resakse

Hi, I just upgraded from 6.04 (i think) to 6.14, then I os reported that my cpu/mb doesnt have vt-d capabilities anymore. So I lost all my vms any tips? thanks! silencio-diagnostics-20151127-2147.zip

yes, I was running unraid on my esxi before using unraid 6. But any idea how to fix this?

hi, I just upgraded and now my kvm doesnt work. root@Silencio:~# modprobe kvm_intel modprobe: ERROR: could not insert 'kvm_intel': Operation not supported root@Silencio:~# modprobe kvm_amd modprobe: ERROR: could not insert 'kvm_amd': Operation not supported root@Silencio:~# dmesg | grep kvm kvm: no hardware support kvm: no hardware support kvm: no hardware support kvm: no hardware support kvm: no hardware support kvm: no hardware support root@Silencio:~# cat /proc/cpuinfo processor : 0 vendor_id : GenuineIntel cpu family : 6 model : 58 model name : Intel(R) Xeon(R) CPU E3-1230 V2 @ 3.30GHz stepping : 9 microcode : 0x15 cpu MHz : 3292.616 cache size : 8192 KB physical id : 0 siblings : 8 core id : 0 cpu cores : 4 apicid : 0 initial apicid : 0 fpu : yes fpu_exception : yes cpuid level : 13 wp : yes flags : fpu de tsc msr pae mce cx8 apic sep mca cmov pat clflush acpi mmx fxsr sse sse2 ss ht syscall nx lm constant_tsc rep_good nopl nonstop_tsc eagerfpu pni pclmulqdq monitor est ssse3 cx16 sse4_1 sse4_2 popcnt tsc_deadline_timer aes xsave avx f16c rdrand hypervisor lahf_lm ida arat epb pln pts dtherm fsgsbase erms xsaveopt bugs : bogomips : 6585.23 clflush size : 64 cache_alignment : 64 address sizes : 36 bits physical, 48 bits virtual power management: Model: N/A M/B: ASRock - H77 Pro4/MVP CPU: Intel® Xeon® CPU E3-1230 V2 @ 3.30GHz HVM: Not Available IOMMU: Not Available Cache: 1024 kB, 256 kB, 8192 kB Memory: 16384 MB (max. installable capacity 32 GB) Network: bond0: fault-tolerance (active-backup) eth0: 1000Mb/s - Full Duplex eth1: not connected eth2: not connected Kernel: Linux 4.1.13-unRAID x86_64 OpenSSL: 1.0.1p Uptime: i'm quite sure my cpu and m/b have vt-d support even though theres no vmx in that cpu flag somehow.. Now I lost my ftp and webserver.

sorry, was outstation and can't check my unraid box. My drive passed short self test, waiting for extended self test result for the moment..

