callummc

Members
  • Posts

    50
  • Joined

  • Last visited

Everything posted by callummc

  1. Give this a try : Go to unRAID --> Settings --> Community Applications --> General Settings Find an option labelled "Enable additional search results from dockerHub?", and change the drop down to "Yes". Click "Apply" Then click "Done". Go to unRAID --> Apps and locate the search field (top right hand corner of the Apps page) Type "ib docker" (no quotes) and click the search button. You'll be shown a Community Applications (CA) Search Page which states that there was "no matching content found", Inspect the search page closely however, and you'll see a docker icon/logo in the middle of the page, with a link underneath labelled "Get more results from DockerHub". Click the link and a short search will be then be conducted on your behalf, resulting in a list of potential apps from the DockerHub. Select your preferred version, click "Add" and follow the prompts (same as adding a docker from the CA "Apps" section of unRAID) Please note that Ryan Kennedy of ryankennedy.io has not published this app on DockerHub (his only public repository is DeepDream - last updated 2 years ago) so the specific code you likned to will not be shown in the search results. However if I understand your intent correctly, I believe that a search conducted via the community applications "Apps" page will list several dockers for the same "Interactive Brokers" application, essentiually assisting you to achieve the same outcome (getting the IB app running in a docker on unRAID). A casual inspection indicates that the 5th, or perhaps 8th app, in the search results might be worth a quick look. Hope that helps
  2. When you referenced : --restart=unless-exited Is there any chance that you meant? --restart=unless-stopped I attempted your suggestion, however it caused the docker to fail when executing the run command. When I then tried to look the command up online, I couldn't locate it anywhere in the Docker documentation. A little further digging, and I found the "unless-stopped" reference, which sounds quite similar. Not sure if you've made a typo or I've missed something. But as "unless-stopped" does not cause the docker to crash, I've temporarily set it to that for now (docker runs - no problem), and hopefully it fixes the issue described earlier (so far, so good!)
  3. +1 Just switched to a Foxconn Renaissance II X58 Motherboard and I'm getting the same message.
  4. Yup - keyboard it was. Simple trip down to the Supermarket (too late for the IT shop ) and $20 on a elcheapo Logitech USB keyboard and we are off and running...
  5. Update : After some scratching around I've got a feeling that this has something to do with the keyboard that I'm attempting to pass through. It's a Dell USB keyboard with a couple of USB ports on the back. I'm starting to suspect that it might have something to do with the inbuilt USB hub. Does anyone have any experience with anything along these lines?
  6. Hi yall, I'm trying to run up an instance of XBMC in a VM with PCIe passthrough for the video card. I have the following settings configured under the ASROCK BIOS : * IOMMU - Enabled * SVM (AMD-V) - Enabled Which results in nice messages being displayed on the info tab in unRAID (Screen Shot 1) I've got an SSD formatted as BTRFS and mounted using the "Unassigned Devices" plugin, located at /mnt/disks/virtual. On this disk I've created two folders "filesys" and "iso", where the latter folder contains an image of Kodibuntu titled "kodibuntu-14.0-helix_amd64.iso". I've configured a VM under the VMs tab, with the following configuration (Screen Shot 2) : <domain type='kvm' xmlns:qemu='http://libvirt.org/schemas/domain/qemu/1.0'> <name>VirtualHelix</name> <uuid>a3cf9aa9-f5db-1476-7cae-2659900d1e52</uuid> <description>A virtual machine.</description> <metadata> <vmtemplate name="Custom" icon="ubuntu.png" os="ubuntu"/> </metadata> <memory unit='KiB'>2097152</memory> <currentMemory unit='KiB'>2097152</currentMemory> <memoryBacking> <nosharepages/> <locked/> </memoryBacking> <vcpu placement='static'>2</vcpu> <cputune> <vcpupin vcpu='0' cpuset='0'/> <vcpupin vcpu='1' cpuset='1'/> </cputune> <os> <type arch='x86_64' machine='pc-q35-2.3'>hvm</type> </os> <features> <acpi/> <apic/> </features> <cpu> <topology sockets='1' cores='2' threads='1'/> </cpu> <clock offset='utc'> <timer name='rtc' tickpolicy='catchup'/> <timer name='pit' tickpolicy='delay'/> <timer name='hpet' present='no'/> </clock> <on_poweroff>destroy</on_poweroff> <on_reboot>restart</on_reboot> <on_crash>restart</on_crash> <devices> <emulator>/usr/bin/qemu-system-x86_64</emulator> <disk type='file' device='disk'> <driver name='qemu' type='raw' cache='writeback'/> <source file='/mnt/disks/virtual/filesys/VirtualHelix/vdisk1.img'/> <target dev='hdb' bus='virtio'/> <boot order='1'/> <address