JonesCKevin

This doesn't appear to solve the issue in 6.8.3 Is there any update?

New Update and Probably Final Update: I as many SAS cables to my on board SATA ports which is 6 of my 8 drives. I did this to alleviate the chances of CRC errors during the repair. I did the mentioned above to have disk one start the repair again. Just as an extra measure in case heat is an issue I did place a giant fan on my case which kept all my drives at 26 Degrees Celsius as well. Everything appears to be up and running now.

Small Update: Just an update to the progress so far. I decided to wait on the Firmware update to try and get the drives up and running first. So far this may not be the best method as other drives get 1 error at a random time in the rebuild, which causes those drives to disable. My next step will probably to just change the port the drives are on to SATA instead of the card until it is repaired.

Okay Rog. Ill look into the firmware update then do the mentioned above. Thanks for the assistance, Ill reply back here when I have some results or questions.

I am just curious if it should be mdcmd set invalidslot 2 29 since it's disk 2 that isn't set

Roger that, To confirm before I break something, invalid slot command: mdcmd set invalidslot 2

Hey Guys, Over the weekend, my 10TB Red data drive started getting errors and disabled itself. I did a check on it and it passed, so I set it to no device and re-enabled it to start the rebuild. During the rebuild my 4TB Data drive got a single error and disabled itself. I feel I am in a pickle here. What should I do? I am not overly sure what I am looking at or for in the diag zip. tower-diagnostics-20191223-0828.zip

Thx Guys. I'll do some research on this topic

Possible solution found. Not sure if this is the actual solution though. I was trying to work out the issue after looking at both replies. There are probably other factors involved. What I did was: - Add the Unassigned Device Shares (/mnt/disks/192.168.0.100_PlexMedia) - Remove the Plex server without removing image - Removed my Grafana dockers that I was working on. - Go to Apps - Search for binhex plexpass - This is the one I use - Installed as default ( I did add Host Path 2 as /mnt/user/PlexMedia but I don't think this part is relevant)[This is still set as Read/Write) - Name: Host Path 2 - Container Path: /mnt/disks/192.168.0.100_PlexMedia - Host Path: /mnt/user/PlexMedia - Access Mode: Read/Write - I logged into Plex web gui - Went to my empty Library that was already made - Edit - Add folders - Browse for media folder - Click 192.168.0.100_PlexMedia (which finally showed my subfolders and click the one I needed) - Add - Save Changes - Scan Library files and it started re-adding them in Attached is my Post-Fix Tower Diagnostics Now to find out why Pi-Hole isn't registering my nodes. Update: Still no idea why it wasn't working but I deleted the container without deleting the image. changed appdata to .old and reinstalled from scratch. Changed to a different IP and it worked. tower-diagnostics-20180805-1849.zip

I think I may slightly undereducated on UnAssigned Devices. And I may be lost with Unassigned Devices. Once I create an SMB / NFS or create a new - Access Mode is not an option I have added a picture of one of the transfer rates moving to a different folder. (Everything counts when troubleshooting)

Hey Squid, So I created the /mnt/disks/192.168.0.100_Plexmedia share created with Unassigned devices and added it a Host Path. As well I removed /MNT/USER/PLEXMEDIA as a host path. Results: 192.168.0.100_Plexmedia shows up in the Libray options with no subfolders to choose from Result L2: The share /mnt/User/PlexMedia has been removed from the Library Options - Scan to update makes no changes. (Re-adding the /mnt/user/PlexMedia does the same and shows no subfolders- It use to) Something I did try was to create a new Share and adding some footage to that folder and changing the media destination to that folder. This made all the files disappear with no results showing up in the library. Switching back does not bring them back. It feels like there is something internally wrong. I dont mind spending the hours to almost start from scratch but I did .old the Docker image and create a new set, this did not affect anything and continued to not work. PS. PiHole doesn't seem to work with no changes to the Docker. Does not register clients. It worked before this whole flash drive and Ram change.

Hey MrBilky, From your example, I do not use a Cache drive so that may not affect me?

I did reinstall that docker from scratch and the data is showing up again. However when I try to play or edit something it gives me this error: Please check that the file exists and the necessary drive is mounted. I did try to add Host Path 1 to the share folder but it did not make any changes.

Hey MrBilky, I just tried it and it failed. I did check to see if the appdata folder was there and it does exist. root@localhost:# /usr/local/emhttp/plugins/dynamix.docker.manager/scripts/docker run -d --name='Plex2' --net='host' -e TZ="America/Los_Angeles" -e HOST_OS="unRAID" -e 'TRANS_DIR'='/config/transcode' -e 'UMASK'='000' -e 'PUID'='99' -e 'PGID'='100' -v '/mnt/user':'/media':'rw' -v '/mnt/user/Docker/PlexMediaServer/Library/Application Support/Plex Media Server/Plug-ins/':'\\192.168.0.100\Docker\PlexMediaServer\Library\Application Support\Plex Media Server\Plug-ins\':'rw' -v '/mnt/user/PlexMedia/':'/mnt/user/PlexMedia/':'rw' -v '/mnt/user/appdata/binhex-plexpass':'/config':'rw' 'binhex/arch-plexpass' /usr/bin/docker: Error response from daemon: invalid bind mount spec "/mnt/user/Docker/PlexMediaServer/Library/Application Support/Plex Media Server/Plug-ins/:\\192.168.0.100\Docker\PlexMediaServer\Library\Application Support\Plex Media Server\Plug-ins\:rw": invalid volume specification: '/mnt/user/Docker/PlexMediaServer/Library/Application Support/Plex Media Server/Plug-ins/:\192.168.0.100DockerPlexMediaServerLibraryApplication SupportPlex Media ServerPlug-ins:rw': invalid mount config for type "bind": invalid mount path: '\192.168.0.100DockerPlexMediaServerLibraryApplication SupportPlex Media ServerPlug-ins' mount path must be absolute. See '/usr/bin/docker run --help'. The command failed.

Hey guys, Short point: Plex disappeared off my docker list randomly. When I tried to recover it using a current AppData folder, everything shows but can't connect. Long Point: It started when my computer would shut down all the time. Normally only when I am home. I assumed the dog would touch the machine and shock it to shut down. It turns out there was a bad RAM stick. Once I took the bad ram stick out I got some errors which would not let me boot the machine. After some tricks and such I remade a new flash drive and converted my GUID as well as Copied my config folder. This seemed to work fine on my shares, dockers, and everything really. Currently, most of the dockers appear fine when one and work. They open, show nothing different. However, the plex was fine too. It ran and I watched. Then about 2 days in it drops off the face of the planet. So I add a new container using the AppData folder which seemed to fix it but once I go to play something it would say to make sure the files haven't been renamed or moved. Moving ahead in time, the folders do not show the cached files anymore (I did delete the AppData folder in hopes to start from scratch). So currently I have an empty Plex that won't recognize the shared Videos folders. It just comes up empty when I do a scan. Share name EG: /MNT/USER/PLEXMEDIA /Movies /Tv Shows tower-diagnostics-20180804-0730.zip