root@Silencio:/boot/config# dd if=/dev/sdi count=195 | od -c -A d | sed 30q 0+0 records in 0+0 records out 0 bytes (0 B) copied0000000 , 5.9648e-05 s, 0.0 kB/s root@Silencio:/boot/config# Smart Log: smartctl 6.2 2013-07-26 r3841 [x86_64-linux-3.18.5-unRAID] (local build) Copyright © 2002-13, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Device Model: ST3000VN000-1HJ166 Serial Number: W73011GP LU WWN Device Id: 5 000c50 0781dca3e Firmware Version: SC60 User Capacity: 3,000,592,982,016 bytes [3.00 TB] Sector Sizes: 512 bytes logical, 4096 bytes physical Rotation Rate: 5900 rpm Device is: Not in smartctl database [for details use: -P showall] ATA Version is: ACS-2, ACS-3 T13/2161-D revision 3b SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Sat Apr 4 17:45:02 2015 SGT SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 107) seconds. Offline data collection capabilities: (0x73) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. No Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 388) minutes. Conveyance self-test routine recommended polling time: ( 2) minutes. SCT capabilities: (0x10bd) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 10 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x000f 100 100 006 Pre-fail Always - 26736 3 Spin_Up_Time 0x0003 100 100 000 Pre-fail Always - 0 4 Start_Stop_Count 0x0032 100 100 020 Old_age Always - 1 5 Reallocated_Sector_Ct 0x0033 100 100 010 Pre-fail Always - 0 7 Seek_Error_Rate 0x000f 100 253 030 Pre-fail Always - 7 9 Power_On_Hours 0x0032 100 100 000 Old_age Always - 0 10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0 12 Power_Cycle_Count 0x0032 100 100 020 Old_age Always - 1 184 End-to-End_Error 0x0032 100 100 099 Old_age Always - 0 187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 0 188 Command_Timeout 0x0032 100 253 000 Old_age Always - 0 189 High_Fly_Writes 0x003a 100 100 000 Old_age Always - 0 190 Airflow_Temperature_Cel 0x0022 070 069 045 Old_age Always - 30 (Min/Max 26/31) 191 G-Sense_Error_Rate 0x0032 100 100 000 Old_age Always - 0 192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 0 193 Load_Cycle_Count 0x0032 100 100 000 Old_age Always - 1 194 Temperature_Celsius 0x0022 030 040 000 Old_age Always - 30 (0 26 0 0 0) 197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 0 198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x003e 200 253 000 Old_age Always - 0 SMART Error Log Version: 1 No Errors Logged SMART Self-test log structure revision number 1 No self-tests have been logged. [To run self-tests, use: smartctl -t] SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay.

================================================================== 1.15 = unRAID server Pre-Clear disk /dev/sdi = cycle 1 of 1, partition start on sector 1 = Disk Pre-Clear-Read completed DONE = Step 1 of 10 - Copying zeros to first 2048k bytes DONE = Step 2 of 10 - Copying zeros to remainder of disk to clear it DONE = Step 3 of 10 - Disk is now cleared from MBR onward. DONE = Step 4 of 10 - Clearing MBR bytes for partition 2,3 & 4 DONE = Step 5 of 10 - Clearing MBR code area DONE = Step 6 of 10 - Setting MBR signature bytes DONE = Step 7 of 10 - Setting partition 1 to precleared state DONE = Step 8 of 10 - Notifying kernel we changed the partitioning DONE = Step 9 of 10 - Creating the /dev/disk/by* entries DONE = Step 10 of 10 - Verifying if the MBR is cleared. DONE = Elapsed Time: 8:15:51 ========================================================================1.15 == == SORRY: Disk /dev/sdi MBR could NOT be precleared == == out4= 00000 == out5= 00000 ============================================================================ 0+0 records in 0+0 records out 0 bytes (0 B) copied, 0.000130407 s, 0.0 kB/s 0000000 I bought 3 Seagate N000, preclear -A all of them gave the same results. I'm using Unraid 6 beta 14. But I can format and put them in my array without any problem.. Should I be worry? edited : its 3TB Seagate NAS

hi, can you tell me how did you do this? I also got problem with both my pcie asmedia and onboard controller pantherpoint disappear when I pass through that onboard controller. Right now, I only passthrough both asmedia controller and need to rdm those hdd on pantherpoint (onboard sata). I'm using esxi 5.0u3 btw..

I'm using 10GbE networking.

an easier solution is to ssh tunnel. I dont know about iphone, but I can access my plex server fine using my android tablet and macbook. yes, dyndns is stopping their free servis but you can use no-ip.org or afraid.org

got this on your package manager?

connection refused means that either your unraid dont open that port (openssh is not installed) or firewall blocking. Have you try look at the unmenu package again? it seems that openssh package wont be re-install upon reboot without some tweak.

