[Problem with docker container in unraid 6.8.2 (need help)]

If i use the either "steam lan cache" or "steam cache bundle" they seem not to work with unraid 6.8.2 (prob im doing something wrong), but they did work with unraid 6.7.1 (@100mbps) and as i updated to 6.8.2 i did a fresh install formatted all drives (cause im still in the setup stage) and opted to use the 10gbps connection only, SMB works fine from my pc's ssd to the array about 550mb/s and thats cause the ssd's speed is 550mb/s read also i know the box has internet connection cause i installed the docker containers

i did tried lot of settings and ip's and docker container network modes, also i really dont want to go back to 6.7.1 cause the smb was a bit wonky for me there and cause the docker speed was as fast as my connection so no win there

 

Model: Custom

M/B: ASUSTeK COMPUTER INC. Z10PA-D8 Series Version Rev 1.xx

BIOS: American Megatrends Inc. Version 3801. Dated: 08/23/2019

CPU: Intel® Xeon® CPU E5-2603 v4 @ 1.70GHz (2 of them)

HVM: Enabled

IOMMU: Enabled

Cache: 384 KiB, 1536 KiB, 15360 KiB, 384 KiB, 1536 KiB, 15360 KiB

Memory: 64 GiB DDR4 Multi-bit ECC (32gb per cpu)

Network: bond0: fault-tolerance (active-backup), mtu 1500
 eth0: interface down
 eth1: 10000 Mbps, full duplex, mtu 1500

Kernel: Linux 4.19.98-Unraid x86_64

OpenSSL: 1.1.1d

[[Support] Josh.5 Docker Templates]

Im probably doing something wrong, but if i use this docker container with unraid version 6.8.2 it just does not work nor does the steam cache bundle, but if i use it with 6.7.1 it works but with very low lan speed (100Mbps max) (also then smb works with max 1Gbps speed) what makes it useless cause my isp provides me with 100/20 connection and thats fatser then what i get from my unraid box limited by something software cause i have a 10Gbps fiber connection to the box

 

anyone have any ideas ? ive tryied different network modes and different settings on all network adapters

 

M/B: ASUSTeK COMPUTER INC. Z10PA-D8 Series Version Rev 1.xx

BIOS: American Megatrends Inc. Version 3801. Dated: 08/23/2019

CPU: Intel® Xeon® CPU E5-2603 v4 @ 1.70GHz (two of them)

HVM: Enabled

IOMMU: Enabled

Cache: 384 KiB, 1536 KiB, 15360 KiB, 384 KiB, 1536 KiB, 15360 KiB

Memory: 64 GiB DDR4 Multi-bit ECC (32gb each)

Network: bond0: fault-tolerance (active-backup), mtu 1500
 eth0: interface down (intel i210 x2 one disabled in bios)
 eth1: 10000 Mbps, full duplex, mtu 1500 (mellanox connect x4 if i remember right)

Kernel: Linux 4.19.98-Unraid x86_64

OpenSSL: 1.1.1d