HarryHeck

I used the "backup/restore Appdata" tool. This copies the temple settings over. I copied the Data folder via resilio. I used the backup/restore tool for bitwarden, the database for nextcloud, nginx proxy all of which are working fine. I am not concerned about the permissions of the actual data folder at this time. Since all errors are reporting files paths within the container. None of the files paths in the php logs are reporting errors to the data directory. Permission denied at /app/www/public/lib/private/Log/File.php

I migrated my nextcloud server to a new box using the backup/restore Appdata. I can login but then I get to the dashboard I get internal errors. The log files are full of permission or no such file and a path. The files are there when I browse, and I compare permissions they are the same as the old server.? Any ideas? #397: *14 FastCGI sent in stderr: "; PHP message: {"reqId":"JZtTZuvGrhU4iFbtogid","level":3,"time":"2023-12-23T09:47:45+00:00","remoteAddr":"MyIPAddress","user":"MyUserNAME","app":"PHP","method":"GET","url":"/apps/dashboard/","message":"fopen(/data/nextcloud.log): Failed to open stream: Permission denied at /app/www/public/lib/private/Log/File.php#82","userAgent":"Mozilla/5.0 (X11; Linux x86_64; rv:109.0) Gecko/20100101 Firefox/118.0","version":"28.0.0.11","data":{"app":"PHP"}}" while reading upstream, client: MyIPAddress, server: _, request: "GET /apps/dashboard/ HTTP/1.1", upstream: "fastcgi://127.0.0.1:9000", host: "nextcloud.mydomain.com"

I have migrated to another unraid server. Everything seems fine said for my Nextcloud. I upgraded to latest version before using the Restore/Backup appdata tool. MariaDB is online and I can connect to my nextclouddb via adminer I can login to the nextcloud instance but I get an internal error at the dashboard. I have tried to manually put the files and contacts url as well making sure it is not only the dashboard. The nginx appdat/log files are full "permission errors". So I looked at the permissions on the old working Nextcloud vs the new I see no difference. Attached is the log file in question. Not sure if there are different step for nextcloud miration. I migrated mariahdb bitwarden nginx proxymanager unifi-controller All of these are working just fine? NGerror2.log

I was wrong machine is not booting. As it stands now I cannot get machine to boot. Video is now not the issue its disks. Even if I try to install windows 10 again. I cannot get the driver to load on a single disk. I can get the .inf e:\ballon\win10\amd64 to load but it doesnt see the disk. What is the proper disk setup for q35? Can i use the .img files form my old vm?

OK q35-51 machine booted multifunction='on'. Had to swap seabios. Still having issues seeing video out. I am just at a loss. This literally used to work. 3060 card works other wise. I just don't get it. tower-diagnostics-20220410-0437.zip

When trying to boot q35 vm without a card it says. Guest has not initialized the display (yet). It never does. So I don't think my q35 ever boots.

OK made a new machine. Called it game. Swapped back to 3060 since the 1070 isn't helping. Friend tested 3060 on his machine display port works just fine. Video card is in its own iommu. I opened xml changed stuff to multifunction. Still no dice black screen )=

OK made a new machine. Called it game. Swapped back to 3060 since the 1070 isn't helping. Friend tested 3060 on his machine display port works just fine. Video card is in its own iommu. I opened xml changed stuff to multifunction. Still no dice black screen )= tower-diagnostics-20220405-2259.zip

IS it ok if my video card and audio are in different iommu groups is that preferred.

IS ti OK Moved my card to another slot. I am unable to change the machine to q35 on my current domain vm. I updated my drivers to the latest. I got rdp working. I can see 1070 in device manager so I'm pretty sure the new drivers took. Selecting Q35-5.1 and trying to save the VM. I get XML error PCI controller with index='0' must be model='pci-root' for this machine type, but model='pci-root' was found instead. New diagnogotics tower-diagnostics-20220331-2345.zip

OK Moved my card to another slot. I am unable to change the machine to q35 on my current domain vm. I updated my drivers to the latest. I got rdp working. I can see 1070 in device manager so I'm pretty sure the new drivers took. Selecting Q35-5.1 and trying to save the VM. I get XML error PCI controller with index='0' must be model='pci-root' for this machine type, but model='pci-root' was found instead. New diagnogotics tower-diagnostics-20220331-2345.zip

You caught me (= . Since I was was having issues with 3060 i re added my 1070 figured If i Got the card I had working at one time I could just swap cards then. Granted it would be nice to get both cards working with onboard igpu as well. 1. I will test the new gpu. 2. I will try and make this change. 3. You lost me here i'm confused. Sorry I'm somewhat of a newb. I am using onboard video via hdmi using the onboard as primary gpu via 9900k intel igpu. 4. I have been moving the card/cards around I will do this again. 5. OK q35 I assume I need to make a new VM to play around with that. Good to know. 6. I have two .rom files on from space invader script one I manually edited via hex editor. 7. I am currently using moonlight to connect to PC and VNC I will try rdp. 8. Drivers may be a little out of date 1070 or even 3060 for sure. 9. I am fully up to date on MB bios. It changed some of my settings once upgraded. I think I have all the proper sv-io and other settings set properly. Been a while )= although.

