nisbne

mind sharing ?

hi guys, wanting to add the backup feature in for palworld, is it as easy as adding the following to the Extra Game Parameters line in the docker ? -useperfthreads -NoAsyncLoadingThread -UseMultithreadForDS -queryport=27015 -BACKUP=true -BACKUP_INTERVAL=120 -BACKUP_TO_KEEP=12 looks like this when i start the docker?

amazing -L corrected the issue. id say the drive i replaced is fine also going off the smart logs. can i just add it back into the array in a new slot and format it via the webgui when prompted?

hi @trurl, sorry i copied that from the help guide site. the exact command on terminal was : xfs_repair -v /dev/sdf & xfs_repair -v /dev/sdd. i will run it via webui with the -n now and come back with results. yes i still have the original drive here. edit: as requested ive re run via webui with -n and posting full results. sdd ( drive i replaced yesterday) sdf ( drive is a few months old ) sddlog.txt sdflog.txt

hi all, i had a drive pop up saying it was "Device is disabled, contents emulated", i read the guide a guide on here to stop the arrary remove the device start,stop and rebuild it which i did that completed. this didnt fix so i replaced the drive. the rebuild was successful but after completion the new drive and another drive now showed "Unmountable: Unsupported or no file system". i have now started the array in maintenance mode and ran xfs_repair -v /dev/mdX as per https://docs.unraid.net/unraid-os/manual/storage-management/#repairing-a-file-system one drive has finished so far with the error: "Sorry, could not find valid secondary superblock Exiting now." the other drive is going still but i assume it will also fail. so im reaching out for help on next steps. attached is my diag file. any help would be greatly appreciated. edit: i first ran fs check via gui they both failed: sdf: Inode allocation btrees are too corrupted, skipping phases 6 and 7 No modify flag set, skipping filesystem flush and exiting. sdd:Inode allocation btrees are too corrupted, skipping phases 6 and 7 Maximum metadata LSN (17:2383993) is ahead of log (17:2367489). Would format log to cycle 20. No modify flag set, skipping filesystem flush and exiting. after that i ran via tower-diagnostics-20240109-1200.zip

