Fodder

Members
  • Posts

    52
  • Joined

  • Last visited

Everything posted by Fodder

  1. thanks, working on a computer to put unraid on now.
  2. Hi Garycase yes that is the program. I thought the program was a bit odd, of the directories it could read, it seemed to copy all the files. but when i checked on them they all had a 0k value. The only reason i new about the directories being protected was because of using Ubuntu, so not really sure of what is going on. hmmm. i have another box i could use...... I didnt know that i could do that, i thought i would have have all the drives. But now thinking about it i could use the OLD USB and a new config? a new config wont wipe the data on the disks? Fod.
  3. Hi Everyone, I know this has been covered to some extent, but what is happening is a bit odd. Ok, the server its self was hit by a tree, yes hit by a tree. (a tree fell on the house dead under the cupboard that holds the unraid) very serious damage, parity drive lost (it was on the top) next drive down the connector is pretty mangled so it might be a loss also, but might not. Motherboard is dead and generally everything is a bad way...... (yes insurance is going to cover it, eventually.....) machine specs Unraid 6.0 (upgraded from 4-5-6, so still running ReiserFS) So background done, i brought a couple of 4TB drives, USB3 2bay drive holder thing to store and transfer the data off the damaged drives and here is my problem. when i access the drives (not the suspect ones) i am using a Ubuntu live CD (also tried disk internals prog for windows, but it did not even want to open the disks) and the USB3 HDD thing, but the directories in the disk are saying that i do not have sufficient privilege to access the file inside. I did not think that the access permissions were still in effect, i thought unraid controlled that. So how do i access these files? Fod
  4. Hi and thanks for your time. If you are referring toa differetn USB port, yes i have tried then all except for the port the UNRAID USB stick is in same result. (there was also a reboot in there just as a hail mary, hey i work in a windows world ) Any other ideas? Chris
  5. Hi ho everyone, after playing around with some VM's and randomly checking settings i notice that the UPS was not enabled. So i enabled it, then started getting communication lost errors. oh man, went back to the UPS settings page and sure enough its saying "communication lost" i have an APC UPS ES-550G and when i remove the USB lead and reinsert it i get -=-=-=-=-=- Dec 20 01:36:00 tower apcupsd[1014]: apcupsd 3.14.13 (02 February 2015) slackware startup succeeded Dec 20 01:36:00 tower apcupsd[1014]: NIS server startup succeeded Dec 20 01:36:40 tower kernel: usb 4-1: USB disconnect, device number 4 Dec 20 01:36:47 tower kernel: usb 4-1: new low-speed USB device number 5 using ohci-pci Dec 20 01:36:47 tower kernel: hid-generic 0003:051D:0002.0008: hiddev0,hidraw0: USB HID v1.10 Device [APC Back-UPS ES 550G FW:870.O3 .I USB FW:O3 ] on usb-0000:00:12.1-1/input0 Dec 20 01:37:00tower apcupsd[1014]: Communications with UPS lost. -=-=-=-=-=- Now this will have nothing to do with the VM's as they have been running etc, its just that what was what prompted me to be in teh main screen scheck etc. the settings on the UPS pge are attached, but are pretty standard APC UPS. Any idea where is should start? Chris
  6. Ok, so i think i have figured it out. This might be just me being dumb or not reading the instructions properly. So user TURL asked what i had in global share settings. it was set to all included and none excluded. well after a bit of playing around i figured out that you need to set these fields to disk 1, disk2 etc before you can set anything else to use a single disk. thanks for trying to help the noob
  7. Hi, a couple of them were needing an update, but that has made no difference. (I restarted the box just to be sure.)
  8. Hi All, sorry for the time delay, was on holidays-ISH! So i checked and I don't have any add blocking software installed in Firefox. Just to be sure i fired up IE and i get the same result. **edit: i also disabled antivirus etc to see if that was affecting it, no luck.** Anyone got any other ideas? (all my other shares are spread over all the drives, so i have not had need to try this before)
