shelleys7801

I had a similar issue after updating.. I have mine set up using different paths then default in the docker Settings but noticed after updating that the paths had been changed without my input. Seems like new host paths are being used? I also rolled back to the previous version and used my old paths and everything worked again.

I had a cache pool of 2x512gb NVME drives but had two 500GB SATA SSDs laying around and decided to add them to the pool to create a 2TB cache. One of the SSDs balanced fine and was included into the total capacity (now reporting 1.5TB) however the other one never balances. It doesn't show any reads/writes during balancing, and it's capacity is never added to the pool. 2x 512GB Gammix S11 Pro NVME WD Blue 500GB SATA SSD --> balances and adds to the cache pool Crucial MX500 500GB SATA SSD --> never balances or adds to the cache pool I attached a picture showing what the pool/drives look like while balancing, as you can see 3 of the 4 drives are reading/writing whereas the the MX500 isn't. The total capacity is listed as 1.5TB. Once balancing finishes, the capacity remains at 1.5TB. Any writes to the cache following balancing are written to the others 3 drives, not to the MX500. Any ideas as to what's happening? I'm running 6.8.0rc-5 Edit: Ended up just removing my cache pool and starting from scratch, adding the MX500 first, verifying it was working as intended as a cache, and then adding the other three back. Now I have 2TB RAID0 cache pool.