I'm using latest unraid 5.05 with 3GB ram, xeon 1230v2 processor as guest on esxi this is my syslog : Apr 6 13:06:31 Silencio kernel: sdc: sdc1 Apr 6 13:06:31 Silencio ata_id[4007]: HDIO_GET_IDENTITY failed for '/dev/sdc' Apr 6 13:17:44 Silencio emhttp: shcmd (33): /usr/local/sbin/emhttp_event stopping_svcs Apr 6 13:17:44 Silencio emhttp_event: stopping_svcs Apr 6 13:17:44 Silencio emhttp: Stop AVAHI... Apr 6 13:17:44 Silencio emhttp: shcmd (34): /etc/rc.d/rc.avahidaemon stop |& logger Apr 6 13:17:44 Silencio logger: Stopping Avahi mDNS/DNS-SD Daemon: stopped Apr 6 13:17:44 Silencio kernel: mdcmd (35): nocheck Apr 6 13:17:44 Silencio kernel: md: nocheck_array: check not active Apr 6 13:17:44 Silencio avahi-daemon[3872]: Got SIGTERM, quitting. Apr 6 13:17:44 Silencio avahi-daemon[3872]: Leaving mDNS multicast group on interface eth0.IPv4 with address 192.168.20.16. Apr 6 13:17:44 Silencio avahi-dnsconfd[3889]: read(): EOF Apr 6 13:17:44 Silencio avahi-daemon[3872]: avahi-daemon 0.6.31 exiting. Apr 6 13:17:44 Silencio emhttp: shcmd (35): /etc/rc.d/rc.avahidnsconfd stop |& logger Apr 6 13:17:44 Silencio logger: Stopping Avahi mDNS/DNS-SD DNS Server Configuration Daemon: stopped Apr 6 13:17:44 Silencio emhttp: shcmd (36): ps axc | grep -q rpc.mountd Apr 6 13:17:44 Silencio emhttp: Stop NFS... Apr 6 13:17:44 Silencio emhttp: shcmd (37): /etc/rc.d/rc.nfsd stop |& logger Apr 6 13:17:44 Silencio mountd[3857]: Caught signal 15, un-registering and exiting. Apr 6 13:17:45 Silencio emhttp: Stop SMB... Apr 6 13:17:45 Silencio emhttp: shcmd (38): /etc/rc.d/rc.samba stop |& logger Apr 6 13:17:45 Silencio kernel: nfsd: last server has exited, flushing export cache Apr 6 13:17:45 Silencio emhttp: shcmd (39): rm /etc/avahi/services/smb.service &> /dev/null Apr 6 13:17:45 Silencio emhttp: Spinning up all drives... Apr 6 13:17:45 Silencio kernel: mdcmd (36): spinup 1 Apr 6 13:17:45 Silencio kernel: mdcmd (37): spinup 2 Apr 6 13:17:46 Silencio emhttp: Sync filesystems... Apr 6 13:17:46 Silencio emhttp: shcmd (40): sync Apr 6 13:19:38 Silencio unmenu[2139]: which: no bwm-ng in (/bin:/sbin:/usr/bin:/usr/sbin) Apr 6 13:19:41 Silencio kernel: NTFS driver 2.1.30 [Flags: R/W MODULE]. Apr 6 13:25:44 Silencio sshd[18292]: Accepted password for root from 192.168.20.11 port 54951 ssh2 Apr 6 13:25:44 Silencio sshd[18320]: lastlog_filetype: Couldn't stat /var/log/lastlog: No such file or directory a file or directory!ncio sshd[18320]: lastlog_openseek: /var/log/lastlog is not --More-- Apr 6 13:25:44 Silencio sshd[18320]: lastlog_filetype: Couldn't stat /var/log/lastlog: No such file or directory Apr 6 13:25:44 Silencio sshd[18320]: lastlog_openseek: /var/log/lastlog is not a file or directory! Apr 6 13:33:01 Silencio kernel: mdcmd (38): spinup 0 Apr 6 13:33:01 Silencio kernel: