WhazZzZzup17

Thanks, I'm just looking for a box. My only question is, can I use my same specs with the LSI controllers? I don't know how the front and backplanes work with so many drives. Is it just one cord for the front and one cord for the back that connect to (1) LSI raid controller. I have two currently. I'm new to chasis, so any help would be great. I'm looking at a 36 bay with sever rails and I have heard they are noisy so I would focus on a power supply with SQ within the model number

I'm more interested in buying a chasis to use more drives and the hot swappable is a big plus. I have a new empty rack, so this unit which is 4 units will fit on my rack. The power consumption of 10 dollars more a month for the CPU isn't a big deal breaker. I'm okay using my parts assuming everything will work, but I'm not sure. My raid connectors have no more spots, but I'm assuming with these supermicro boxes I just need to connect the back and front plane and I'm fine? All I need is a box. Do you have an alternative with swappable drives? Also, the link you posted is for (1) CPU and this build has 2 CPU's. If that makes this a lot faster, the extra hundred bucks for the internals isn't a dealbreaker because I can repurpose my current server. Would I be able to use my current LSI raid controllers though? as I heaard the AOC-S2208L-H8IR 8 Ports SATA SASmay have issues. My current system is just a computer box with no swappable. This box runs 400-500 barebones.

Hello, I'm struggling looking for the correct Supermicro Chasis to purchase. Basically I have a computer that I use for my server with 15 drives and I need a bigger box for my drives. I have a new rack delivered recently. I currently have an i5-3570k and 16gb ram with (2) LSI SAS 9207-8i SATA. Since I'm new to this, can someone confirm I can purchase a box similar to the one below and use it straight out of the box? I'm looking for the SQ power supply too to keep the system quiet. There are multiple box types ranging around 500-550 with shipping. The link below seems to come with a full server and rails, but not sure if I need anything else and if I can continue to use my same system. This system looks to be faster than mine as well, but not sure. Thanks https://www.ebay.com/itm/Supermicro-4U-36-Bay-LFF-Server-X9DRi-LNF-Xeon-8-core-3-3Ghz-64GB-HW-Raid-5-6-/133417769784

How does one go about changing the theme? Is it as simple as downloading a theme and pasting it into appdata / ubooquity / themes? For some reason when I copy the files into that folder it says access denied. https://vaemendis.github.io/ubooquity-doc/pages/themes.html

Hello, last night I received an error and was wondering if it should be of concern. Apr 30 21:21:10 tower kernel: traps: QtWebEngineProc[13898] trap int3 ip:14c187645413 sp:7ffcbc102520 error:0 in libQt5WebEngineCore.so.5[14c1850c7000+6c4e000]

Hello, for the life of me I can't get my calibre-web to work outside with LetsEncrypt + DuckDNS + nginx? Does anyone know why? 1. I right clicked the LetEncrypt App and clicked edit and added my new duckdns to the subdomains (lets say calibrewebDNS) 2. I right clicked the DuckDNS App and clicked edit and added my new duckdns to the subdomains (lets say calibrewebDNS) 3. I then navigated to my appdata>letsencrypt>nginx>proxy-config and made a copy of calibre-web.subdomain.conf.sample and removed .sample from the end of the file. 4. Finally I edited the file with notepad and replaced "server_name calibre-web.*;" with "server_name calibrewebDNS.*;" I cant access the webui from calibrewebdns.duckdns.org

Hello, I have a couple questions about setting up Calibre-Web with my LetsEncrypt. Below is my current config for Calibre-Web. Question 1 - My letsencrypt>nginx>proxy-confs has (2) files calbre-web.subdomain.conf.sample calibre-web.subfolder.conf.sample Which one these do I modify? I found this code on the github, but I'm not sure what I do with the information already on the file or which file to modify from above. location /calibre-web { proxy_pass http://<your-ip>:8083; proxy_set_header Host $http_host; proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for; proxy_set_header X-Scheme $scheme; proxy_set_header X-Script-Name /calibre-web; }

I just copied it all over. But now I'm getting Array stopped - Too many devices The registered GUID does not match the USB Flash boot device GUID. Do I need to replace a new key?

I just installed Unraid on a new flash drive with the USB unraid tool, inserted within my unraid server and it looks like everything is working correctly other than it being a fresh install. I also inserted my old USB within my windows computer and copied the whole USB to a backup dictionary. Are you saying I can just copy the config folder from the old USB to the new USB and im done? Thanks

I inserted the USB within my windows 10 and immediately it said there was errors. It ran a check and came back saying no errors. Re-inserted within Unraid and it is stuck on loading /bzroot

I'm thinking the same thing. I'm in the process of installing UNRAID on a new flash drive. Never have done this before and I'm not sure I backedup my flashdrive, so I don't know how to transfer my key, but I'll have feedback in the next couple minutes. How do you go about running chkdsk? Do I need to power down and do that through my windows 10 machine?

