Hi all,
My server did its normal parity check the other day and is now saying it has errors. Can anyone tell me if the disk is ok or should i get it replaced.
smartctl 7.0 2018-12-30 r4883 [x86_64-linux-4.19.55-Unraid] (local build)
Copyright (C) 2002-18, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Western Digital Red
Device Model: WDC WD60EFRX-68MYMN1
Serial Number: WD-WX31D254PTD2
LU WWN Device Id: 5 0014ee 261498f93
Firmware Version: 82.00A82
User Capacity: 6,001,175,126,016 bytes [6.00 TB]
Sector Sizes: 512 bytes logical, 4096 bytes physical
Rotation Rate: 5700 rpm
Device is: In smartctl database [for details use: -P show]
ATA Version is: ACS-2, ACS-3 T13/2161-D revision 3b
SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is: Mon Sep 16 13:44:17 2019 BST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
AAM feature is: Unavailable
APM feature is: Unavailable
Rd look-ahead is: Enabled
Write cache is: Enabled
DSN feature is: Unavailable
ATA Security is: Disabled, frozen [SEC2]
Wt Cache Reorder: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
See vendor-specific Attribute list for marginal Attributes.
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 5024) seconds.
Offline data collection
capabilities: (0x7b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 703) minutes.
Conveyance self-test routine
recommended polling time: ( 5) minutes.
SCT capabilities: (0x303d) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
1 Raw_Read_Error_Rate POSR-K 200 001 051 Past 0
3 Spin_Up_Time POS--K 205 185 021 - 8708
4 Start_Stop_Count -O--CK 069 069 000 - 31223
5 Reallocated_Sector_Ct PO--CK 183 183 140 - 511
7 Seek_Error_Rate -OSR-K 100 253 000 - 0
9 Power_On_Hours -O--CK 063 063 000 - 27647
10 Spin_Retry_Count -O--CK 100 100 000 - 0
11 Calibration_Retry_Count -O--CK 100 100 000 - 0
12 Power_Cycle_Count -O--CK 100 100 000 - 101
192 Power-Off_Retract_Count -O--CK 200 200 000 - 64
193 Load_Cycle_Count -O--CK 189 189 000 - 34223
194 Temperature_Celsius -O---K 120 096 000 - 32
196 Reallocated_Event_Count -O--CK 140 140 000 - 60
197 Current_Pending_Sector -O--CK 200 200 000 - 0
198 Offline_Uncorrectable ----CK 100 253 000 - 0
199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0
200 Multi_Zone_Error_Rate ---R-- 200 200 000 - 1
||||||_ K auto-keep
|||||__ C event count
||||___ R error rate
|||____ S speed/performance
||_____ O updated online
|______ P prefailure warning
General Purpose Log Directory Version 1
SMART Log Directory Version 1 [multi-sector log support]
Address Access R/W Size Description
0x00 GPL,SL R/O 1 Log Directory
0x01 SL R/O 1 Summary SMART error log
0x02 SL R/O 5 Comprehensive SMART error log
0x03 GPL R/O 6 Ext. Comprehensive SMART error log
0x06 SL R/O 1 SMART self-test log
0x07 GPL R/O 1 Extended self-test log
0x09 SL R/W 1 Selective self-test log
0x10 GPL R/O 1 NCQ Command Error log
0x11 GPL R/O 1 SATA Phy Event Counters log
0x21 GPL R/O 1 Write stream error log
0x22 GPL R/O 1 Read stream error log
0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log
0x80-0x9f GPL,SL R/W 16 Host vendor specific log
0xa0-0xa7 GPL,SL VS 16 Device vendor specific log
0xa8-0xb6 GPL,SL VS 1 Device vendor specific log
0xb7 GPL,SL VS 40 Device vendor specific log
0xbd GPL,SL VS 1 Device vendor specific log
0xc0 GPL,SL VS 1 Device vendor specific log
0xc1 GPL VS 93 Device vendor specific log
0xe0 GPL,SL R/W 1 SCT Command/Status
0xe1 GPL,SL R/W 1 SCT Data Transfer