Apr 6 13:33:01 Silencio kernel: mdcmd (39): spinup 1 Apr 6 13:33:01 Silencio kernel: Apr 6 13:33:01 Silencio kernel: mdcmd (40): spinup 2 Apr 6 13:33:01 Silencio kernel: Apr 6 13:36:08 Silencio emhttp: unRAID System Management Utility version 5.0.5 Apr 6 13:36:08 Silencio emhttp: Copyright (C) 2005-2013, Lime Technology, LLC Apr 6 13:36:08 Silencio emhttp: get_config_idx: fopen /boot/config/flash.cfg: No such file or directory - assigning defaults Apr 6 13:36:08 Silencio emhttp: diskFsStatus.1 not found Apr 6 13:36:08 Silencio kernel: emhttp[20524]: segfault at 0 ip 40233760 sp bfc48e80 error 4 in libc-2.11.1.so[401ba000+15c000] I got no cache drive, no parity atm. I'm in the middle of preclearing 3 drives, 1 of them just complete. So I decided to stop the array and add that drives to the array so I can move some more files. But after I stop the array, both dynamix and unmenu just hang. I stopped the array many times yesterday while configuring shares but no such crash happened. The different today is that I setup nfs shares. root@Silencio:/var/log# ps ax | more PID TTY STAT TIME COMMAND 1 ? Ss 0:03 init 2 ? S 0:00 [kthreadd] 3 ? S 2:12 [ksoftirqd/0] 5 ? S< 0:00 [kworker/0:0H] 6 ? S 0:00 [kworker/u:0] 7 ? S< 0:00 [kworker/u:0H] 8 ? S 0:00 [migration/0] 9 ? S 0:00 [rcu_bh] 10 ? S 0:15 [rcu_sched] 11 ? S< 0:00 [khelper] 12 ? S 0:00 [kworker/u:1] 162 ? S 0:00 [bdi-default] 164 ? S< 0:00 [kblockd] 324 ? S< 0:00 [ata_sff] 334 ? S 0:00 [khubd] 441 ? S< 0:00 [rpciod] 457 ? S 14:51 [kswapd0] 519 ? S 0:00 [fsnotify_mark] 539 ? S< 0:00 [nfsiod] 543 ? S< 0:00 [cifsiod] 558 ? S< 0:00 [crypto] 768 ? S< 0:00 [deferwq] 797 ? S<s 0:00 /sbin/udevd --daemon 960 ? S 0:00 [scsi_eh_0] 962 ? S< 0:00 [mpt_poll_0] 963 ? S 0:00 [scsi_eh_1] 965 ? S< 0:00 [mpt/0] 1012 ? S 0:00 [scsi_eh_2] 1013 ? S 0:00 [usb-storage] 1018 ? S 0:00 [scsi_eh_3] 1134 ? Ss 0:00 /usr/sbin/syslogd -m0 1138 ? Ss 0:00 /usr/sbin/klogd -c 3 -x 1168 ? Ss 0:00 /sbin/dhcpcd -t 10 -h Silencio -L eth0 1184 ? Ss 0:00 /sbin/rpc.portmap 1190 ? Ss 0:00 /sbin/rpc.statd 1204 ? Ss 0:00 /usr/sbin/inetd 1213 ? Ss 0:00 /usr/sbin/acpid 1223 ? Ss 0:00 /usr/bin/dbus-daemon --system 1228 ? Ss 0:00 /usr/sbin/crond -l notice 1230 ? Ss 0:00 /usr/sbin/atd -b 15 -l 1 2094 ? Sl 0:29 /usr/local/bin/vmtoolsd 2132 ? Sl 1:03 /usr/local/sbin/emhttp 2138 ? S 0:00 /bin/bash /boot/unmenu/uu 2139 ? S 0:00 logger -tunmenu -plocal7.info -is 2247 ? S< 0:00 [md] 2248 ? S 0:00 [mdrecoveryd] 2251 ? S 0:00 [spinupd] 2252 ? S 0:00 [spinupd] 3905 ? S 6:36 [unraidd] 4390 ? S< 0:16 [kworker/0:1H] 4392 ? S< 0:00 [reiserfs] 5704 ? Ssl 100:56 /usr/local/sbin/shfs /mnt/user -disks 16777214 -o noatime,big_writes,allow_other -o remember=330 5852 tty1 Ss+ 0:00 /sbin/agetty 38400 tty1 linux 5853 tty2 Ss+ 0:00 /sbin/agetty 38400 tty2 linux 5854 