Jump to content

Ak1rA

Members
  • Posts

    10
  • Joined

  • Last visited

Posts posted by Ak1rA

  1. Hello,

    I have 2 1gbps ethernet onboard:
    OMMU group 12:[10ec:8168] 03:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller (rev 06)

    IOMMU group 13:[10ec:8168] 04:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller (rev 06)

    and 1 usb 2.5gbps:
    Bus 004 Device 002 Port 4-3ID 0bda:8156 Realtek Semiconductor Corp. USB 10/100/1G/2.5G LAN

    on settings I have only eth0 (2.5gbps)

     

    I would like to dedicate 1 of 1gbps on my Home Assistant VM....

    can you explain me to enable the other ports?

    thanks!

    unraid-diagnostics-20230423-2302.zip

  2. Hi,

    I'm using a Realtek Semiconductor Corp. USB 10/100/1G/2.5G LAN RTL8156 USB 3.0 without any problems for months.

    After update to 6.11.3 the ethernet doens't work. I need to rollback to 6.9.2.

    I searched a solution and I found this thread:
     


    but I'm not safe to mod without a official fix...

     

    let me know If you have an easy solution (a walkthrough 😉)

     

    Thanks.

     

  3. @kubed_zero

    this is my results
     

    smartctl --nocheck standby -A /dev/sde
    smartctl 7.1 2019-12-30 r5022 [x86_64-linux-4.19.107-Unraid] (local build)
    Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org
    
    Device is in STANDBY mode, exit(2)

    and
     

    smartctl -A /dev/sde
    smartctl 7.1 2019-12-30 r5022 [x86_64-linux-4.19.107-Unraid] (local build)
    Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org
    
    === START OF READ SMART DATA SECTION ===
    SMART Attributes Data Structure revision number: 16
    Vendor Specific SMART Attributes with Thresholds:
    ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
    ..cut..
    194 Temperature_Celsius     0x0002   181   181   000    Old_age   Always       -       33 (Min/Max 22/61)
    ..cut..

    and If I repeat the first command:

     

    Quote
    
    smartctl -A /dev/sde
    smartctl 7.1 2019-12-30 r5022 [x86_64-linux-4.19.107-Unraid] (local build)
    Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org
    
    === START OF READ SMART DATA SECTION ===
    SMART Attributes Data Structure revision number: 16
    Vendor Specific SMART Attributes with Thresholds:
    ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
    ..cut..
    194 Temperature_Celsius     0x0002   181   181   000    Old_age   Always       -       33 (Min/Max 22/61)
    ..cut..

     

    but the hdd is spin-down status

     

    image.thumb.png.ce47d7334c20c3c7a568cb31bc067da3.png

  4. Thanks @kubed_zero for the update but I unistalled the plug-in e reinstalled, rebooted but I have the "-2" problem 

     

    @unRAID:~# snmpwalk -v 2c -c public localhost NET-SNMP-EXTEND-MIB::nsExtendOutLine
    NET-SNMP-EXTEND-MIB::nsExtendOutLine."disktemp".1 = STRING: HGST_HUS726040ALA610_K4H96V2B: -2
    NET-SNMP-EXTEND-MIB::nsExtendOutLine."disktemp".2 = STRING: HITACHI_HUA723020ALA640_YFHRL73A: -2
    NET-SNMP-EXTEND-MIB::nsExtendOutLine."disktemp".3 = STRING: HGST_HUS726040ALA610_K4K3J2EB: -2
    NET-SNMP-EXTEND-MIB::nsExtendOutLine."disktemp".4 = STRING: Hitachi_HUA723020ALA640_MK0171YFHRXSEA: -2
    NET-SNMP-EXTEND-MIB::nsExtendOutLine."disktemp".5 = STRING: Hitachi_HUA723020ALA640_MK0171YFHRW22A: -2
    NET-SNMP-EXTEND-MIB::nsExtendOutLine."disktemp".6 = STRING: ST1000DM003-1CH162_Z1DAYNTQ: -2
    NET-SNMP-EXTEND-MIB::nsExtendOutLine."disktemp".7 = STRING: WDC_WD10EFRX-68PJCN0_WD-WCC4JJHFK0C9: -2

    ..sigh..

×
×
  • Create New...