I have since restarted my server and booted up in GUI mode. Now it is telling me all my disks are missing, yet they all boot up when restarting the server. It also shows the disk as "unassigned". The array cant be started and saying it's a stale configuration. My log is printing a red error which reads Tower Kernal: print_req_error: I/0 error, dev sda, sector 9476128 I still cant connect to unraid web ui from my desktop.

This morning I woke up to my desktop computer unable to connect to my unraid server via the browser or file manager. I then went to my server machine and did a reset from my Unraid machine by typing "powerdown -r" After this, my unraid machine wouldn't start and stopped at "Loading /bzimage...". After a few hours of hard resets I finally got it to boot up after removing the USB and putting it into a different USB port Now my unraid shows my ip address and login on the server monitor, but I still can't connect to it via my other computers. I'm afraid to restart or it may not get back to this page and stuck at "Loading /bzimage..." Also on my Unraid server monitor, if I try to login, it freezes for about 1 min and does nothing. What do i do?

Will do thanks. Been like this for years, so I assumed I was missing something. Thanks

I have been using JDownloader for a while, but on Unraid when I paste multiple links within the clipboard window, my Jdownloader browser window goes white. It only works if I paste less than 10 links within the window. Is there anyway to prevent this or have Jdownloader reference a text file with more links? The jdownloader I am using is - by jlesage

Thank you for your help.

Thank you for the help. I will do as suggested. My one concern is I have no idea how to verify if any files are corrupted. I have so many pictures and it will be hard to review each file upon the completion of the re-build. How do you go about comparing thousands of files with their checksums? I used RCLONE in the past to backup my data offline. Does rclone do this?

I have never had a failed hard drive. Would you recommend that before I replace the drive, I copy the contents to the new hard drive and then replace, or should I just remove the failed drive and the parity should re-create the contents from the removed damage drive? I also have offsite backups of the drive, however, my backup is about a month old and there are new files that I haven't backed up.

In other words, I should backup the files and replace the drive? Is there a chance that any of the files are corrupt?

I'm receiving errors on my server. Any help would be great. md: disk12 read error, sector=4099723704 md: disk12 read error, sector=4099723712 md: disk12 read error, sector=4099723720 md: disk12 read error, sector=4099723728 md: disk12 read error, sector=4099723736 md: disk12 read error, sector=4099723744 md: disk12 read error, sector=4099723752 sd 2:0:1:0: [sdj] tag#4112 UNKNOWN(0x2003) Result: hostbyte=0x00 driverbyte=0x08 sd 2:0:1:0: [sdj] tag#4112 Sense Key : 0x3 [current] sd 2:0:1:0: [sdj] tag#4112 ASC=0x11 ASCQ=0x0 sd 2:0:1:0: [sdj] tag#4112 CDB: opcode=0x88 88 00 00 00 00 00 f4 5c d1 20 00 00 00 d0 00 print_req_error: critical medium error, dev sdj, sector 4099723552 md: disk12 read error, sector=4099723488 md: disk12 read error, sector=4099723496 md: disk12 read error, sector=4099723504 md: disk12 read error, sector=4099723512 md: disk12 read error, sector=4099723520 md: disk12 read error, sector=4099723528 md: disk12 read error, sector=4099723536 md: disk12 read error, sector=4099723544 md: disk12 read error, sector=4099723552 md: disk12 read error, sector=4099723560 md: disk12 read error, sector=4099723568 md: disk12 read error, sector=4099723576 md: disk12 read error, sector=4099723584 md: disk12 read error, sector=4099723592 md: disk12 read error, sector=4099723600 md: disk12 read error, sector=4099723608 md: disk12 read error, sector=4099723616 md: disk12 read error, sector=4099723624 md: disk12 read error, sector=4099723632 md: disk12 read error, sector=4099723640 md: disk12 read error, sector=4099723648 md: disk12 read error, sector=4099723656 md: disk12 read error, sector=4099723664 md: disk12 read error, sector=4099723672 md: disk12 read error, sector=4099723680 md: disk12 read error, sector=4099723688 # ATTRIBUTE NAME FLAG VALUE WORST THRESHOLD TYPE UPDATED FAILED RAW VALUE 1 Raw read error rate 0x000f 118 090 006 Pre-fail Always Never 185652816 3 Spin up time 0x0003 095 093 000 Pre-fail Always Never 0 4 Start stop count 0x0032 095 095 020 Old age Always Never 5767 5 Reallocated sector count 0x0033 100 100 010 Pre-fail Always Never 336 7 Seek error rate 0x000f 073 060 030 Pre-fail Always Never 24203337 9 Power on hours 0x0032 077 077 000 Old age Always Never 20960 (2y, 4m, 21d, 8h) 10 Spin retry count 0x0013 100 100 097 Pre-fail Always Never 0 12 Power cycle count 0x0032 100 100 020 Old age Always Never 483 183 Runtime bad block 0x0032 100 100 000 Old age Always Never 0 184 End-to-end error 0x0032 100 100 099 Old age Always Never 0 187 Reported uncorrect 0x0032 096 096 000 Old age Always Never 4 188 Command timeout 0x0032 100 099 000 Old age Always Never 1 1 1 189 High fly writes 0x003a 035 035 000 Old age Always Never 65 190 Airflow temperature cel 0x0022 071 058 045 Old age Always Never 29 (min/max 17/34) 191 G-sense error rate 0x0032 100 100 000 Old age Always Never 0 192 Power-off retract count 0x0032 100 100 000 Old age Always Never 68 193 Load cycle count 0x0032 051 051 000 Old age Always Never 99166 194 Temperature celsius 0x0022 029 042 000 Old age Always Never 29 (0 12 0 0 0) 197 Current pending sector 0x0012 100 099 000 Old age Always Never 24 198 Offline uncorrectable 0x0010 100 099 000 Old age Offline Never 24 199 UDMA CRC error count 0x003e 200 200 000 Old age Always Never 0 240 Head flying hours 0x0000 100 253 000 Old age Offline Never 4250h+12m+19.153s 241 Total lbas written 0x0000 100 253 000 Old age Offline Never 21172257942 242 Total lbas read 0x0000 100 253 000 Old age Offline Never 217201527283