tty3 Ss+ 0:00 /sbin/agetty 38400 tty3 linux 5855 tty4 Ss+ 0:00 /sbin/agetty 38400 tty4 linux 5856 tty5 Ss+ 0:00 /sbin/agetty 38400 tty5 linux 5857 tty6 Ss+ 0:00 /sbin/agetty 38400 tty6 linux 6846 ? Ss 0:00 /usr/sbin/sshd 10598 ? S 0:00 awk -W re-interval -f ./unmenu.awk 13935 ? S 0:06 [kworker/0:3] 14626 ? Ss 0:00 SCREEN -R 14627 pts/1 Ss 0:00 /bin/bash 14766 pts/2 Ss+ 0:00 /bin/bash 16455 ? D 0:06 sync 17043 ? S< 0:00 /sbin/udevd --daemon 18011 pts/3 Ss 0:00 /bin/bash 18271 pts/3 S+ 0:06 /bin/bash ./preclear_disk.sh /dev/sdc 18292 ? Ss 0:00 sshd: root@pts/0 18320 pts/0 Ss 0:00 -bash 18700 pts/0 S+ 0:00 screen -r 14626.2TB-Green 18960 pts/4 Ss 0:00 /bin/bash 19898 ? S 0:00 gawk -v ConfigFile unmenu.conf -v MyHost Silencio -v ScriptDirectory /boot/unmenu -v AWK_PID -v LocalConfigFile unmenu_local.conf -v MyPort 8080 -W re-interval -f unmenu.base.lib.awk -f utility.lib.awk -f /boot/unmenu/08-unmenu-array_mgmt.awk STARTED GET /array_management?stop_array=Stop+Array |Main|array_management|Array Management|disk_management|Disk Management|system_log|Syslog|myMain|myMain|links|Useful Links|disk_performance|Disk Performance|network_performance|Network Performance|usage|Disk Usage|smarthistory|Smart History|dupe_files|Dupe Files|sys_info|System Info|file_browser|File Browser|share_iso|Share ISO|user_scripts|User Scripts|config_view_edit|Config View/Edit|pkg_manager|Pkg Manager|unraid_main|unRAID Main|about|About|help|Help| 19911 ? D 0:03 sync 21174 pts/4 S+ 0:06 /bin/bash ./preclear_disk.sh /dev/sde 22221 ? S< 0:00 /sbin/udevd --daemon 23236 ? S 0:00 [kworker/0:0] 24207 ? S 0:00 [kworker/0:1] 24591 pts/3 S+ 0:00 /bin/bash ./preclear_disk.sh /dev/sdc 24650 pts/3 S+ 0:00 /bin/bash ./preclear_disk.sh /dev/sdc oerror s/3 D+ 0:00 dd if=/dev/sdc bs=8388608 count=200 skip=12800 conv=n--More-- 24652 pts/3 S+ 0:01 sum 24653 pts/3 S+ 0:00 awk {print $1} 24677 pts/4 S+ 0:00 sleep 10 24682 pts/1 R+ 0:00 ps ax 24683 pts/1 S+ 0:00 more 26229 ? D 1:49 [flush-8:64] 26378 pts/4 D+ 6:55 dd if=/dev/zero bs=2048k seek=1 of=/dev/sde root@Silencio:/var/log# I hoping that I dont have to reboot the server as 2 of my drives are still in the process of preclearing and I'm guessing it would take another day before complete HALP!!

I'm getting 120+MB/s write speed without parity..not sure what you get 20MB/s.

this from unmenu

hi, I just wanna report different between Dynamix stat and Unmenu sysinfo I'm using Intel Xeon 1230v2 Asrock H77 Pro4 MVP I run unraid as ESXI guest, so this maybe the cause but Dynamix report I'm using Pentium PRO 3.3Ghz while Unmenu report correctly that I'm using Xeon 1230v2. It doesnt effect anything and I dont care much about it..but I thought you might want to know. I'm guessing Dynamix saying that I'm using Pentium PRO is due to that Family Member:6