SMART Extended Comprehensive Error Log Version: 1 (6 sectors)
Device Error Count: 9554 (device log contains only the most recent 24 errors)
CR = Command Register
FEATR = Features Register
COUNT = Count (was: Sector Count) Register
LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8
LH = LBA High (was: Cylinder High) Register ] LBA
LM = LBA Mid (was: Cylinder Low) Register ] Register
LL = LBA Low (was: Sector Number) Register ]
DV = Device (was: Device/Head) Register
DC = Device Control Register
ER = Error register
ST = Status register
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 9554 [1] occurred at disk power-on lifetime: 27629 hours (1151 days + 5 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 05 40 00 01 c8 a4 5d d8 e0 00 Error: UNC 1344 sectors at LBA = 0x1c8a45dd8 = 7661182424
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
25 00 00 05 40 00 01 c8 a4 5a 70 e0 08 2d+02:33:44.890 READ DMA EXT
35 00 00 05 40 00 01 c8 a4 4f f0 e0 08 2d+02:33:44.887 WRITE DMA EXT
25 00 00 05 40 00 01 c8 a4 55 30 e0 08 2d+02:33:44.862 READ DMA EXT
ef 00 10 00 02 00 00 00 00 00 00 a0 08 2d+02:33:44.861 SET FEATURES [Enable SATA feature]
27 00 00 00 00 00 00 00 00 00 00 e0 08 2d+02:33:44.861 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
Error 9553 [0] occurred at disk power-on lifetime: 27629 hours (1151 days + 5 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 05 40 00 01 c8 a4 53 28 e0 00 Error: UNC 1344 sectors at LBA = 0x1c8a45328 = 7661179688
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
25 00 00 05 40 00 01 c8 a4 4f f0 e0 08 2d+02:33:40.773 READ DMA EXT
25 00 00 01 80 00 01 c8 a4 4e 70 e0 08 2d+02:33:40.754 READ DMA EXT
25 00 00 05 40 00 01 c8 a4 49 30 e0 08 2d+02:33:40.741 READ DMA EXT
35 00 00 05 40 00 01 c8 a4 3d 30 e0 08 2d+02:33:40.739 WRITE DMA EXT
25 00 00 01 80 00 01 c8 a4 47 b0 e0 08 2d+02:33:39.833 READ DMA EXT
Error 9552 [23] occurred at disk power-on lifetime: 27629 hours (1151 days + 5 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 05 40 00 01 c8 a4 3d d0 e0 00 Error: UNC 1344 sectors at LBA = 0x1c8a43dd0 = 7661174224
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
25 00 00 05 40 00 01 c8 a4 3d 30 e0 08 2d+02:33:35.839 READ DMA EXT
25 00 00 01 80 00 01 c8 a4 3b b0 e0 08 2d+02:33:35.838 READ DMA EXT
25 00 00 05 40 00 01 c8 a4 36 70 e0 08 2d+02:33:35.836 READ DMA EXT
35 00 00 05 40 00 01 c8 a4 2f b0 e0 08 2d+02:33:35.834 WRITE DMA EXT
35 00 00 00 40 00 00 e9 63 bc 60 e0 08 2d+02:33:35.834 WRITE DMA EXT
Error 9551 [22] occurred at disk power-on lifetime: 27629 hours (1151 days + 5 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 05 40 00 01 c8 a4 33 20 e0 00 Error: UNC 1344 sectors at LBA = 0x1c8a43320 = 7661171488
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
25 00 00 05 40 00 01 c8 a4 2f b0 e0 08 2d+02:33:31.653 READ DMA EXT
35 00 00 05 40 00 01 c8 a4 25 30 e0 08 2d+02:33:31.651 WRITE DMA EXT
25 00 00 00 40 00 00 e9 63 bc 60 e0 08 2d+02:33:31.651 READ DMA EXT
25 00 00 05 40 00 00 e9 63 b7 20 e0 08 2d+02:33:31.647 READ DMA EXT
25 00 00 05 40 00 00 e9 63 b1 e0 e0 08 2d+02:33:31.643 READ DMA EXT
Error 9550 [21] occurred at disk power-on lifetime: 27629 hours (1151 days + 5 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 05 40 00 01 c8 a4 28 70 e0 00 Error: UNC 1344 sectors at LBA = 0x1c8a42870 = 7661168752
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