  9. Anyone got any idea as to why i cant seem to use a single disk for the Time Machine share.
  10. hi, i just had a look and it is set as follows included disks: all excluded disks: none
  11. Hi Everyone, So firstly i did have a search for the answers but i could not find this happening, so i am not sure if i am being stupid. And mainly this is the fault of the UNRAID software, it just works and i have had rarely touch it, so i am out of practice. I had an uptime of over a year until i had some warnings of drive failure (Parity drive) and then i had to add a new larger parity drive) Ahh first world problems, any way to my problem..... So i am trying to create a Time Machine share for the wife's mac I have done a lot of surfing and the info on this is a bit all over the place. (well at least o could not find a decent and V6 version of this) so as best i understand it: create a share with the following attributes: name as "TimeMachine" comment: time machine share allocation method: fillup min free: 0KB Split Level: Manual Included disks: (pick one) Excluded disks: ( i assume leave this empty if you only pick one disk above use cache: NO enable copy on write: No (i assume as we are only using one disk and and no cache drive. But it all falls apart at the included disk. It seems that when i try to create the share and i get to the section of the share that deals with "included drives" (default is 'all' you click on it, and pop up come up with what i know should be a list of drives), but there is nothing there. Some thing happens on the excluded drives section. Am i being dumb or is there something wrong here? I have included a screen grab. Again sorry if this is a stupid question, its unraids fault being to reliable and all Chris
  12. hi there, thanks for that info, I am reading the docs now. my setup only converted one file and then ignored anything that was added to the directory after that. I checked the logfile and it seemed like it was frozen as the log nothing. I am a bit of a noob and dont understand a few things, could you please clarify? background: while the torrent is downloading it is in a "new downloads" folder once downloaded it is moved to "completed downloads" this is the source directory for filebot (this is where the torrent engine seeds from as well) then when filebot is finished it moves the file to a directory on the server called 'videos' so: is this setup correct? (from what i can understand i think this will not work as the "completed downloads' folder never "settles" due to the seeding.) will filebot delete the original file? (or just the "crap" it creates to "filebot" the file) lastly, if the above setup is used will filebot ignore the files in the directory and only target the new downloads? or do i have to get a seperate input directory that only has the file to be 'filebot-ed' so it can be deleted. thanks.
  13. so an update, i logged into my unraid remotly and filebot has processed the files i downloaded. so it sems there is a delay in when it checks for new material to cleanup /extract. now i just have to figure out if the log saying it deleted the input file is true and if so how to stop it from doing that. i am sure that it will be a smple thing , ok i hope it will be a simple thing.
  14. Hi there, I have been using filebot for ages, but it was installed on my torrent machine. It worked well but due to having to use an old version of utorrent (tracker issues) utorrent would not call filebot properly. (copy the logger line into CMD window, poof, it works) So i was very happy to see the docker, thanks heaps! except it doesnt work for me :-( so it installed correctly, and one i started the docker i saw it run through the list of files (my "completed torrents" folder and exclude everything in there. I assume that this is a standard thing so it doesnt go and re-'filebot' everything in the folder. Clever if this is its intended purpose. But: that's all it does, then is just sits there. i downloaded a new torrent and it got moved by Utorrent to "completed torrents" and filebot is just siting there, not even seeing the file. there has to be a time period that it sleeps waiting for new content to appear in the directory, or is this a know issues and i have Noobed something? Thanks for the docker! --- snip ---- [Feb 21 14:11:59] Starting FileBot container [Feb 21 14:11:59] Comparing user's filebot.sh at version 2 versus current version 2 [Feb 21 14:11:59] Running FileBot on startup [Feb 21 14:11:59] User "user_99_100" already exists. Skipping creation of user and group... [Feb 21 14:11:59] Running command as user "user_99_100"... [Feb 21 14:11:59] FileBot: Starting monitor for /files/FileBot.conf [Feb 21 14:11:59] FileBot: Waiting for changes to /input... Locking /files/amc.log Run script [fn:amc] at [sun Feb 21 14:12:06 AEDT 2016] ((((( heaps of other lines etc ))))))) Read archive [pfa-gda.s03e06.rar] and extract to [/input/Grand.Designs.Australia.S03E06.DVDRip.x264-PFa/pfa-gda.s03e06/Grand.Designs.Australia.S03E06.DVDRip.x264-PFa] Skipped extracting files [/input/Grand.Designs.Australia.S03E06.DVDRip.x264-PFa/pfa-gda.s03e06/Grand.Designs.Australia.S03E06.DVDRip.x264-PFa/pfa-gda.s03e06.mkv] Read archive [pfa-gd.s05e02.rar] and extract to [/input/Grand.Designs.Australia.S05E02.DVDRip.x264-PFa/pfa-gd.s05e02/Grand.Designs.Australia.S05E02.DVDRip.x264-PFa] Skipped extracting files [/input/Grand.Designs.Australia.S05E02.DVDRip.x264-PFa/pfa-gd.s05e02/Grand.Designs.Australia.S05E02.DVDRip.x264-PFa/pfa-gd.s05e02.mkv] Read archive [pfa-gda.s04e06.rar] and extract to [/input/Grand.Designs.Australia.S04E06.DVDRip.x264-PFa/pfa-gda.s04e06/Grand.Designs.Australia.S04E06.DVDRip.x264-PFa] Skipped extracting files [/input/Grand.Designs.Australia.S04E06.DVDRip.x264-PFa/pfa-gda.s04e06/Grand.Designs.Australia.S04E06.DVDRip.x264-PFa/pfa-gda.s04e06.mkv] No files selected for processing Failure (°_°) ----- end snip ----- then from torrent machine times [2016-02-21 14:16:53] Moving files from 'T:\New downloads\The.100.S03E01.720p.HDTV.x264-KILLERS' to 'T:\Completed torrents\The.100.S03E01.720p.HDTV.x264-KILLERS'
  15. Hi All, I have the latest PLEX docker installed and i am running a RPi2 as a frontend with RASPLEX. Everything is working well, except randomly the RPi2 stops playing and says with red box in the corner "Media server went away" and the RPi2 loses connection to the PLEX docker. (also the RPi's menu displays just "search") this happens for about 10 seconds and then the menu updates and you can select things. Now this is a little annoying, but when this happens and the menu comes back you can click on the show you were watch and i starts back up in the same spot. so the wife is not completely losing her mind..... I dug around in the logs of PLEX docker to find the following -=-=-=- SNIP -=-=-=-=-= Aug 10, 2015 20:02:14 [0x2b3d82708700] DEBUG - Request: [192.168.2.109:50046] GET /library/parts/1916/file.mkv (4 live) Aug 10, 2015 20:02:14 [0x2b3d82708700] DEBUG - Request range: 344223767 to 0 Aug 10, 2015 20:02:14 [0x2b3d82708700] DEBUG - Content-Length of /media/TV Shows/Grand Designs Australia/Season 05/Grand Designs Australia - S05E07 - Williamstown Bluestone Cottage.mkv is 344461549. Aug 10, 2015 20:02:14 [0x2b3d7c401700] ERROR - Error writing media: 104 - Connection reset by peer Aug 10, 2015 20:02:14 [0x2b3d7c401700] DEBUG - Completed: [192.168.2.109:50045] GET /library/parts/1916/file.mkv (4 live) 2208ms 3524432 bytes 200 Aug 10, 2015 20:02:14 [0x2b3d83a00700] DEBUG - Request: [192.168.2.109:50020] GET /:/timeline?containerKey=%2fplayQueues%2f125&duration=2952960&guid=com.plexapp.agents.thetvdb%3a%2f%2f196901%2f5%2f7%3flang%3den&key=%2flibrary%2fmetadata%2f2044&playQueueItemID=125&playQueueVersion=1&ratingKey=2044&state=playing&time=2910249 (3 live) Aug 10, 2015 20:02:14 [0x2b3d83a00700] DEBUG - Client [816e5f12-873a-418d-80ce-fd7c4467107f] reporting timeline state playing, progress of 2910249/2952960ms for guid=com.plexapp.agents.thetvdb://196901/5/7?lang=en, ratingKey=2044 url=, key=/library/metadata/2044, containerKey=/playQueues/125, metadataId=2044 Aug 10, 2015 20:02:14 [0x2b3d83a00700] DEBUG - [Now] Device is Plex Home Theater (RasPlex). -=-=-=-= SNIP -=-=-=-=- So i know this can be caused by anything, but as i have transitioned to the PLEX docker and this was not happening before i am looking at the PLEX docker first. RASPLEX is saying the server goes away, so i need to prove that it doesn't before i go to RASPLEX forum to start asking questions. I have no idea were else to get logs to prove /disprove this. Anyone got any ideas?
