lordvaderxiii

Hi All Im getting 100% CPU usage on Sonarr almost constantly. Does anyone know why? I have limited the sonarr docker to 4 cores to reduce the impact but not sure what to do. Radarr is doing the same thing. Here is a pic of the cpu usage

Hi @TRusselo New board has 6 sata ports on it. (New server will have 4x4TB and 2 x M.2 NVMe drives) No sas expander Do not want to use the old drives only new ones New board for reference

Hi Everyone Im going to be replacing my 12 year old server (had unraid for 2 years) with a completely new machine and new drives and I want to essentially duplicate what I have onto my new hardware. Im moving from an array of mostly 1TB drives (total 4.7TB) and 2 SSD cache drives (Im nearly out of space) to an array of 4TB drives (total 12TB) and 2 SSD cache drives. My array is 91% full. What is the best way to do this? Ideally I do not want the server to be down for long as it runs a lot of my home automation. Should I get the new hardware up and running with a trail licence and then move everything or do I follow the suggested answer in this thread? I would also like to replace the flash drive as I used a cheap one not thinking about it. I know you can do a flash move. Any suggestions would be great thanks.

Thanks Johnnie thats solved my issue. I spent most of the day on this and thats all that it needed. Haha.

Hi All Im having an issue with BTRFS, I have added a second cache drive and when I try to do the ballance it fails. with kernel: BTRFS error (device sdi1): balance: invalid convert metadata profile raid1 Ballance looks like this Data, single: total=25.00GiB, used=23.93GiB System, single: total=32.00MiB, used=16.00KiB Metadata, single: total=2.00GiB, used=53.83MiB GlobalReserve, single: total=16.00MiB, used=0.00B No balance found on '/mnt/cache' I ran -dconvert=single -mconvert=raid0 And then I tried it in the console and got [ 9856.213350] BTRFS error (device sdi1): balance: invalid convert data profile raid0 Here is what my drives look like tower-diagnostics-20190517-0616.zip

Im a complete idiot. This is because I put a number but not a G for gigabyte in the disk size.

So I tried the installer with Fedora and added a bunch of different drives all with different configurations. It looks like they show up but they only have 512bytes free on them. Anyone know why and how to fix this?

I have also tried putting the VM in another location and still cant see the disk. I have also tried the qcow2 vdisk

I have tried all of the options. Still no joy.

Hi Guys I cant seem to figure this out. Im very new to unraid and I have read through the help. I have an old machine using a Gigabyte GA-EX58-UD3R motherboard and in i7920. I am unable to turn on IOMMU When I boot ubuntu it works fine until install where it needs a drive. It cant see the drive. These are my settings for the VM below. But I have tried tons of variations. Can anyone help me here? I have virtulization on and I know this machine can run vms because I have used both hyper v and virtualbox in windows and virtualbox in Ubuntu server before moving to unraid.