I'm trying to sync disk4 within my array with an external disk that shows up in unassigned disk, so the external mirrors disk4. I think I have the code right, but any help please. I'm getting an error : error reading source directory: directory not found rclone sync /mnt/disk4/pictures/ /mnt/disks/external2/pictures/

I'm having issues for best practices connecting to server files over wifi from my phone. <- I don't need to connect outside of my wifi. I am able to connect and view shares as normal, but only if I make all shares "Export - Yes" instead of my default "Export - Yes (Hidden)". With this being said, I have multiple users and I don't want to make every share viewable, as other users can now see them even if theycan't access them. Is there a best practice to this, so I don't show all these shares and only see the shares I have access to? I can also setup my file explorer on my phone to map each location if they're "Export - Yes (Hidden)", but then they're not group together within one "Lan/SMB" and makes me have multiple cloud/lan/smb logins which is hard to navigate. Is there something I can create, such as a "rootshare" but for a specific user and for only shares he/she has access to ?

Looks like I fixed it. I had to make a new duckdns for whatever reason

I've followed SpaceInvader videos regarding Nextcloud/Letsencrypt/Duckdns reverse proxy and I'm trying to mimic it for bitwarden to access outside of network but I can't get it working. I think I'm stuck on the config. my settings for bitwarden Network Type - Custom myserver123 Container Port - 8888 - changed from default 80 my nginx proxy config - Server_name is a sample for duck dns, such myserver123bitwarden.duckdns.org # make sure that your dns has a cname set for bitwarden and that your bitwarden container is not using a base url server { listen 443 ssl; listen [::]:443 ssl; server_name myserver123bitwarden.*; include /config/nginx/ssl.conf; client_max_body_size 128M; # enable for ldap auth, fill in ldap details in ldap.conf #include /config/nginx/ldap.conf; location / { # enable the next two lines for http auth #auth_basic "Restricted"; #auth_basic_user_file /config/nginx/.htpasswd; # enable the next two lines for ldap auth #auth_request /auth; #error_page 401 =200 /login; include /config/nginx/proxy.conf; resolver 127.0.0.11 valid=30s; set $upstream_bitwarden bitwarden; proxy_pass http://$upstream_bitwarden:8888; } location /notifications/hub { include /config/nginx/proxy.conf; resolver 127.0.0.11 valid=30s; set $upstream_bitwarden bitwarden; proxy_pass http://$upstream_bitwarden:8888; proxy_set_header Upgrade $http_upgrade; proxy_set_header Connection "Upgrade"; } location /notifications/hub/negotiate { include /config/nginx/proxy.conf; resolver 127.0.0.11 valid=30s; set $upstream_bitwarden bitwarden; proxy_pass http://$upstream_bitwarden:8888; } }

You rock. Thank you