[Setting Up WireGuard® on Unraid]

Hey there, I'm having issues getting the WireGuard figured out as well.  

 

I have Unraid Server 1 (192.168.33.x) and Unraid Server 2 (192.168.1.x) and two different locations.  I want to map a share from Server 2 on Server 1 so that I can run remote backups (back up Server 1 files TO a share on Server 2).

 

I have WireGuard configured per the screenshot below AND the connection is good - handshake transmits data, if I hit the ping button I get a reply.

 

So now what?  If I try to map a share using Unassigned devices it can't find anything even when specifying the IP.  Is there something else I'm supposed to do?

[Unraid Phone Home to another Unraid?]

Thanks, @Ford Prefect.  From Server 1's terminal I am able to ping the IP wireguard set up for Server 2, but that seems to be all I can do with it. When I try to mount a network share with my unassigned devices plugin it doesn't see the drives on the other end. I'll check out that other forum page.

[Unraid Phone Home to another Unraid?]

Thanks @Ford Prefect!

 

I didn't have any luck with the OpenVPN-client plugin - keep getting errors and then I read on the forum it might be OBE since wireguard is built-in now.  Taking your advice.

 

So I got wireguard working, I think...It does a handshake and according to the status page data is being exchanged, but I can't see Server 2 from Server 1.  Tried adding a share by server name or the wireguard local IP and no luck.  I currently have it set to Remote Tunneled.  Or do I want LAN-to-LAN?

 

I really want to see Server 2 from my local network at home, too.

 

 

[Unraid Phone Home to another Unraid?]

My primary Unraid server ('Unraid Server 1') is happy here at home. 

 

I have reverse proxy with delugevpn, swag, dynamic dns, OpenVPN-as server, nextcloud, bidwarden, etc. and everything works as SpaceInvadorOne taught me in the videos.  When I'm remote I can open up my laptop and run OpenVPN and connect to my home network from anywhere and my mapped shares on 'Unraid Server 1' connect just fine just like if I was sitting at home.  Super cool!!

 

I recently upgraded the drives in 'Unraid Server 1' and thought it would be neat to slap the old drives in a spare rig and now I have 'Unraid Server 2'. 

 

My father lives about an hour away, has a fast FiOS pipe, and graciously offered to let me set up Server 2 there so I can use as a remote backup server of my critical non-media files.  

 

All of the VPN forum posts, youtube videos, etc. that I can find show setting up Unraid as a server (like how I have 'Unraid Server 1' configured). 

 

BUT, I want 'Unraid Server 2' to be plugged in my Dad's home network and visible like it's on my home network.  I DO NOT want to see his stuff on my home network.  I'd prefer not to mess with his router.

 

How can I set up 'Unraid Server 2' as a VPN Client where it'll just seamlessly phone home to my Server 1?  

 

Ideally, I want to be able to map a share located on Server 2 (remote) that Server 1 (and any of my local network PCs) will see and I can send regular backups to of my critical documents, etc. using Duplicati or something similar.

[[Support] Data-Monkey - netdata]

I really like the new Netdata cloud feature, I sign in, claimed my node and ran the script they provide for dockers.  I get an automatic update and now that claimed node is unreachable and I have to go through the process, over, and over, and over.  How can I configure Netdata so it's name persists so I can get updates but also keep it sync'd with their cloud?

[Upgraded Cache Drive, Now Unmountable]

So I originally had two 120GB SSD and one 500GB M2 in a pool.  I followed procedure above and replaced one of the 120s with a new 500GB SSD I was given.

 

So that made my new cache the 500GB M2, the 120GB SSD, and the new 500GB SSD.  When I started the array Unraid (6.8.3) reported the remaining 120GB was now unmountable.  

 

I went ahead and stopped the array, changed the 120GB SSD's slot to None (removing it from the pool since it wasn't mountable anyway), and then started the array.  Things are happy now with just my two 500GBs.  All of my dockers are back, etc.

 

So I thought that you could upgrade any single device with a bigger one, but the system seemed to not like having that 3rd significantly smaller SSD, despite it being part of the original pool.

 

I'm glad everything is working again, but I'm curious why this all happened/what went wrong.  Any insights?

[Upgraded Cache Drive, Now Unmountable]

Hi folks, I followed the steps on this post: 

I stopped the array, selected the new 500 SSD to replace one of my old 120s, started the array.  The stop button greyed out, I waited a while while it rebuilt, and then the stop button became selectable again when it was done.  So that it calculated the new size I stopped and started the array again.  Now that I've done that my Cache pool says it's unmountable.  Doesn't make sense they were all btrfs.

 

How do I fix this?  I followed the steps.  I need all my data (plex library, etc.)  Thanks!

 

 

 

[[Support] Data-Monkey - netdata]

Every single day when I check for updates, NetData comes up as having an update.  Sometimes 2x a day.  Are updates really being published for this app this frequently?  The last post on this forum was early June...so I'm wondering if I've just been updating over itself over and over this whole time???

[[support] limetech's docker repository]

My Plex is still 1.16.0.1226 as of today and no update appears to be available.  My DVR functionality and Live TV is non-functional.  1.16.3.1402 is now released.  When is the next version from Limetech being released and what version will it be?

[[Plugin] IPMI for unRAID 6.1+]

Hey, I'm running 6.3.5 installed your plugin from the app mart.  Not seeing it listed on my plugins page.  Nor when I go to Settings/IPMI is anything loading.  Help!