greg2895

I do have mcelog installed on my machine: cron for user root /usr/bin/run-parts /etc/cron.daily 1> /dev/null sh: -c: line 0: unexpected EOF while looking for matching ``' sh: -c: line 1: syntax error: unexpected end of file

Get the Fix Common Problems plugin and run in troubleshooting mode.

None of my VMs that are set to use br0 appear to be getting my default gateway 192.168.1.1. I'm not sure if I have something configured wrong. It worked fine in the past and then suddenly stopped working. Any advise would be great. VM xml file: <mac address='52:54:00:bd:36:ab'/> <source bridge='br0'/> <model type='virtio'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x03' function='0x0'/> </interface>

Writing to the cache with multiple ssds or an nvme drive is the only way you will see close to 10gbit speeds. Most likely what you are seeing is the transfer caching to ram in the beginning and then slows down when using the array. Try out iperf3 to check out your network link speeds.

If rc17 was the last version you had before 6.4 you can roll back. Just pop the USB stick in another computer and copy the contents in the folder named previous to the root of the drive. I suggest making a copy of the drive before doing this.

My windows VM is telling me that it can not get a valid ip address nor will a static address at 192.168.1.x work when I assign br0 to the VM. Is the routing table correct? What else should I look for?

I have found no difference with raid 10 and raid 1 with my 4 ssds.

After the last 2 updates I have not been able to get my container to run. Nothing else has changed to my knowledge besides the update. I am getting the following from my log: cont-init.d] 10-adduser: exited 0.[cont-init.d] 20-config: executing...[cont-init.d] 20-config: exited 0.[cont-init.d] 30-keygen: executing...using keys found in /config/keys[cont-init.d] 30-keygen: exited 0.[cont-init.d] 50-config: executing...2048 bit DH parameters presentSUBDOMAINS entered, processingOnly subdomains, no URL in certSub-domains processed are: -d xxxxxxxxx.comE-mail address entered: xxxxxxxxx.comDifferent sub/domains entered than what was used before. Revoking and deleting existing certificate, and an updated one will be createdusage:certbot [SUBCOMMAND] [options] [-d DOMAIN] [-d DOMAIN] ...Certbot can obtain and install HTTPS/TLS/SSL certificates. By default,it will attempt to use a webserver both for obtaining and installing thecertificate.certbot: error: argument --cert-path: No such file or directoryGenerating new certificateSaving debug log to /var/log/letsencrypt/letsencrypt.logPlugins selected: Authenticator standalone, Installer NoneObtaining a new certificatePerforming the following challenges:Client with the currently selected authenticator does not support any combination of challenges that will satisfy the CA.Client with the currently selected authenticator does not support any combination of challenges that will satisfy the CA.IMPORTANT NOTES:- Your account credentials have been saved in your Certbotconfiguration directory at /etc/letsencrypt. You should make asecure backup of this folder now. This configuration directory willalso contain certificates and private keys obtained by Certbot somaking regular backups of this folder is ideal.ERROR: Cert does not exist! Please see the validation error above. The issue may be due to incorrect dns or port forwarding settings. Please fix your settings and recreate the container[cont-finish.d] executing container finish scripts...[cont-finish.d] done.[s6-finish] syncing disks.[s6-finish] sending all processes the TERM signal.[s6-finish] sending all processes the KILL signal and exiting.

I have had this issue for months now. 10gbe transfer speeds are under 350mb/s. Both server and client show 10gb links. I have tried the following and saw no changes: Removed the switch and used p2p, different 10gb Nic on client(made it even worse 200mb/s), server direct I/O, jumbo frames 9000 on server and client, transmit and receive buffer sizes. I have been using iperf3 to remove storage bottle necks. Server has 4 ssds in raid 10 with build in 10gbe Nic and the client has an nvme ssd with an Asus and also tried an intel 10gbe nic. Is there anything else I can try that I am forgetting?

Run memtest to see if you get any errors.

You are doing better than me! Im getting 300mb windows to unraid and about 400mb unraid to windows. I also setup a p2p connection to bypass the switch and nothing changed.

I still haven't solved my issue either. Transferring from an nvme drive to 2 samsung 850 pro ssds in raid 0. Iperf3 shows bandwidth around 3gbit. MTU 9014 is enabled on both sides.

That's awesome, worked great. Thanks

Turned out to be an issue with my network switch. Quick reboot of the switch fixed the issue. Uggh...