and that should give you the option to upgrade unRAID. But I can't get to the unRAID GUI, that's my whole problem. I can Telnet in however and I can also pull the USB from the box if I need to. The reason for this thread is that I can not access the Web GUI.

I'm feeling kind of foolish here, but I can't seem to find instructions on upgrading from older V6 (6.1.7) to newest stable V6 (6.1.9). I think I only copy over a couple of files, but need to be sure. Could you please point me to the docs? My setup is really stock with only the Pre_clear plugin as I recall. Many thanks.

Thank you kizer. I'm pretty sure the NIC is up because I can Telnet into the box OK. This morning, I also pulled the USB and ran a chkdsk - all clean, no repairs necessary. I am willing to try any commands or diagnostics you can think of. I am also attaching a diagnostic from this morning if that is of any help. Thank's for the reply! tower-diagnostics-20160316-1005.zip

Memtest has now run for over 8-hours with no errors. What might I try next to get this box back online? I now see that upon reboot, I do connect to the Array webpage initially. However, if I click any other selection such as "Dashboard", my browser disconnects and says: This site can’t be reached 192.168.2.236 refused to connect. ERR_CONNECTION_REFUSED This is a really simple unRAiD box, no Plex or VM's, no Docker. Just a few shares for data storage. And it was running fine for months. I did not make any changes to the box before this problem. I do have a 2nd (spare) USB that I bought from Limetech with the server. Thanks for any suggestions.

Thanks very much trurl. I just started a memtest and so far (25%), all good. I'll let it run though and post back.

My V6 server has been running for months now and I have made no recent changes. Today, I cannot access the Web GUI and it reports: This site can’t be reached 192.168.2.236 refused to connect. ERR_CONNECTION_REFUSED I am able to telnet in and tried a "Reboot". All I can see via SMB is Flash. I did run a Diagnostics from Telnet and have attached the zip file here. Can anyone please take a look and possibly suggest an action for me? I am a Linux infant, but can issue the commands I'm told to Thanks very much. tower-diagnostics-20160315-1627.zip

Yes, parity drive is in the correct slot. It's the only 2TB drive on the system. Started the array, parity sync in progress. My files appear to be all there and accessible. I'm a happy camper. Thanks for helping me out Joe. Happy New Year!

As always, thanks Joe! I hit a snag - I am unable to copy files off the old USB key. It's not even recognized by my PC. I had an older file copy of my USB, but copying that one over resulted in several "red" marked drives and an error about invalid expansion. I had apparently changed out some drives since the copy was made, and don't have a current backup. (lesson learned) So, I copied back the original "blank" config to the new USB key and again have all "blue" drives and button to start the array. Will I be OK doing this? Thanks again.