25 00 00 05 40 00 01 c8 a4 25 30 e0 08 2d+02:33:27.400 READ DMA EXT
25 00 00 00 20 00 00 e8 e4 48 88 e0 08 2d+02:33:27.385 READ DMA EXT
35 00 00 01 80 00 01 c8 a4 1d 80 e0 08 2d+02:33:27.384 WRITE DMA EXT
25 00 00 00 f0 00 01 c8 a4 24 40 e0 08 2d+02:33:27.383 READ DMA EXT
25 00 00 05 40 00 01 c8 a4 1f 00 e0 08 2d+02:33:27.360 READ DMA EXT
Error 9549 [20] occurred at disk power-on lifetime: 27629 hours (1151 days + 5 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 01 80 00 01 c8 a4 1d c8 e0 00 Error: UNC 384 sectors at LBA = 0x1c8a41dc8 = 7661166024
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
25 00 00 01 80 00 01 c8 a4 1d 80 e0 08 2d+02:33:23.276 READ DMA EXT
25 00 00 05 40 00 01 c8 a4 18 40 e0 08 2d+02:33:23.273 READ DMA EXT
35 00 00 05 40 00 01 c8 a4 10 30 e0 08 2d+02:33:23.271 WRITE DMA EXT
25 00 00 02 d0 00 01 c8 a4 15 70 e0 08 2d+02:33:23.101 READ DMA EXT
ef 00 10 00 02 00 00 00 00 00 00 a0 08 2d+02:33:23.101 SET FEATURES [Enable SATA feature]
Error 9548 [19] occurred at disk power-on lifetime: 27629 hours (1151 days + 5 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 05 40 00 01 c8 a4 13 18 e0 00 Error: UNC 1344 sectors at LBA = 0x1c8a41318 = 7661163288
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
25 00 00 05 40 00 01 c8 a4 10 30 e0 08 2d+02:33:19.210 READ DMA EXT
25 00 00 01 80 00 01 c8 a4 0e b0 e0 08 2d+02:33:19.204 READ DMA EXT
25 00 00 05 40 00 01 c8 a4 09 70 e0 08 2d+02:33:19.200 READ DMA EXT
35 00 00 05 40 00 01 c8 a3 fd 70 e0 08 2d+02:33:19.199 WRITE DMA EXT
25 00 00 01 80 00 01 c8 a4 07 f0 e0 08 2d+02:33:15.513 READ DMA EXT
Error 9547 [18] occurred at disk power-on lifetime: 27629 hours (1151 days + 5 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 05 40 00 01 c8 a3 fd b8 e0 00 Error: UNC 1344 sectors at LBA = 0x1c8a3fdb8 = 7661157816
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
25 00 00 05 40 00 01 c8 a3 fd 70 e0 08 2d+02:33:11.706 READ DMA EXT
35 00 00 05 40 00 00 e9 63 a6 e0 e0 08 2d+02:33:11.701 WRITE DMA EXT
35 00 00 05 40 00 00 e9 63 a1 a0 e0 08 2d+02:33:11.697 WRITE DMA EXT
35 00 00 05 40 00 00 e9 63 9c 60 e0 08 2d+02:33:11.523 WRITE DMA EXT
35 00 00 03 c0 00 00 e9 63 62 80 e0 08 2d+02:33:11.522 WRITE DMA EXT
SMART Extended Self-test Log Version: 1 (1 sectors)
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Short offline Completed without error 00% 27642 -
# 2 Extended offline Completed: read failure 30% 27529 7661155080
# 3 Short offline Completed without error 00% 27522 -
# 4 Short offline Completed without error 00% 27198 -
# 5 Conveyance offline Completed: unknown failure 90% 24926 -
# 6 Conveyance offline Completed: unknown failure 90% 24926 -
# 7 Conveyance offline Completed: read failure 90% 24785 4193056
# 8 Extended offline Completed: read failure 90% 24781 4193040
# 9 Short offline Completed: read failure 20% 24781 4193040
#10 Short offline Completed without error 00% 9 -
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
SCT Status Version: 3
SCT Version (vendor specific): 258 (0x0102)
Device State: Active (0)
Current Temperature: 32 Celsius
Power Cycle Min/Max Temperature: 28/35 Celsius
Lifetime Min/Max Temperature: 2/56 Celsius
Under/Over Temperature Limit Count: 0/0
Vendor specific:
00 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
SCT Temperature History Version: 2
Temperature Sampling Period: 1 minute
Temperature Logging Interval: 1 minute
Min/Max recommended Temperature: 0/60 Celsius
