hardretro

So, just had another crash while moving some media around. Very different sylog capture this time. Can't make sense of any of it. Any help would be awesome. 2021-12-13.csv

So I've been having an issue with my server hardlocking every few days (nothing via SSH, GUI, web, etc) for over a year now. I've tried setting up syslog to flash, but this never seems to actually write anything. Due to work, some personal health issues and a new baby in the house, I've neglected sorting out a dedicated syslog server until now, but finally have a capture (attached). Work I've done in the last year to try to suss out the issue: Swapped from an x399 Threadripper platform to x299 Intel Doubled RAM from 16 to 32 GB Pulled Plex and it's GTX 1660 out of the server into it's own dedicated hardware (now back in since the crashing continued) Kept up to date with unRaid builds, now on 6.10.0-rc2 Currently running Dockers: CrashPlanPRO lidarr MongoDB NginxProxyManager OpenSpeedTest-Server petio Plex-Media-Server radarr sabnzbd sonarr tautulli unifi-controller Any help would greatly appreciated. 2021-12-11.csv

You're an absolute legend. Thanks!

Another kernel panic overnight, screenshot attached. (have had a few over November, but have been so busy with a baby coming that I just didn't have time to get a screengrab and make a post) I was certain I had enabled local syslog server, but it was disabled when I checked now. I have enabled it for when the next kp will undoubtedly happen. Any help would be greatly appreciated.

OK, another failure overnight. Was able to get a screenshot showing a kernel panic (attached). I did setup Syslog to Flash, but I'm not seeing any items in the logs folder on the flash that would be what I'm looking for. The only log in there with a date from the last week is from unbalance. Thanks again for any help.

I thought I had changed the 'Power Supply Idle Control', but upon a further check, i hadn't. That's changed now to Typical Current Idle, and I've enabled syslog to flash.

OK, so just bad luck I suppose. unRaid box was frozen again this morning. No ping, no SSH, couldn't get any display on the connected screen. I've attached the latest Diagnostic download following a hard reboot. Any help would be greatly appreciated. frankenserver-diagnostics-20201029-0804.zip

Thanks! Can't believe I missed that. Set to 2666 now. Will monitor and update.

Diagnostics attached. As a note, I have disabled C-States as suggested elsewhere for Ryzen and Threadripper. frankenserver-diagnostics-20201027-2021.zip

For the past few months, i've been getting system freezes every few weeks. After some inability to get a signal on the attached monitor when freezing, I was able to get a view of some of the error messages, which led me to believe that it was likely RAM related. Mind, the RAM I had in there at the time was 6 years old from an old X99 system originally. I replaced this with some 4x 8GB sticks of Corsair 3600 DDR4, and the issue appeared to go away as I didn't have an issue for over 3 weeks, which was longer than usual. Now tonight, frozen again, but this time the messages on screen were cryptic enough that I haven't the foggiest whats going on. Screenshots of the last messages attached. Any help is greatly appreciated. Specs: Threadripper 2950X X399 Aorus Pro 32GB DDR4 3600 850W Corsair PSU Any other details that would help, I'm happy to provide.