type='pci' domain='0x0000' bus='0x02' slot='0x05' function='0x0'/> </disk> <disk type='file' device='cdrom'> <driver name='qemu' type='raw'/> <source file='/mnt/disks/virtual/iso/kodibuntu-14.0-helix_amd64.iso'/> <target dev='hda' bus='sata'/> <readonly/> <boot order='2'/> <address type='drive' controller='0' bus='0' target='0' unit='0'/> </disk> <controller type='usb' index='0' model='ich9-ehci1'> <address type='pci' domain='0x0000' bus='0x02' slot='0x03' function='0x7'/> </controller> <controller type='usb' index='0' model='ich9-uhci1'> <master startport='0'/> <address type='pci' domain='0x0000' bus='0x02' slot='0x03' function='0x0' multifunction='on'/> </controller> <controller type='sata' index='0'> <address type='pci' domain='0x0000' bus='0x00' slot='0x1f' function='0x2'/> </controller> <controller type='pci' index='0' model='pcie-root'/> <controller type='pci' index='1' model='dmi-to-pci-bridge'> <address type='pci' domain='0x0000' bus='0x00' slot='0x1e' function='0x0'/> </controller> <controller type='pci' index='2' model='pci-bridge'> <address type='pci' domain='0x0000' bus='0x01' slot='0x01' function='0x0'/> </controller> <controller type='virtio-serial' index='0'> <address type='pci' domain='0x0000' bus='0x02' slot='0x04' function='0x0'/> </controller> <filesystem type='mount' accessmode='passthrough'> <source dir='/mnt/user/test/'/> <target dir='shared'/> <address type='pci' domain='0x0000' bus='0x02' slot='0x01' function='0x0'/> </filesystem> <interface type='bridge'> <mac address='52:54:00:c3:c0:43'/> <source bridge='br0'/> <model type='virtio'/> <address type='pci' domain='0x0000' bus='0x02' slot='0x02' function='0x0'/> </interface> <serial type='pty'> <target port='0'/> </serial> <console type='pty'> <target type='serial' port='0'/> </console> <channel type='unix'> <source mode='bind' path='/var/lib/libvirt/qemu/channel/target/VirtualHelix.org.qemu.guest_agent.0'/> <target type='virtio' name='org.qemu.guest_agent.0'/> <address type='virtio-serial' controller='0' bus='0' port='1'/> </channel> <memballoon model='virtio'> <address type='pci' domain='0x0000' bus='0x02' slot='0x06' function='0x0'/> </memballoon> </devices> <qemu:commandline> <qemu:arg value='-device'/> <qemu:arg value='ioh3420,bus=pcie.0,addr=1c.0,multifunction=on,port=2,chassis=1,id=root.1'/> <qemu:arg value='-device'/> <qemu:arg value='vfio-pci,host=01:00.0,bus=pcie.0,multifunction=on,x-vga=on'/> <qemu:arg value='-device'/> <qemu:arg value='vfio-pci,host=01:00.1,bus=pcie.0'/> </qemu:commandline> </domain> When using OVMF, I get a blank screen (no light, nothing...) but keyboard control appears to be removed from the unRAID host. When using SeaBIOS, I get the Kodibuntu install screen appear on the appropriate graphics card, but the USB keyboard does not respond (and appears to have been removed from the host also). Any suggestions? I'd really like to get this VM up an running ASAP
  7. I just realised that this has occurred for me as well. I don't have any VM's enabled, but I am booting with Xen (without any images configured).
  8. So I've configured all the above in WebGrabPlusPlus.... But I don't seem to get any file generated in the data folder. I have logging set to "on" in WGPP, but it's not generating any logs (there is only one log from last night when it wasn't configured correctly). How do I force WGPP to do it's thing so I can check the log output?
  9. I know it doesn't exactly answer your question, but I thought I would echo the sentiments NAS expressed earlier on RAM economy. My initial rig had a stack of apps and 4GB of RAM, but would grind / stutter a bit under heavy load (it's now running 8GB without a hitch). As a contrast, the new rig I'm toying with runs a Core i5, 16GB RAM and the following docker apps : Plex (w/ Transcoding in Ram) Headless XBMC Sabnzbd SickRage CouchPotato Headphones TVHeadEnd Maraschino Transmission WebGrab++ DUC I'm serving up HD streams to 3-4 devices simultaneously, *while* running PAR2 checks, unZIP/unRAR operations and downloading new media streams @ 2-3Mbps in the background. All of this runs as smooth as butter, using only 3-10% CPU on average. Grab every bit of RAM you can afford early on.... it makes a considerable difference when running a number of apps. You'll always end up adding more apps than you originally intended
  10. I'm having a crack at setting up WebGrabberPlusPlus with TVHeadEnd and a couple of HDHomeRuns. TVHeadEnd is recognising my HDHR and scanning the channels (Major win! - Woohoo!) However, I'm a little lost as far as configuring WebGrabberPlusPlus goes. Has the WebGrab++.config.xml file been pre-configured in some way, or do I need to modify that myself? EG. The "Filename" attribute is currently set to "C:\ProgramData\ServerCare\WebGrab\guide.xml", should I change this to reflect the path I entered on the docker config? (like "/data/config.xml") Or is this automagically managed some other way? I can also see that the package includes the SiteINI pack... do I need to do anything special to configure this for an AU grabber?