Min/Max Temperature Limit: -41/85 Celsius
Temperature History Size (Index): 478 (116)
Index Estimated Time Temperature Celsius
117 2019-09-16 05:47 28 *********
... ..( 18 skipped). .. *********
136 2019-09-16 06:06 28 *********
137 2019-09-16 06:07 29 **********
... ..( 16 skipped). .. **********
154 2019-09-16 06:24 29 **********
155 2019-09-16 06:25 28 *********
... ..( 16 skipped). .. *********
172 2019-09-16 06:42 28 *********
173 2019-09-16 06:43 29 **********
... ..( 16 skipped). .. **********
190 2019-09-16 07:00 29 **********
191 2019-09-16 07:01 30 ***********
... ..( 19 skipped). .. ***********
211 2019-09-16 07:21 30 ***********
212 2019-09-16 07:22 31 ************
213 2019-09-16 07:23 30 ***********
... ..( 22 skipped). .. ***********
236 2019-09-16 07:46 30 ***********
237 2019-09-16 07:47 29 **********
... ..( 21 skipped). .. **********
259 2019-09-16 08:09 29 **********
260 2019-09-16 08:10 30 ***********
... ..( 36 skipped). .. ***********
297 2019-09-16 08:47 30 ***********
298 2019-09-16 08:48 29 **********
... ..( 20 skipped). .. **********
319 2019-09-16 09:09 29 **********
320 2019-09-16 09:10 30 ***********
... ..( 38 skipped). .. ***********
359 2019-09-16 09:49 30 ***********
360 2019-09-16 09:50 29 **********
... ..( 7 skipped). .. **********
368 2019-09-16 09:58 29 **********
369 2019-09-16 09:59 30 ***********
370 2019-09-16 10:00 29 **********
... ..( 2 skipped). .. **********
373 2019-09-16 10:03 29 **********
374 2019-09-16 10:04 30 ***********
... ..( 8 skipped). .. ***********
383 2019-09-16 10:13 30 ***********
384 2019-09-16 10:14 31 ************
... ..( 22 skipped). .. ************
407 2019-09-16 10:37 31 ************
408 2019-09-16 10:38 32 *************
... ..( 51 skipped). .. *************
460 2019-09-16 11:30 32 *************
461 2019-09-16 11:31 31 ************
... ..( 4 skipped). .. ************
466 2019-09-16 11:36 31 ************
467 2019-09-16 11:37 30 ***********
... ..( 12 skipped). .. ***********
2 2019-09-16 11:50 30 ***********
3 2019-09-16 11:51 29 **********
... ..( 25 skipped). .. **********
29 2019-09-16 12:17 29 **********
30 2019-09-16 12:18 30 ***********
... ..( 24 skipped). .. ***********
55 2019-09-16 12:43 30 ***********
56 2019-09-16 12:44 29 **********
... ..( 40 skipped). .. **********
97 2019-09-16 13:25 29 **********
98 2019-09-16 13:26 28 *********
... ..( 17 skipped). .. *********
116 2019-09-16 13:44 28 *********
SCT Error Recovery Control:
Read: 70 (7.0 seconds)
Write: 70 (7.0 seconds)
Device Statistics (GP/SMART Log 0x04) not supported
Pending Defects log (GP Log 0x0c) not supported
SATA Phy Event Counters (GP Log 0x11)
ID Size Value Description
0x0001 2 0 Command failed due to ICRC error
0x0002 2 0 R_ERR response for data FIS
0x0003 2 0 R_ERR response for device-to-host data FIS
0x0004 2 0 R_ERR response for host-to-device data FIS
0x0005 2 0 R_ERR response for non-data FIS
0x0006 2 0 R_ERR response for device-to-host non-data FIS
0x0007 2 0 R_ERR response for host-to-device non-data FIS
0x0008 2 0 Device-to-host non-data FIS retries
0x0009 2 2 Transition from drive PhyRdy to drive PhyNRdy
0x000a 2 4 Device-to-host register FISes sent due to a COMRESET
0x000b 2 0 CRC errors within host-to-device FIS
0x000f 2 0 R_ERR response for host-to-device data FIS, CRC
0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC
0x8000 4 246674 Vendor specific
WDC_WD60EFRX-68MYMN1_WD-WX31D254PTD2-20190916-1344.txt