mebrunner24

@Squid - I was able to get up and running thanks to you and @jonathanm. However, as you mentioned previously I'm unable to edit or use the webUI of he docker containers. I had a backup from the CA appdata backup from 3/29/2020. I did a restore of that but it still does not allow me to edit or view the webUI. What can I do to get that functionality back?

@jonathanm - Do i need to check the "Parity is already valid" option here? I have added the disks as they were in a 2019 setup. I do not have a disk 2 anymore I have added my parity drive to parity 2. However, the error on the side saying all existing data will be erased is making me nervous. Is this the right step to do?

@Squid - I jumped the gun and didn't set them in the same order.. Now it says "Too many wrong and/or missing disks!" when I try to add the parity drive back to "Parity 2" I found this forum post. Do I want to preserve any current assignments since I've already shuffled things around?

@Squid - you are correct, it shows up as an unmountable disk So, I need to stop the array and add the drive to parity 2 then?

So also put what I think is the parity drive in here as well? Because when I put what I think is the parity drive it shows me this: Makes me a bit nervous seeing that..

@Squid Is this just "Disk 1, Disk 2, etc.."? I do not have a backup of the USB unfortunately.

@Squid - I used Cisdem for Mac and have the following: Looks like the zip files contain some older setups. Would this be useful for a recovery? Unfortunately, I can't find anything useful in this format. I'm not sure if it was recovered properly or not. I also have one from October 2019 so a little more recent. What should be the next step? - Create a new USB boot drive? - How would I recover the license? - How would I recover my configuration for the docker containers and things like that? - How would I recover the data on my array? Thanks

@Squid - looks like I can't access the USB. Have tried it in a Win10 PC and now a Mac as well. I have a Ubuntu laptop but have not tried that. Unless that'll be easier to get the /config folder later. What would be the next step in order to retrieve the /config folder if possible? Also, I did a restart of the machine and now I can't get the machine to boot up at all. No access to SSH anymore.. I have added a screenshot above. Supermicro X8DTL-3F motherboard MVIMG_20200411_162733.jpg

Okay, ill reach out to you tomorrow whether or not it's accessible

Is there a way to recover a corrupted boot drive if that's the case?

Unfortunately it is not showing up in the /boot/logs folder..

After a restart sometime last week, I lost the ability to access the web UI of my unraid host. I can run Advanced IP Scanner and shows he host, hostname, and IP address as if it were still accessible. I can ping the host, access the host via SSH, and access via winSCP. However, no access to the web UI at all. So none of my docker containers are currently working. Any help would be appreciated.

I've lost the ability to access the webui and I believe it's due to the fact that somehow the "start-script" is looking at the wrong files. 2020-02-02 15:40:56,929 DEBG 'start-script' stdout output: total 16 drwxrwxr-x 1 nobody users 194 Feb 2 15:40 . drwxrwxr-x 1 nobody users 268 Feb 1 18:22 .. -rwxrwxr-x 1 nobody users 39 Feb 2 15:28 credentials.conf -rwxrwxr-x 1 nobody users 1809 Oct 5 2018 us2806_nordvpn_com_ca.crt -rwxrwxr-x 1 nobody users 2822 Feb 2 15:40 us2806.nordvpn.com.tcp443.ovpn -rwxrwxr-x 1 nobody users 602 Oct 5 2018 us2806_nordvpn_com_tls.key I don't recall ever using the us2806 server before. In my /openvpn folder i have the following: credentials.conf us504.nordvpn.com.tcp443.ovpn us504_nordvpn_com_ca.crt us504_nordpvn_com_tls.key I've restarted and stopped the docker image several times. How would I update the start-script? How did this happen? I haven't changed any settings or messed with it. All was fine about a week ago, then randomly it stopped working.

bump

Since installing a pfSense box in my network, I can no longer connect to the binhex-qbittorrentvpn docker. I have tried changing the port 8080 to 8090 or other ports to see if there was some sort of conflict with pfSense and port 8080, but that didn't work. I've also tried installing the linuxserver qbittorrent docker as well and had the same issue.

I did not.. I haven't had the issue since Sent from my Pixel 3 XL using Tapatalk

I have added a new 4TB drive to my system (parity is already 4TB). I am able to see the drive in "unassigned devices". However, I lost my preexisting drive that was already configured. They are going through an LSI 9211-8i which I flashed to IT mode. When I remove the new drive from the system, every thing boots up just fine. What do I need to do to configure my new drive and not lose my preexisting drive?

Thank you, this solved my issue

So I should be able to disable docker, check the delete image file, then re-install/enable my previous docker containers with the existing settings that I had on them? Sorry for the questions, just concerned

So I would delete the docker.img which would allow me to setup the docker containers again using the feature Previous Apps? I can't recall seeing that prior.

diagnostics added brunhome-diagnostics-20181230-2052.zip

I've read a few other posts here about people having to delete the docker.img file. I really hope that's not the case as I have about 15+ dockers that I use and would not want to go through all those setups again. Many had odd changes that needed to be made to work properly. Is there a way to get back into the edit page and save them as templates? edit: diognostics added brunhome-syslog-20181230-2020.zip brunhome-diagnostics-20181230-2052.zip