thogarth

I had a power outage yesterday and since then a few of my dockers dont work. My server is connected to a UPS and should have done a clean shutdown. When I powered on for the first time, I noticed that my cache drive was not mounted so I remounted. One of my dockers (sonarr) gave me this error in the log "[v4.0.5.1710] NzbDrone.Core.Datastore.CorruptDatabaseException: Sonarr failed to start: Database file: /config/sonarr.db is corrupt, restore from backup if available. See: https://wiki.servarr.com/sonarr/faq#i-am-getting-an-error-database-disk-image-is-malformed" a few others are not working either. Is there an easy fix? I have attached my diagnostics. You can ignore the disk 7 not being installed/mounted I hadn't properly added it to my array before the outage and it contains no array data. Thanks garthplex-diagnostics-20240717-1631.zip

...Maybe getting ahead of myself, but I really dont want to go much longer without a parity drive. Assuming I cant get the PCIE SATA expansion to show up, can I replace two of my harddrives with one bigger one? Or is that too sketchy without parity? I have the following.. 12TB, 8TB, 8TB, 8TB, 4TB I would like to replace and 8 and 4 TB with one 12TB. And that will allow enough sata ports to have my parity drive again. But not sure how I would do this without any more SATA room. Can I do this with the new 12TB connected via USB?

ended up going into my bios and it doesn't seem to be detecting the pcie card. I've also tried a new card and it wont detect that either. I've tried both PCIE cards in all slots and its not detecting. Could my mobo be toast?

Removed the NVME and still unable to get the Parity to show up. Any other ideas?

Yes the NVME is a somewhat new addition. When I added it a few months ago it wouldn't consistently be detected to mount and so I just ignored it for a while. Now it consistently shows up to mount so I could see that being the issue. What would my best next step be? Just remove the NVME or can I tell my system not to let it take over a SATA slot?

My parity drive disappeared recently and need help trouble shooting... - Parity drive is connected to mother board via PCIE - I've tried connecting the drive to one of my other SATA slots and it can be discovered that way - I don't have enough SATA slots to work around without my PCIE Sata card - I replaced the PCIE sata card thinking that may be the issue - New PCIE SATA card shows up in BIOS, but parity still wont show up on UNRAID What else should I be doing to troubleshoot, I have attached my diagnositics Thank you garthplex-diagnostics-20230910-2138.zip

Having issues with a drive that is "unmountable". I haven't had any issues with any drives in the past. This happened after a recent reboot. Any support would be greatly appreciated. Thanks garthplex-diagnostics-20220919-1323.zip

Thank you! this worked

at the bottom of the syslog it says Feb 11 16:57:30 Garthplex kernel: vfio-pci 0000:01:00.0: BAR 3: can't reserve [mem 0x72000000-0x73ffffff 64bit pref] ### [PREVIOUS LINE REPEATED 1076522 TIMES] ### Feb 11 16:57:43 Garthplex kernel: vfio-pci 0000:01:00.0: BAR 3: can't reserve [mem 0x I have attached a new diagnostics file just in case garthplex-diagnostics-20210212-1022.zip

When I start my VM my syslog fills up. I recently made some changes and am looking for support on how to fix this. - Added M.2 pcie SSD (currently unassigned, but my intent is to move my VM onto it and keep it outside the array) - My GPUs switched pcie lanes on the mobo. (moved the one I am using (NVIDIA) to the faster one). The other GPU doesn't really get used (AMD) I have attached my syslog, any help would be greatly appreciated. garthplex-diagnostics-20210211-1716.zip Thanks!