linusgrip
-
Posts
18 -
Joined
Content Type
Profiles
Forums
Downloads
Store
Gallery
Bug Reports
Documentation
Landing
Posts posted by linusgrip
-
-
Got this error when trying to setup two_factor:
level=error msg="534 5.7.9 Application-specific password required.
Any idea?
EDIT:
Found solution, had to add "App Passwords" inside gmail and add that password in the config file for mail.
-
12 hours ago, mmwilson0 said:
Nope ☹️ Ive just powered off the freeipa VM for now. Need to revisit it and try again
Probably something we´ve overlooked I´ll let you know if i find a solution, would appreciate if you did the same. Maybe @Sycotix have some time over and takes a look
- 1
-
On 5/5/2021 at 5:54 AM, mmwilson0 said:
Hi, i'm following IBRACORP's videos on the configuring Authelia, and am hitting an issue similar to that reported by another user in this thread.
the file stanza starts on line 217
##Line 216 file: path: /config/users_database.yml password: algorithm: argon2id iterations: 1 key_length: 32 salt_length: 16 memory: 1024 parallelism: 8
and the obfuscated users_database.yml file
cat users_database.yml users: <username>: displayname: "<name>" password: "$argon2i$v=19$m=1024,t=1,p=<hash>" email: <email> groups: - admins - dev
Not quite sure whats going wrong. Please let me know if you have any thoughts!
Same problem as you, did you find any solution?
-
On 2/27/2021 at 5:03 PM, helpermonkey said:
Hi,
I'm having trouble accessing the GUI - the docker seems to start okay and I'm on Unraid 6.8.3. I'm not entirely sure what's going on but I grabbed this log off the Unraid docker GUI: https://pastebin.com/m1vRwqwC
Any suggestions?
Same problem as you, have been running binhex-sabnzbd for months but as of yesterday cant access GUI but the dockers works fine. Although are running it through binhex-delugeVPN (spaceinvaderon guide) and if i stop that i can access the GUI just fine.
Log from sabnzbd:
https://pastebin.com/RMsH2sPU- 1
-
On 5/11/2020 at 7:21 PM, thoughts4days said:
When I try initial install of UNRaid i get this error message.
Failed to Allocate memory for kernel command line, bailing out
Booting Kernel Failed: Bad File number.
Did you got this solved? Interested what was wrong.
-
You can also add another cache drive and have them in RAID1. That way you will see those share as protected. Or do as Delarius says and back all those share on the array. SpaceinvaderOne make good videos of this. Or total paranoia = 2 cachedrive RAID1 and backup those shares to array
https://www.youtube.com/watch?v=ij8AOEF1pTU
-
Ran last run now without any erros so i guess am golden then I´ll attach the log again if you got some time over to look over if i missed anything. Many thanks again johnnie!
-
I'll run another check. Download diagnos and then run another. Thanks johnnie for the support 😃 best thing about unraid, all the good ppl in the community.
-
Thing is i did a parity check with correcting and found 256 error. Then ran the memtest/cpu stress. After that another parity check and found exactly 256 error again.
-
Yes but what is best practice, complete rebuild of parity?
-
Hi!
Woke up one day and my unraid box had a unclean shutdown. After paritysync (with correction) it got 256 sync errors. Took everything offline and did memtest for 40hours with no errors and stressed the CPU for 12h with no problems. Don´t know if i had any poweroutage, (ordered a UPS yesterday....) replaced the SATA cables and turn her back up and did another parity check (with correction). Got same 256 errors. Could someone help we with this, can´t see any errors on disk, or not able to find in the log. Should i do a parity rebuild or is that stupid. Maybe preclear the parity drive and then rebuild if complete the preclear without errors.
Ofcourse i did not preclear any of my drives brefore installing them.... Lesson learn there.
System:
Hp Z800
Dual x5670
48GB ECC
LSI 9211-8i IT mode
3x 8TB WD RED (1 parity)
Samsung 500GB 860 evo cache drive
Attach the syslog and SMART of all the HDD drives.
All best!
// Linus
unraid-syslog-20190804-1821.zip unraid-smart-20190804-2040_Disk2.zip unraid-smart-20190804-2040_Parity.zip unraid-smart-20190804-2040_Disk1.zip
-
On 12/10/2017 at 6:21 AM, Limy said:
I can confirm that the LSI HBA 9305-16i works with unraid. All my ssd’s and hard disks are recognized.
I just built a server using it along with a Supermicro X11SSZ-TLN4F-O motherboard.
What about TRIM, does that work with that card?
-
On 3/4/2019 at 9:48 PM, Output said:
Upgrading my 2011 system I wanted to move to iGPU encode and decode for Plex. Also I wanted to get the latest chipset / cpu that’s for servers but not really a need for a Xeon cpu. Choice fell to the c246 chipset and that narrowed the boards down to Supermicro X11SCZ-F or the Asus WS C246 PRO. I really wanted a IPMI board since the board I’m replacing has IPMI. Reading about issues with IPMI and iGPU at the same time I dropped that requirement.
Speaking for the Asus board seemed to be the ability to use more lanes to the PCI slots by turning off 4 SATA ports and not having the SM fan controller. Since I have the x-case 420 PRO case it has an issue with the SM fan controller and the built-in fan controller in the case. Thus I choose the Asus board.
