PhantomAU

Did this and managed to get into the BIOS after flashing, no setting I could change, but it nice to see its accessible. I moved it over to my HP Microserver, imported my zpool and tada all working. I also installed the lsi megaraid tool under solaris and the card shows up no dramas. Now for the benchmarking

Yep that is exactly what happens

Another successfully flashed an IBM M1015 to IT mode. However I did have some problems at step 5. The version of the sas2flsh util kept giving me an error about no LSI adapter being found. eg: No LSI SAS adapters found! Limited Command Set Available! Finished Processing Commands Successfully. Exiting SAS2Flash. I was finally able to overcome it with one of the versions post/linked to: LSI Corporation SAS2 Flash Utility Version 10.00.00.00 (2011.05.13) Copyright (c) 2008-2011 LSI Corporation. All rights reserved I have been unable to get into the bios since flashing, but I was able to before...I think its a memory space problem as I'm running an intel raid 0 array on this computer and the intel storage matrix loads as well. FYI the adapter information before flashing: Adapter #0 ============================================================================== Versions ================ Product Name : ServeRAID M1015 SAS/SATA Controller Serial No : xxxxxxxx FW Package Build: 20.10.1-0036 Mfg. Data ================ Mfg. Date : 06/25/11 Rework Date : 00/00/00 Revision No : 02D Battery FRU : N/A Image Versions in Flash: ================ BIOS Version : 4.24.00_4.11.05.00_0x05020000 Preboot CLI Version: 03.02-015:#%00008 WebBIOS Version : 4.0-46-e_34-Rel NVDATA Version : 3.09.03-0017 FW Version : 2.120.54-1235 Boot Block Version : 2.02.00.00-0001 Pending Images in Flash ================ None PCI Info ================ Vendor Id : 1000 Device Id : 0073 SubVendorId : 1014 SubDeviceId : 03b1 SBR file attached. My computer info for mobo compatability: Intel Q9550 Quad cpu Asus P5Q Deluxe mobo (P45 chipset) Cheers Phantom M1015.zip