crazystar

Members
  • Posts

    10
  • Joined

  • Last visited

Everything posted by crazystar

  1. Hey, I am looking to buy the same board...wondering if you could share the IOMMU groups. Thanks!
  2. I tried and couldn’t get it work. SMB for whatever reason was always bound to the main Interface and I couldn’t get it to use the LAGG interface.
  3. No. Apparently you can’t change from the default interface.
  4. Confirmed! Downgraded my LSI-9207-8e from P20_IT to P16_IT and fstrim worked great. I am running 4x860 EVOs in a BTRFS array as my cache pool. Thanks to whoever that found the solution
  5. Hi all, I am having quite a few issues with my instance of Unraid. I tried going the diagnostics dump but I dont think I am savvy enough to find the issue. I have attached diag report, I would appreciate if someone could help me through troubleshooting. Thanks rangoonnas-diagnostics-20190205-1008.zip
  6. Hello all, I have 4 network interfaces out of which 1 interface is in Management VLAN and the other three are bonded via LACP. I would like to bind the samba service to the bonded interface. I added the following to the SMB extra conf page but doesn't seem to be working. bind interfaces only = yes interfaces = lo br1 Tried bond1 and br1, both did not work. Any advice? Thanks
  7. So I looked the CRC error count and it looks like the counter is going up for drives in one of the SA120s. I will replace that cable and report back. Btw, is there anyway to clear these counts?
  8. Looks like the devices are all in SA120s...I guess I buy the SF-8088 cables now?
  9. Hello all, I am running quite a few disks in an R710 hooked up to two SA120s(daisy chained using SF-8088 cables). I am getting quite a few CRC errors...after reading through the forum, it looks like a data cable issue(?). Now these cables cost $25 each so before I drop $50 trying to debug, is there anything else I can do to narrow down the issue? Any help is appreciated. Thanks rangoonmediasrv-diagnostics-20180715-2100.zip