You are a genius! It didnt like my values so i tried some other values and now it works! Thanks for your help!
Maybe it would be good if those errors displayed on the cli would appear in the gui.
If i click revert it resets the values. Also if i open the sensor config. Then the values are 700, 500, 300 (in the "ipmi-sensors.config" file).
Yes that is what i thought the mainboard never gets the actual settings from the file. Is there an easy work around?
Thanks for the quick reply. Yes of course i saved my config
I have "UNRAID Version 6.3.5".
root@UNRAID:/boot/config/plugins/ipmi# cat fan.cfg
FANCONTROL="disable"
FANPOLL="3"
FANIP=""
IPMIBOARD=""
I can see that the config is updated but the errors are still comming.
I have tested it with lower than 300 RPM with the same result.
I hope you have enough information now. If you need something else just say it.
(btw. i'm a unraid and ipmi noobie as you probably noticed )
ipmi-sensors.config.txt
First of all, great plugin! Thanks for your work.
Second: i have a little problem with my Supermicro X11 board. It doesn't want to save my fan threshold configuration.
Am i doing something wrong?
Thanks for your help.