  11. Saarg has created on over here : http://lime-technology.com/forum/index.php?topic=37671.0 I'm in the middle of having a crack at setting up my HDHomeRun right now. Give it a try and let him know how you went.
  12. I imagine it should work without a hitch. A day or so ago, I used your docker config file and changed the repository name from needo/sickrage to adamrbell/sickrage and that worked for me. If you've mirrored the code change Adam made, it should work for everyone else too. Can anyone confirm? (I'm away from my install at the moment or I'd try it myself)
  13. Yes - I discovered that you have the drivers installed after checking your docker file in github. Your question was on the right path. As the HDHomeRun tuner is a network device, it connects on a specific port (although I'm not sure exactly which one). I switched the docker app to "host" mode, which then enabled it to recognise the HDHomeRun tuners I should probably work out which port it connects on and switch it back to bridge mode at some point. Right now I'm busy trying to work out the WebGrab++ config to see if I can get TVHeadEnd up and running For the moment, I can confirm it recognises the HDHomeRun tuners and enables a channel / mux scan to be completed. I'll post more details once I have it all up and running
  14. I think this addresses the issue : https://github.com/adamrbell/sickrage It seems that SickRage have a new repository on GitHub.
  15. ChaOConnor, as the owner of this thread, are you able to change it's title? If so, would you consider changing it to "TVHeadEnd PVR Docker for use with Kodi"? It might make it easier for others to find the thread
  16. I found that it didn't work for me initially either. I was clicking on the Docker Icon and selecting "WebUI" - I suspect that you might be doing the same thing. Try going to http://[YourServerIP]:9981 If this works and you can see the TVHeadEnd GUI, then you can make a simple adjustment to your docker container config to set it up correctly. To adjust the container config : Select the "Docker" tab in the unRAID GUI, then click on the TVHeadEnd icon, then select the "Edit" option from the drop down menu. A modal window will then open showing the docker "container config". Move your mouse to the top right hand corner of the modal window, a button labelled "advanced" will appear, allowing you to click on it. Once the "advanced" button has been clicked, you will see additional fields in the "container config" window which were previously hidden. In the field labelled "WebUI", add : http://[YourServerIP]:9981 In the field labelled "Icon", add : https://avatars0.githubusercontent.com/u/1908588?v=3&s=400 (This will add a spiffy icon) Click "Apply" Let me know if that works for you
  17. Seems like saarg is having a crack at putting this together over here : http://lime-technology.com/forum/index.php?topic=37465.0 He would probably appreciate people testing it out and providing him with feedback
  18. Yeah - I've just updated the container and still no dice From what I understand, TVHeadEnd should show the adaptors... *but* it requires the libhdhomerun software to be installed first. These are the posts that I've read up on : https://tvheadend.org/projects/tvheadend/wiki/HDHomerun/5 https://tvheadend.org/boards/4/topics/14822 Any chance that you could try adding the drivers to the docker image?
  19. Ok - it seems that I can now get to the TVHeadEnd UI, which is a great step forward But how do I configure my HDHomeRun's here? I'm not seeing anything under Configuration --> TV Inputs --> TV Adaptors. I have two HDHomeRun devices on my network, but they don't seem to be appearing and I don't have an option to "add" them? P.S. You should consider creating a Docker template repo for this, adding an icon and configuring the "WebUI" link to open to the appropriate page
  20. Just gave this a crack and it doesn't seem to like the username / password (admin/password)?
  21. Confirmed Anyone considering a Plextor M.2 SSD will need to read the post mentioned above.
  22. Interestingly, I've found that the drive shows up when VT-d is disabled in the BIOS. Seems like it might be related to the Marvell controller and the ID's it provides to Xen, as per this post : http://lime-technology.com/forum/index.php?topic=33511.0
  23. Hi all, I've just installed a shiny new Plextor PCIe M.2 2280 SSD on the M.2 mount for a ASROCK Z97 Extreme4 Mobo. The drive appears to be working : 1. The flash screen indicates it's connecting successfully via PCIe x2 2. Drive details are showing up in the MB BIOS/UEFI settings screen However it does not appear in unRAID v6b12 (existing system). Has anyone else used a M.2 slot? Is there any reason that this drive would not be showing up?