You caught me (= . Since I was was having issues with 3060 i re added my 1070 figured If i Got the card I had working at one time I could just swap cards then. Granted it would be nice to get both cards working with onboard igpu as well. 1. I will test the new gpu. 2. I will try and make this change. 3. You lost me here i'm confused. Sorry I'm somewhat of a newb. I am using onboard video via hdmi using the onboard as primary gpu via 9900k intel igpu. 4. I have been moving the card/cards around I will do this again. 5. OK q35 I assume I need to make a new VM to play around with that. Good to know. 6. I have two .rom files on from space invader script one I manually edited via hex editor. 7. I am currently using moonlight to connect to PC and VNC I will try rdp. 8. Drivers may be a little out of date 1070 or even 3060 for sure. 9. I am fully up to date on MB bios. It changed some of my settings once upgraded. I think I have all the proper sv-io and other settings set properly. Been a while )= although.

Thanks for your reply ghost. Here is my diagnostics. Any thing else I need to be moar helpful here? tower-diagnostics-20220331-1535.zip

Boot logs -no-user-config \ -nodefaults \ -chardev socket,id=charmonitor,fd=31,server,nowait \ -mon chardev=charmonitor,id=monitor,mode=control \ -rtc base=localtime,driftfix=slew \ -global kvm-pit.lost_tick_policy=delay \ -no-hpet \ -no-shutdown \ -boot strict=on \ -device nec-usb-xhci,p2=15,p3=15,id=usb,bus=pci.0,addr=0x7 \ -device virtio-serial-pci,id=virtio-serial0,bus=pci.0,addr=0x3 \ -blockdev '{"driver":"file","filename":"/mnt/user/domains/Windows 10/vdisk1.img","node-name":"libvirt-4-storage","cache":{"direct":false,"no-flush":false},"auto-read-only":true,"discard":"unmap"}' \ -blockdev '{"node-name":"libvirt-4-format","read-only":false,"cache":{"direct":false,"no-flush":false},"driver":"raw","file":"libvirt-4-storage"}' \ -device virtio-blk-pci,bus=pci.0,addr=0x5,drive=libvirt-4-format,id=virtio-disk2,bootindex=1,write-cache=on \ -blockdev '{"driver":"file","filename":"/mnt/user/domains/Windows 10/vdisk2.img","node-name":"libvirt-3-storage","cache":{"direct":false,"no-flush":false},"auto-read-only":true,"discard":"unmap"}' \ -blockdev '{"node-name":"libvirt-3-format","read-only":false,"cache":{"direct":false,"no-flush":false},"driver":"raw","file":"libvirt-3-storage"}' \ -device virtio-blk-pci,bus=pci.0,addr=0x6,drive=libvirt-3-format,id=virtio-disk3,write-cache=on \ -blockdev '{"driver":"file","filename":"/mnt/user/isos/Win10_1903_V1_English_x64.iso","node-name":"libvirt-2-storage","auto-read-only":true,"discard":"unmap"}' \ -blockdev '{"node-name":"libvirt-2-format","read-only":true,"driver":"raw","file":"libvirt-2-storage"}' \ -device ide-cd,bus=ide.0,unit=0,drive=libvirt-2-format,id=ide0-0-0,bootindex=2 \ -blockdev '{"driver":"file","filename":"/mnt/user/isos/virtio-win-0.1.160-1.iso","node-name":"libvirt-1-storage","auto-read-only":true,"discard":"unmap"}' \ -blockdev '{"node-name":"libvirt-1-format","read-only":true,"driver":"raw","file":"libvirt-1-storage"}' \ -device ide-cd,bus=ide.0,unit=1,drive=libvirt-1-format,id=ide0-0-1 \ -netdev tap,fd=33,id=hostnet0,vhost=on,vhostfd=34 \ -device virtio-net-pci,netdev=hostnet0,id=net0,mac=52:54:00:70:23:b1,bus=pci.0,addr=0x4 \ -chardev pty,id=charserial0 \ -device isa-serial,chardev=charserial0,id=serial0 \ -chardev socket,id=charchannel0,fd=35,server,nowait \ -device virtserialport,bus=virtio-serial0.0,nr=1,chardev=charchannel0,id=channel0,name=org.qemu.guest_agent.0 \ -device usb-tablet,id=input0,bus=usb.0,port=1 \ -vnc 0.0.0.0:0,websocket=5700 \ -k en-us \ -device qxl-vga,id=video0,ram_size=67108864,vram_size=67108864,vram64_size_mb=0,vgamem_mb=16,max_outputs=1,bus=pci.0,addr=0x2 \ -device vfio-pci,host=0000:01:00.0,id=hostdev0,bus=pci.0,addr=0x8 \ -device vfio-pci,host=0000:01:00.1,id=hostdev1,bus=pci.0,addr=0x9 \ -sandbox on,obsolete=deny,elevateprivileges=deny,spawn=deny,resourcecontrol=deny \ -msg timestamp=on 2022-03-31 03:16:43.920+0000: Domain id=3 is tainted: high-privileges 2022-03-31 03:16:43.920+0000: Domain id=3 is tainted: host-cpu char device redirected to /dev/pts/0 (label charserial0)