hi all, as others have mention, my syslog is getting flooded with these error messages, any idea on a fix? i have disable the plugin for now, please let me know if i can supply any other info to assist Apr 29 11:44:52 Tower kernel: resource sanity check: requesting [mem 0x000c0000-0x000fffff], which spans more than PCI Bus 0000:00 [mem 0x000c0000-0x000dffff window] Apr 29 11:44:52 Tower kernel: caller _nv000908rm+0x1bf/0x1f0 [nvidia] mapping multiple BARs root@Tower:~# nvidia-smi -x -q <?xml version="1.0" ?> <!DOCTYPE nvidia_smi_log SYSTEM "nvsmi_device_v10.dtd"> <nvidia_smi_log> <timestamp>Wed Apr 29 11:58:40 2020</timestamp> <driver_version>440.59</driver_version> <cuda_version>10.2</cuda_version> <attached_gpus>1</attached_gpus> <gpu id="00000000:06:00.0"> <product_name>GeForce GTX 1650 SUPER</product_name> <product_brand>GeForce</product_brand> <display_mode>Disabled</display_mode> <display_active>Disabled</display_active> <persistence_mode>Disabled</persistence_mode> <accounting_mode>Disabled</accounting_mode> <accounting_mode_buffer_size>4000</accounting_mode_buffer_size> <driver_model> <current_dm>N/A</current_dm> <pending_dm>N/A</pending_dm> </driver_model> <serial>N/A</serial> <uuid>GPU-603c37b8-6a15-4062-1b3e-29ff3afcea1d</uuid> <minor_number>0</minor_number> <vbios_version>90.16.46.00.DE</vbios_version> <multigpu_board>No</multigpu_board> <board_id>0x600</board_id> <gpu_part_number>N/A</gpu_part_number> <inforom_version> <img_version>G001.0000.02.04</img_version> <oem_object>1.1</oem_object> <ecc_object>N/A</ecc_object> <pwr_object>N/A</pwr_object> </inforom_version> <gpu_operation_mode> <current_gom>N/A</current_gom> <pending_gom>N/A</pending_gom> </gpu_operation_mode> <gpu_virtualization_mode> <virtualization_mode>None</virtualization_mode> <host_vgpu_mode>N/A</host_vgpu_mode> </gpu_virtualization_mode> <ibmnpu> <relaxed_ordering_mode>N/A</relaxed_ordering_mode> </ibmnpu> <pci> <pci_bus>06</pci_bus> <pci_device>00</pci_device> <pci_domain>0000</pci_domain> <pci_device_id>218710DE</pci_device_id> <pci_bus_id>00000000:06:00.0</pci_bus_id> <pci_sub_system_id>401B1458</pci_sub_system_id> <pci_gpu_link_info> <pcie_gen> <max_link_gen>3</max_link_gen> <current_link_gen>3</current_link_gen> </pcie_gen> <link_widths> <max_link_width>16x</max_link_width> <current_link_width>8x</current_link_width> </link_widths> </pci_gpu_link_info> <pci_bridge_chip> <bridge_chip_type>N/A</bridge_chip_type> <bridge_chip_fw>N/A</bridge_chip_fw> </pci_bridge_chip> <replay_counter>0</replay_counter> <replay_rollover_counter>0</replay_rollover_counter> <tx_util>1000 KB/s</tx_util> <rx_util>4000 KB/s</rx_util> </pci> <fan_speed>53 %</fan_speed> <performance_state>P0</performance_state> <clocks_throttle_reasons> <clocks_throttle_reason_gpu_idle>Not Active</clocks_throttle_reason_gpu_idle> <clocks_throttle_reason_applications_clocks_setting>Not Active</clocks_throttle_reason_applications_clocks_setting> <clocks_throttle_reason_sw_power_cap>Not Active</clocks_throttle_reason_sw_power_cap> <clocks_throttle_reason_hw_slowdown>Not Active</clocks_throttle_reason_hw_slowdown> <clocks_throttle_reason_hw_thermal_slowdown>Not Active</clocks_throttle_reason_hw_thermal_slowdown> <clocks_throttle_reason_hw_power_brake_slowdown>Not Active</clocks_throttle_reason_hw_power_brake_slowdown> <clocks_throttle_reason_sync_boost>Not Active</clocks_throttle_reason_sync_boost> <clocks_throttle_reason_sw_thermal_slowdown>Not Active</clocks_throttle_reason_sw_thermal_slowdown> <clocks_throttle_reason_display_clocks_setting>Not Active</clocks_throttle_reason_display_clocks_setting> </clocks_throttle_reasons> <fb_memory_usage> <total>3911 MiB</total> <used>0 MiB</used> <free>3911 MiB</free> </fb_memory_usage> <bar1_memory_usage> <total>256 MiB</total> <used>2 MiB</used> <free>254 MiB</free> </bar1_memory_usage> <compute_mode>Default</compute_mode> <utilization> <gpu_util>0 %</gpu_util> <memory_util>0 %</memory_util> <encoder_util>0 %</encoder_util> <decoder_util>0 %</decoder_util> </utilization> <encoder_stats> <session_count>0</session_count> <average_fps>0</average_fps> <average_latency>0</average_latency> </encoder_stats> <fbc_stats> <session_count>0</session_count> <average_fps>0</average_fps> <average_latency>0</average_latency> </fbc_stats> <ecc_mode> <current_ecc>N/A</current_ecc> <pending_ecc>N/A</pending_ecc> </ecc_mode> <ecc_errors> <volatile> <sram_correctable>N/A</sram_correctable> <sram_uncorrectable>N/A</sram_uncorrectable> <dram_correctable>N/A</dram_correctable> <dram_uncorrectable>N/A</dram_uncorrectable> </volatile> <aggregate> <sram_correctable>N/A</sram_correctable> <sram_uncorrectable>N/A</sram_uncorrectable> <dram_correctable>N/A</dram_correctable> <dram_uncorrectable>N/A</dram_uncorrectable> </aggregate> </ecc_errors> <retired_pages> <multiple_single_bit_retirement> <retired_count>N/A</retired_count> <retired_pagelist>N/A</retired_pagelist> </multiple_single_bit_retirement> <double_bit_retirement> <retired_count>N/A</retired_count> <retired_pagelist>N/A</retired_pagelist> </double_bit_retirement> <pending_blacklist>N/A</pending_blacklist> <pending_retirement>N/A</pending_retirement> </retired_pages> <temperature> <gpu_temp>38 C</gpu_temp> <gpu_temp_max_threshold>93 C</gpu_temp_max_threshold> <gpu_temp_slow_threshold>90 C</gpu_temp_slow_threshold> <gpu_temp_max_gpu_threshold>88 C</gpu_temp_max_gpu_threshold> <memory_temp>N/A</memory_temp> <gpu_temp_max_mem_threshold>N/A</gpu_temp_max_mem_threshold> </temperature> <power_readings> <power_state>P0</power_state> <power_management>Supported</power_management> <power_draw>9.06 W</power_draw> <power_limit>100.00 W</power_limit> <default_power_limit>100.00 W</default_power_limit> <enforced_power_limit>100.00 W</enforced_power_limit> <min_power_limit>70.00 W</min_power_limit> <max_power_limit>100.00 W</max_power_limit> </power_readings> <clocks> <graphics_clock>1530 MHz</graphics_clock> <sm_clock>1530 MHz</sm_clock> <mem_clock>6000 MHz</mem_clock> <video_clock>1410 MHz</video_clock> </clocks> <applications_clocks> <graphics_clock>N/A</graphics_clock> <mem_clock>N/A</mem_clock> </applications_clocks> <default_applications_clocks> <graphics_clock>N/A</graphics_clock> <mem_clock>N/A</mem_clock> </default_applications_clocks> <max_clocks> <graphics_clock>2115 MHz</graphics_clock> <sm_clock>2115 MHz</sm_clock> <mem_clock>6001 MHz</mem_clock> <video_clock>1950 MHz</video_clock> </max_clocks> <max_customer_boost_clocks> <graphics_clock>N/A</graphics_clock> </max_customer_boost_clocks> <clock_policy> <auto_boost>N/A</auto_boost> <auto_boost_default>N/A</auto_boost_default> </clock_policy> <supported_clocks>N/A</supported_clocks> <processes> </processes> <accounted_processes> </accounted_processes> </gpu> </nvidia_smi_log>

hi all, ive been getting an error when i restart the docker when it does verson check, so i did a reinstall now i get this any idea how to correct? ---Version Check--- ---FiveM not found, downloading!--- wget: missing URL Usage: wget [OPTION]... ... Try `wget --help' for more options. tar: option requires an argument -- 'f' Try 'tar --help' or 'tar --usage' for more information. mv: cannot move '/serverdata/serverfiles/' to '/serverdata/fx.tar.xz-': Device or resource busy ---Prepare Server--- ---Checking for old logs--- ---Starting Server--- Cannot exec '/serverdata/serverfiles/run.sh': No such file or directory