Specs:
Intel Core i7-8700K
Corsair Vengeance LPX Black 32GB (CMK32GX4M2A2666C16)
X-Case 420 PRO
2 IBM M1015 IT mode
3 SSD for cache
17 HDD
The board booted without a extra graphics card present both with the shipped bios and the latest bios version 0802. Both M1015 cards works too in slot 1 and 2, this seems important since the cards do not like 4x slots.
Unraid (6.6) does not find the fancontroller without adding modprobe -v nct6775 to the GO file. Adding that row and FAN1-7 can be controlled independently ( I think). Also iGPU enconding works like a charm.
IOMMU group 0: [8086:3ec2] 00:00.0 Host bridge: Intel Corporation 8th Gen Core Processor Host Bridge/DRAM Registers (rev 07)
IOMMU group 1: [8086:1901] 00:01.0 PCI bridge: Intel Corporation Xeon E3-1200 v5/E3-1500 v5/6th Gen Core Processor PCIe Controller (x16) (rev 07)
[8086:1905] 00:01.1 PCI bridge: Intel Corporation Xeon E3-1200 v5/E3-1500 v5/6th Gen Core Processor PCIe Controller (x8) (rev 07)
[1000:0072] 01:00.0 Serial Attached SCSI controller: LSI Logic / Symbios Logic SAS2008 PCI-Express Fusion-MPT SAS-2 [Falcon] (rev 03)
[1000:0072] 02:00.0 Serial Attached SCSI controller: LSI Logic / Symbios Logic SAS2008 PCI-Express Fusion-MPT SAS-2 [Falcon] (rev 03)
IOMMU group 2: [8086:3e92] 00:02.0 VGA compatible controller: Intel Corporation UHD Graphics 630 (Desktop)
IOMMU group 3: [8086:a36d] 00:14.0 USB controller: Intel Corporation Cannon Lake PCH USB 3.1 xHCI Host Controller (rev 10)
[8086:a36f] 00:14.2 RAM memory: Intel Corporation Cannon Lake PCH Shared SRAM (rev 10)
IOMMU group 4: [8086:a360] 00:16.0 Communication controller: Intel Corporation Cannon Lake PCH HECI Controller (rev 10)
IOMMU group 5: [8086:a352] 00:17.0 SATA controller: Intel Corporation Cannon Lake PCH SATA AHCI Controller (rev 10)
IOMMU group 6: [8086:a340] 00:1b.0 PCI bridge: Intel Corporation Cannon Lake PCH PCI Express Root Port #17 (rev f0)
IOMMU group 7: [8086:a338] 00:1c.0 PCI bridge: Intel Corporation Cannon Lake PCH PCI Express Root Port #1 (rev f0)
IOMMU group 8: [8086:a330] 00:1d.0 PCI bridge: Intel Corporation Cannon Lake PCH PCI Express Root Port #9 (rev f0)
IOMMU group 9: [8086:a332] 00:1d.2 PCI bridge: Intel Corporation Cannon Lake PCH PCI Express Root Port #11 (rev f0)
IOMMU group 10: [8086:a309] 00:1f.0 ISA bridge: Intel Corporation Device a309 (rev 10)
[8086:a323] 00:1f.4 SMBus: Intel Corporation Cannon Lake PCH SMBus Controller (rev 10)
[8086:a324] 00:1f.5 Serial bus controller [0c80]: Intel Corporation Cannon Lake PCH SPI Controller (rev 10)
[8086:15bb] 00:1f.6 Ethernet controller: Intel Corporation Ethernet Connection (7) I219-LM (rev 10)
IOMMU group 11: [8086:1533] 06:00.0 Ethernet controller: Intel Corporation I210 Gigabit Network Connection (rev 03)
Hi!
Thinking about buying Asus WS C246 PRO and xeon E-2146G, saw that you fixed the fan controller with the extra line of code in the go file. The server still going strong and the fan controller works?
Just to be on the safe side, this i my GO file:
#!/bin/bash
# Start the Management Utility
/usr/local/sbin/emhttp &
modprobe -v nct6775You just added the line like above?
All best!
// Linus
- 1
-
7 minutes ago, binhex said:
this is not correct:-
2019-03-27 17:09:38.628346 [info] VPN_OPTIONS defined as 'swiss.privateinternetaccess.com'
VPN_OPTIONS is used to define advanced openvpn options NOT the endpoint, this is controlled via the ovpn file that you copied to /config/openvpn/ which at present looking at your logs is the netherlands, if you want port forwarding working then do not use the netherlands (no longer supports port forwarding).
Thank you! Saved my day
-
Hi guys!
Trying to use VPN in deluge but keep getting this error when starting up the docker: Unrecognized option or missing or extra parameter(s) in [CMD-LINE]:1: auth-user-pass (2.4.6)
Using Privateinternetaccess via switzerland
Read throught this topic but could not make any sense of it... Not using any special character in id or password. Followed SpaceinvaderOne guide. I´ll link the sipervisord.log file and maybe someone can help me
All best!
// Linus
Authentik: How to Install with Docker and Why You Should
in Docker Containers
Posted
Great video but cant get the authentik-worker to connect to postgres. Followed the guide exactly. Gets this error in worker log:
{"event": "PostgreSQL connection successful", "level": "info", "logger": "__main__", "timestamp": 1663354077.5986426}
{"event": "PostgreSQL connection failed, retrying... (connection to server at \"postgres\" (172.18.0.12), port 5432 failed: FATAL: password authentication failed for user \"postgres\"\n)", "level": "info", "logger": "__main__", "timestamp": 1663354078.6033316}
Anyone got an idea? Removed every special character everywhere.
Thanks!