  16. Hi All, thanks for the replys, but as i said (but did not expand on) the upgrade feature in V6-beta-15 does not work for me. I have tried several time to use the upgrade button, both with and without teh dockers running to no avail. I have take syslogs before, after the upgrade is complete and the after reboot and scanned them with no luck. although i am not an expert mind. so manual upgrade it is. bonienl, & itimpi thanks for the Tip, i read that guide seve3ral times when upgrading from V5(beta something or other) to V6. I was able to upgrade with out incident, awesome work on that guide!. but in this case i will just copy the bzroot/bzimage and see how i go. FOD
  17. Thanks for taking the time to reply. I am at V6-beta-15 not version 5. so V6-beta-15 to v6.0.1 Fod.
  18. Hi everyone, Ok, so the 'upgrade button' in plugins is not working. so a manual process is required. download 6.0.1 and unzip. take backup of working v6beat15 then what files are needed for this type of upgrade? is it just the ' bzimage' file i need to copy over from the downloaded 6.0.1 to the USB ? Fod
  19. RIGHT O, Will backup USB etc and give it another go and grab the syslog, prob over the weekend. Fod.
  20. hi everyone, So, in the "plugins" section there is an entry for limetech and that allows you to upgrade the unraid install. (from v6 beta 15 to v6) is this supposed to work? as it doesn't for me, it goes through the process and says its complete, and asks you to reboot, but then the server will not boot. Further investigation show that the USB is still v6beta15. Now i am not sure if the USB was reverted or it just failed all over. One thing i did notice while it was running the script to upgrade was that the script used the 'make bootable_mac' script. (i dont know if its suppose to use that?) to get the server back up i needed to re-run the 'make bootable' script and the server is back up and running with no issues that i can see. just notv6 if this is an unknown occurrence i will make a copy of the running USB and then retry grabbing syslog and anything else you would like. fod.
  21. ok, after removing the _9.2.0 version i installed the "current" version. that installed with no issues, then removed it image and all. then installed the 0.9.2 and it still will show the "context" menu. interesting.... FOD
  22. ok, i just removed the docker via the CMD line and then re-added the container with the same result. the docker loads and starts but you are unable to do anything to start or stop the docker (except via the CMD line). FOD.
  23. thanks Capt! i have installed it but i am thinking something went wrong. I am unable to 'click' on the rtorrent icon and get the context menu to start or stop it. (or uninstall it and try again) from watching the CMD line i think the right CMD is /usr/docker remove rutorrent_0.9.2 can you confirm? if i can get it to unload/remove i will try again and see if it is a problem again. FOD. EDIT: correct command is '/usr/bin/docker rm -f [torrent name]'
  24. Hi PhAzE, firstly thank you for all your work with these plugins, 128 pages of help! i am a longtime user of filebot on my torrenting machine (win7) and i am migrating that to my new v6 server with r torrent docker. i just cant figure out how to call filebot from rtorrent. in the winodws world i use "C:/Program Files/Filebot/filebot.exe" -script fn:amc --output "V:" --log-file amc.log --action copy --conflict override -non-strict --def plex=media-pc --def music=y artwork=n "ut_label=%L" "ut_title=%N" "ut_kind=%K" "ut_file=%F" "ut_dir=%D" which extrapolates to: "C:/Program Files/Filebot/filebot.exe" -script fn:amc --output "V:" --log-file amc.log --action copy --conflict override -non-strict --def plex=media-pc --def music=y artwork=n "ut_label=" "ut_title=Castle.2009.S07E22" "ut_kind=%K" "ut_file=" "ut_dir=T:\Completed torrents\Castle.2009.S07E22" that in turn is feed to the CMD line and filebot runs (well actually it doesn't its a know bug with utorrent version i have to run) so my question is now that i am moving from the windows world to linux what do you put in the "program to run" in your torrent client? does that make sense?
  25. yes that was it. set the share to cache only, stopped and started and zoneminder was stopped. but still there (had not set it to autostart) thanks!