Phill360

tower-diagnostics-20260706-2325.zip Hi all. I'm currently rebuilding disk 2 after a drive failure but in the process of the rebuild I'm now getting a lot of disk errors on disk 7 with a few issues on disk 4 also. What is the best course of action now I'm having these issues?

After many attempts I have worked out what the issue is. Turns out one of the ports on HBA controller is playing up. I swapped the cables into the other ports and the issue followed the port. I have now unplugged all drives from the port with the issue and the parity sync is now processing successfully but my cache port has no port to plug into. Time to buy new HBA Controller.

Thanks. I'll look into this tonight when I get back from work.

Hi all, I'm dealing with a parity sync that is running extremely slowly — under 2MB/s with an estimated completion time of 80 days. Here's the sequence of events that led to this: 1. Parity drive failed and was replaced but sync was not ran. 2. The following day, Disk 5 showed as unmountable:Wrong or no file system. 3. I ran Check Filesystem in Maintenance Mode and applied the fixes, which appeared to resolve the issue. 4. Started a parity sync, but it ran at under 2MB/s and never improved after runnning for 5 Hours. 5. Stopped the sync and ran Check Filesystem in Mintenance Mode again — more errors were found. 6. Applied fixes again, but the same slow sync behaviour repeated. It seems like there may be an underlying issue with Disk 5 that keeps resurfacing. Has anyone seen this pattern before? What would be the recommended next step? Any help is appreciated. Thanks tower-diagnostics-20260420-2253.zip

I did notice it was filling up and I think it is due to JellyFin metadata. I another issue I need to fix

In the process of doing it. I only have Appdata on it currently. I have stopped docker and I'm using Unbalanced to move it to the array

root@Tower:~# lsblk NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINTS loop0 7:0 0 651.6M 1 loop /usr loop1 7:1 0 173.4M 1 loop /lib sda 8:0 1 28.6G 0 disk └─sda1 8:1 1 28.6G 0 part /boot sdb 8:16 0 3.6T 0 disk └─sdb1 8:17 0 3.6T 0 part sdc 8:32 0 894.3G 0 disk └─sdc1 8:33 0 894.3G 0 part /mnt/cache sdd 8:48 0 5.5T 0 disk └─sdd1 8:49 0 5.5T 0 part sde 8:64 0 447.1G 0 disk └─sde1 8:65 0 447.1G 0 part /mnt/disks/Plex_Data sdf 8:80 0 7.3T 0 disk └─sdf1 8:81 0 7.3T 0 part sdg 8:96 0 9.1T 0 disk └─sdg1 8:97 0 2T 0 part sdh 8:112 0 3.6T 0 disk └─sdh1 8:113 0 3.6T 0 part sdi 8:128 0 3.6T 0 disk └─sdi1 8:129 0 3.6T 0 part sdj 8:144 0 5.5T 0 disk └─sdj1 8:145 0 5.5T 0 part sdk 8:160 0 7.3T 0 disk └─sdk1 8:161 0 7.3T 0 part sdl 8:176 0 9.1T 0 disk └─sdl1 8:177 0 9.1T 0 part md1p1 9:1 0 7.3T 0 md /mnt/disk1 md2p1 9:2 0 7.3T 0 md /mnt/disk2 md3p1 9:3 0 5.5T 0 md /mnt/disk3 md4p1 9:4 0 3.6T 0 md /mnt/disk4 md5p1 9:5 0 3.6T 0 md /mnt/disk5 md6p1 9:6 0 3.6T 0 md /mnt/disk6 md7p1 9:7 0 5.5T 0 md /mnt/disk7 zram0 252:0 0 0B 0 disk

I replaced the cache a few month back and I must not have reformatted the drive. I will correct this soon.

Sorry. I added diagnostic to original post.

I’m having an issue with a few folders in Unraid. One folder, for example, mnt/user/Media, shows no files even though it contains them. However, mnt/drive1/Media does show files allocated to that drive. I’ve checked permissions but that doesn’t seem to be the problem. Does anybody know how I ca fix this? Note. I have replaced my USB drive recently tower-diagnostics-20260125-1342.zip

I'm having an issue with Binhex-Plex docker issue not recognising plugins (Webtools). I have copied the webtools bundle into the Plugins directory binhex-plex\Plex Media Server\Plugin-in\WebTools.bundle Plex will not show Webtools under Plugins under Settings. I have copied the same bundle across to a fresh install Plex docker from linuxserver under a different directory as it seems to have a different directory structure and it showed up in the plugins. Any ideas? Edit: I found the issue. I forgot that I moved the Plex data to a unassigned device